Jump to content

Clifford Norman Bowler, Watchmaker


Recommended Posts

Shot for Channel 4 in 1991, The Watchmaker, is a 10 minute documentary which glances at the life of Clifford Norman Bowler (1899-1993) a long-standing English watchmaker and definitely someone many of us would have liked to meet.

 

post-1450-0-99328100-1448830147_thumb.jp

 

Mr. Bowler belonged to the precise profession for over 70 years until his death at 93. Initially working for others in Manchester after he left the army, he set up his own repair shop at 54 Mill Lane, West Hamsptead, which he acquired for 100 pounds and run for over 67 years. Today there is a plate commemorating him at the entrance of his former premises.

 
post-1450-0-87196900-1448823211_thumb.jp
 
In the film he can be seen at his work bench smoking a pipe or inspecting watches with an eye loupe and at the counter taking several orders from customers (cleaning a pocket watch, changing a strap or a pin). He recounts for the camera his beginnings and how he moved to London, as well as remembering relatives. When asked about the secret of his longevity, he confesses this to owe to a contented mind, regular habits and a peaceful life.

 

Sadly he did not leave any followers: 'All the knowledge that I have obtained and learned during over sixty years that I have been here, it all comes to nothing. I can't pass my knowledge on which I'd like to'.

 

His shop, still vacant more than a decade later after his disappearance, symbolises the emptiness left by an irreplaceable man.

 

There is more info about him in this article: http://westhampsteadlife.com/2014/01/15/a-moment-in-time-on-mill-lane/9921

 

If you ever met this man or heard about him, your comments could help to honour his memory.

  • Like 3
Link to comment
Share on other sites

Shot for Channel 4 in 1991, The Watchmaker, is a 10 minute documentary which glances at the life of Clifford Norman Bowler (1899-1993) a long-standing English watchmaker and definitely someone many of us would have liked to meet.

 

attachicon.gifClifford Bowler.jpg

 

Mr. Bowler belonged to the precise profession for over 70 years until his death at 93. Initially working for others in Manchester after he left the army, he set up his own repair shop at 54 Mill Lane, West Hamsptead, which he acquired for 100 pounds and run for over 67 years. Today there is a plate commemorating him at the entrance of his former premises.

 

attachicon.gifmill_lane_watchmaker_plaque.jpg

 

In the film he can be seen at his work bench smoking a pipe or inspecting watches with an eye loupe and at the counter taking several orders from customers (cleaning a pocket watch, changing a strap or a pin). He recounts for the camera his beginnings and how he moved to London, as well as remembering relatives. When asked about the secret of his longevity, he confesses this to owe to a contented mind, regular habits and a peaceful life.

 

Sadly he did not leave any followers: 'All the knowledge that I have obtained and learned during over sixty years that I have been here, it all comes to nothing. I can't pass my knowledge on which I'd like to'.

 

His shop, still vacant more than a decade later after his disappearance, symbolises the emptiness left by an irreplaceable man.

 

There is more info about him in this article: http://westhampsteadlife.com/2014/01/15/a-moment-in-time-on-mill-lane/9921

 

If you ever met this man or heard about him, your comments could help to honour his memory.

Great vid. He must have accumulated a vast amount of knowledge with 60 years of watch/clock repair. Working with no finger cots & smoking  a pipe while he worked amazing.

Link to comment
Share on other sites

Great post Edmund, and loved the video. Brings back memories of an almost identical shop when I was a kid in Ireland. Bit sad when he talked about the loss of knowledge. Really makes you appreciate what Mark does in his videos, as this is my only form of any training, the rest is trial and error.

Link to comment
Share on other sites

  • 4 years later...
  • 2 years later...
On 11/29/2015 at 9:10 PM, Edmund said:

Shot for Channel 4 in 1991, The Watchmaker, is a 10 minute documentary which glances at the life of Clifford Norman Bowler (1899-1993) a long-standing English watchmaker and definitely someone many of us would have liked to meet.

 

post-1450-0-99328100-1448830147_thumb.jp

 

Mr. Bowler belonged to the precise profession for over 70 years until his death at 93. Initially working for others in Manchester after he left the army, he set up his own repair shop at 54 Mill Lane, West Hamsptead, which he acquired for 100 pounds and run for over 67 years. Today there is a plate commemorating him at the entrance of his former premises.

 
post-1450-0-87196900-1448823211_thumb.jp
 
In the film he can be seen at his work bench smoking a pipe or inspecting watches with an eye loupe and at the counter taking several orders from customers (cleaning a pocket watch, changing a strap or a pin). He recounts for the camera his beginnings and how he moved to London, as well as remembering relatives. When asked about the secret of his longevity, he confesses this to owe to a contented mind, regular habits and a peaceful life.

 

Sadly he did not leave any followers: 'All the knowledge that I have obtained and learned during over sixty years that I have been here, it all comes to nothing. I can't pass my knowledge on which I'd like to'.

 

His shop, still vacant more than a decade later after his disappearance, symbolises the emptiness left by an irreplaceable man.

 

There is more info about him in this article: http://westhampsteadlife.com/2014/01/15/a-moment-in-time-on-mill-lane/9921

 

If you ever met this man or heard about him, your comments could help to honour his memory.

My girlfriend just bought this properly! We are currently ripping out the interior to refurbish it but the plaque in the picture above is staying. 🤓

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yes, I was referring to the (jewelled) gear train with HP (most of the time, I use 1300, but when Rolex says 1000, I'll use 1000).
    • did I miss the update of the message of something changing?      
    • I suppose it would depend upon what your lubricating with those? for instance what does the manufacturer say about those lubricants? I have a PDF from the manufacture and a rather peculiar statement found on the bottom of the chart. my suspicion is the reason the recommending would be without epilam the HP oils like the spread except when they're in Ruby jewel's with steel pivots. tableEN lubrication 2020.pdf
    • These types of hairsprings become weak with age and very fragile. Which I expect it is that giving you trouble, and that wheel is not the correct one, if it were not bent I don't think the movement would run as the teeth are not the correct height. The problem you have is price which depends on you. It can be repaired but is it worth it to you, because there is little value in the clock. A wheel can be made and hairspring replaced. Or hang on to it and keep looking on ebay which is your best bet for replacement parts or even a complete movement but it will be like finding a needle in a haystack. 
    • I did that also for a few movements - well, mainly in/around the train jewels. I made big efforts to epilame the mainplate WITHOUT getting Epilame into the Pallet fork jewels (where it's not supposed to be, right?). I made litte barriers with Rodico around that jewel and used drops from a syringe to apply on the rest.  However, I've now stopped doing this. For three reasons: 1. It's a hassle and consumes more of this liquid gold. 2. I didn't see the need when using HP1000/HP1300 lubricants and grease for most part. The two places where I'd use 9010 (i.e. escape wheel and balance) receive Epilame in specific places... or the cap-jewel-setting of the balance suspends the oil sufficiently be capillary action (see my "conflict" about using Epilame on the balance jewels).  3. Lastly, and here I really wonder about yours and others' experiences: I felt that applying Epliame to the train jewels left them looking hazy (borderline dirty) compared to the (painstakingly achieved) sparkly clean results of my cleaning process. I just can't help but think that the Epilame residuals would mix with the oil and cause more friction/wear. I don't know.    simple: it'll stay there. It won't move any further. That's exactly what is happening if you epilame a cap stone. You end up placing the 9010 right on top of the epilame and the oil will sit nicely on that spot.
×
×
  • Create New...