Jump to content

New To Wrt

ausimax

By ausimax
in Introduce Yourself Here

 Share

Recommended Posts

ausimax WRT Addict

ausimax

Posted
Posted

Hi,

 

My name is Max and I have just joined WRT have been a member of several watch forums and have only recently found WRT, I have been repairing/restoring watches primarily Seiko's for about a year, I buy non working watches and hopefully get them going again, i am not a collector as such however I seem to have acquired  quite a few as a result of my efforts, mainly fairly common stuff not too much of value.

 

My primary mechanical field before I retired many years ago was heavy earthmoving equipment, I took up watches to have a good inside hobby during the heat of the long Aussie summers, a lot of fun but can get expensive once you decide you need all those special tools.

 

This looks like a good place to be, particularly as it seems to be principally concerned with watch repairing, not collecting and boasting about your latest mega bucks purchase, I can't afford really collectible watches and no it is not sour grapes I just do it for fun not fortune.

 

I hope you enjoy my company as much as I hope to enjoy yours!

 

Max

  • Like 1
Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

Welcome to the forum Max, and thank you for the informative introduction. It's strange to hear someone having the hobby for something to do when it's too hot outside. Living in Scotland, most of my work is done when it is too wet and cold! I look forward to reading about your horological exploits.

Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Welcome Max,

 

That's perfectly fine about your watch collection and the hobby in general. I'll be looking forward to pictures and work in general regarding watchmaking.

 

As you will soon find, it is not about the money but about the accomplishment and learning! And we all pool together so our different and very personal watchmaking goals can be achieved. So, enjoy the ride and welcome to the forum!

 

Cheers,

 

Bob

Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

Hello Max and welcome,

I keep buying cheap watches out of curiosity and it can be quite entertaining but always a gamble. The latest is a "Continental" bought as I could not find out much about the brand and I was hoping for a half decent movement. It is Swiss but so far down the lower end to be subterranean. It boasts a single Jewel. However it is a day/ date watch and it is working and the dial is clean, the perspex is scratched beyond polishing and will need replacing so it will be fun to clean it up and see what it looks like. It goes into my increasing queue.

I look forward to your postings.

Cheers,

Vic

Link to comment
Share on other sites
ausimax WRT Addict

ausimax

Posted
  • Author
Posted

Welcome to the forum Max, and thank you for the informative introduction. It's strange to hear someone having the hobby for something to do when it's too hot outside. Living in Scotland, most of my work is done when it is too wet and cold! I look forward to reading about your horological exploits.

Thanks Geo, sometimes I envy you the rain and greenery of the UK, but then again I don't, three wet days in a row and we start to go stir crazy. I get most of the outdoor work done during winter except the summer jobs like mowing the lawn, all 5 acres of it.

 

Max

Link to comment
Share on other sites
ausimax WRT Addict

ausimax

Posted
  • Author
Posted

Welcome Max,

 

That's perfectly fine about your watch collection and the hobby in general. I'll be looking forward to pictures and work in general regarding watchmaking.

 

As you will soon find, it is not about the money but about the accomplishment and learning! And we all pool together so our different and very personal watchmaking goals can be achieved. So, enjoy the ride and welcome to the forum!

 

Cheers,

 

Bob

 

Thanks Bob, for me it's all about bringing old watches back to life and out of the dump, none of them are anything special but I enjoy the challenge.

 

Max

  • Like 1
Link to comment
Share on other sites
ausimax WRT Addict

ausimax

Posted
  • Author
Posted

Hello Max and welcome,

I keep buying cheap watches out of curiosity and it can be quite entertaining but always a gamble. The latest is a "Continental" bought as I could not find out much about the brand and I was hoping for a half decent movement. It is Swiss but so far down the lower end to be subterranean. It boasts a single Jewel. However it is a day/ date watch and it is working and the dial is clean, the perspex is scratched beyond polishing and will need replacing so it will be fun to clean it up and see what it looks like. It goes into my increasing queue.

I look forward to your postings.

Cheers,

Vic

 

Hi Vic, I know what you mean i have a couple like that with genuine Swiss  Baumgartner 866 CLD I jewel movements, one was in a Citron World Time and the other was in a Mandarin with a Triad Watch Co branded movement, it is amazing how well some of these cheap and nasty movements run and last.

 

Max

Link to comment
Share on other sites
ausimax WRT Addict

ausimax

Posted
  • Author
Posted

hello max....we've been waiting for you.

guys, max sold me a beautiful citizen newmaster from another forum. it is a beauty.

i say we vote him in. LOL

 

Thanks Tim, glad the newmaster is still pleasing you, I am still tending to stick with Seiko's as they are easy to find donors for, though I have to confess I have just bought a Citizen Diver, still waiting it's arrival,

 

Max

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • noirrac1j
      Rolex 2235 escape wheel jewel setting replacement

      By noirrac1j · Posted

      Hell0 @nevenbekriev. Thank you for your advice. I have removed the old setting using my staking set--I will keep the KIF spring, since it is still good.  I am awaiting the replacement setting, and will update when I do that. In the mean time, I looked at the escape wheel and it looks ok. What do you think?    
    • Hawaiikook808
      Seitz Tool - Help determine if Seitz or not

      By Hawaiikook808 · Posted

      Aloha All, I recently bought this Seitz tool on eBay, but it is missing some pushers reamers.  I ended up ordering new parts for those that were missing before I received the actual Seitz tool (bad idea).   Upon inspecting the pushers/bits, I noticed 23 of the 56 provided with the set had no numbers. Further inspection revealed a huge difference in the quality of those unnumbered.  Do all Seitz pushers/bits have a number on them?  I'm pretty sure that 33 of the 56 I received are cheap Chinese knockoffs.  The worst part is that I ordered $80 of parts to replace the missing pushers/bits, and now I'm looking to return the tool. I'm not crazy, right? If these are Seitz parts, they should all be numbered, correct? The first two pictures are the Seitz (numbered), and the other pictures are the suspect parts.  Will I even be able to get a refund?  Thanks, Frank     
    • luiazazrambo
      WWW Eterna sucked me in.

      By luiazazrambo · Posted

      It was £10 + min fee, total £16, could not leave it there. Its a Stanton A.D.2. http://stanton-instruments.co.uk/
    • Geotex
      Generic screws for unknown movements

      By Geotex · Posted

      Chief- The picture below shows the three parts from the dial side that are most useful to "fingerprint" a movement in conjunction with the diameter of the movement.  That's why forum participants are always asking for dial side photos in posts asking for identification.  As far as the setting lever screw, it actually sits loose in the main plate. The threads engage the setting lever below, and the elongated stem above the shoulder sticks through a hole in one of the bridge plates so that it's held captive if unscrewed all the way.  So you may be fine as far as that goes. 
    • Chief
      Generic screws for unknown movements

      By Chief · Posted

      So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
×
×
  • Create New...