Jump to content

Hidden Benefit Of Watch Repairing!

Geo
 Share

Recommended Posts

Geo Distinguished Member

Geo

Posted
Posted (edited)

In one word"..................... Patience!

Yesterday I decided to replace the rear shock absorbers on my car. This should have been an easy job 'cause is was only seven bolts per side and five of these held on the wheel. Thinks to myself total time for both sides about fifty minutes................wrong! The lower bolts that hold the shocks to the axel took one and a half hours per side to unscrew 3/4". If it hadn't been for "Plus Gas" a four foot lever and PATIENCE they would not have unscrewed.

Thank goodness for the Zen of horology!

Edited by Geo
  • Like 1
Link to comment
Share on other sites
autowind Distinguished Member

autowind

Posted
Posted

Your are right there Geo,  without patience a person will not get far with watch repairing and even if someone has patience,  have they got the touch?  It`s one of the things I like about watches as a hobby, being able to go from wielding a 4ft. wrecking bar to adjusting a hairspring,  talk about extremes.

  • Like 2
Link to comment
Share on other sites
DJW Super WRT Addict

DJW

Posted
Posted

This is my biggest hurdle as I'm not a patient person by nature! Many a time I have to stop working on something and calm my nerves or I will get frustrated and either brake something or loose my mind! :roadrage:  

  • Like 1
Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
Posted

I am an extremely impatient person (just ask my wife) but miraculously watch repairing is my therapy. I am at my most calm when at the bench.

 

Having two teenagers on the other hand......  :growl:

  • Like 1
Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
Posted

Changed the rear springs on my 30 year old rusted up Landrover Series 3 a couple of years back took 2 hours. Recently did my 10 year old Mitsubishi L200 took 2 days, swearing, plus gas, more swearing, heat, even more swearing, angle grinding, references to Roger Mellys Profanisaurus, drilling & swearing!

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Changed the rear springs on my 30 year old rusted up Landrover Series 3 a couple of years back took 2 hours. Recently did my 10 year old Mitsubishi L200 took 2 days, swearing, plus gas, more swearing, heat, even more swearing, angle grinding, references to Roger Mellys Profanisaurus, drilling & swearing!

Ah, a man after my own heart. I too would have used heat, but there was too much rubber nearby.

I'm away to put my old Norton back together tomorrow, at least everything is clean and the majority of the fasteners are new!

Link to comment
Share on other sites
  • 2 weeks later...
Tjaart Member

Tjaart

Posted
Posted

Same here, Being in the motor mechanic bussiness for 23 years and constant fiddling with old cars you must have patience, Seen that SO many times. my rule is ...before you strip.... understand it FIRST, then diagnose THAN you get the hammer  ....   HAMMER: Originally employed as a weapon of war, the hammer now days is used as a kind of divining rod to locate expensive boat parts not far from the object we are trying to "adjust". Available in a variety of sizes, which is typically chosen based on the amount of time you have already wasted attempting to "solve a problem". Available with a head made of steel, plastic, brass or hard rubber. As a side note, only the steel head has a practical use, no logical use for the other materials has ever been discovered. Some models equipped with the fly away head option. AKA "Ford Wrench", "BFH", "Wound Inflicting Hammer"
:lolu: :lolu:

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • noirrac1j
      Rolex 2235 escape wheel jewel setting replacement

      By noirrac1j · Posted

      Hell0 @nevenbekriev. Thank you for your advice. I have removed the old setting using my staking set--I will keep the KIF spring, since it is still good.  I am awaiting the replacement setting, and will update when I do that. In the mean time, I looked at the escape wheel and it looks ok. What do you think?    
    • Hawaiikook808
      Seitz Tool - Help determine if Seitz or not

      By Hawaiikook808 · Posted

      Aloha All, I recently bought this Seitz tool on eBay, but it is missing some pushers reamers.  I ended up ordering new parts for those that were missing before I received the actual Seitz tool (bad idea).   Upon inspecting the pushers/bits, I noticed 23 of the 56 provided with the set had no numbers. Further inspection revealed a huge difference in the quality of those unnumbered.  Do all Seitz pushers/bits have a number on them?  I'm pretty sure that 33 of the 56 I received are cheap Chinese knockoffs.  The worst part is that I ordered $80 of parts to replace the missing pushers/bits, and now I'm looking to return the tool. I'm not crazy, right? If these are Seitz parts, they should all be numbered, correct? The first two pictures are the Seitz (numbered), and the other pictures are the suspect parts.  Will I even be able to get a refund?  Thanks, Frank     
    • luiazazrambo
      WWW Eterna sucked me in.

      By luiazazrambo · Posted

      It was £10 + min fee, total £16, could not leave it there. Its a Stanton A.D.2. http://stanton-instruments.co.uk/
    • Geotex
      Generic screws for unknown movements

      By Geotex · Posted

      Chief- The picture below shows the three parts from the dial side that are most useful to "fingerprint" a movement in conjunction with the diameter of the movement.  That's why forum participants are always asking for dial side photos in posts asking for identification.  As far as the setting lever screw, it actually sits loose in the main plate. The threads engage the setting lever below, and the elongated stem above the shoulder sticks through a hole in one of the bridge plates so that it's held captive if unscrewed all the way.  So you may be fine as far as that goes. 
    • Chief
      Generic screws for unknown movements

      By Chief · Posted

      So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
×
×
  • Create New...