Hello I am Martin.

[Martin89]

I found this forum when searching for answers about watchmaking. recently started working on an under budget cleaning machine thanks to the guys here sharing their ideas. 

Admirer of horology and engraving.

Looking forward becoming friends with this community.  

 

[oldhippy]

Thank you for your introduction and welcome to this friendly forum.

We all look forward to your contributions and continued involvement. 

If there is anything we can help you with don’t be afraid to ask. Nice clear photos can help a lot.

[Nucejoe]

Welcome to the WRT  forum.

[RichardHarris123]

Hello and welcome from Leeds, England. 

[watchweasol]

Hi Martin and welcome to the forum,  would like to see some pics of the cleaning machine so far, As you will have found on the site there are many designs of the DIY machines.

[Martin89]

4 hours ago, watchweasol said:

Hi Martin and welcome to the forum,  would like to see some pics of the cleaning machine so far, As you will have found on the site there are many designs of the DIY machines.

This is the one I made. I am still tryi.g to figure out how to add the drying station. I shorten the shaft to minimize the wobble in high speeds and on the jar cover I used a ball bearing which helps with the wobble. 3d printed the cover and jar holders. Jars and baskets bought in ebay. Any suggestions are welcomed. 

[watchweasol]

Hi Martin. Looks very professional,  what’s the motor assy from.     A drying station can be somthing as simple as a bulb order a screen  or as complex as an element in a ceramic base.

[Martin89]

3 hours ago, watchweasol said:

Hi Martin. Looks very professional,  what’s the motor assy from.     A drying station can be somthing as simple as a bulb order a screen  or as complex as an element in a ceramic base.

Thank you, the mixer i got it thru amazon, not an expensive brand. For the drying station i was trying to get something with a fan. I was trying a 12v ptc heater and a 12v dc power adapter, but the conector was overheating.