Jump to content

Bench Top Micrometer Recommendations Please

SSTEEL

By SSTEEL
in Watch Repairs Help & Advice

 Share

Recommended Posts

SSTEEL Distinguished Member

SSTEEL

Posted
Posted

I am slowly building my more specific tools, and equipment these days, with a mini lathe in the none to distant future too, but for now, having just bagged a great jeweling set thanks to Geo, i am on the look out for a dialled bench top micrometer.  Can any of you guys recommend one to me?

 

I found this one, is this any good, and is the price ok?  £210GBP Shipped.

 

Is the age something to consider with regards calibration of the tool, do I need to get it recalibrate?  Sorry for the dumb questions.

 

http://www.ebay.co.uk/itm/JKA-Feintaster-high-precision-bench-micrometer-for-watchmakers-/201438939532?hash=item2ee6b2498c

 

21836655985_6f47dc5fa9_z.jpgJKA Micrometer by Micky Aldridge, on Flickr

Link to comment
Share on other sites
chadders1966 WRT Addict

chadders1966

Posted
Posted

Hi Micky

This is strictly my personal view, I am a long way from an expert. I have one and I like it, but I still use my screw type bench micrometer for accuracy. I just feel it's more reliable, partly because it is more simple - you are simply counting turns as opposed to the feintaster where you have a dial and pointer translating the measurement. I certainly wouldn't put anyone off buying one of these though as they are great tools.

With regard to price they are expensive so you need to watch and wait I think. I noticed one on EBay.de (the best place to look) this week for a BIN price of €100. Most seem to be priced high, but you can get bargains.

Stephen

  • Like 1
Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

For others that may be interested. I have micrometers and verniers, but the Feintaster is by far the best piece of kit when measuring watch components. I purchased one a couple of years ago and wouldn't be without it now!

Link to comment
Share on other sites
  • 2 weeks later...
Geo Distinguished Member

Geo

Posted
Posted

You certainly did! :)

Even though it reads to 0.01mm, it is easy to estimate sizes smaller than that. The pallet fork pinions on the 1120 movement I have just rebuilt measured 0.068mm and 0.0067mm respectively. I was frightened to measure the diameter of the new ones, as the slightest tweak of the tweezers would have snapped them. I'm still curious as to what the new size is. If anyone has information on this please let me know.

  • Like 1
Link to comment
Share on other sites
Alaskamick WRT Addict

Alaskamick

Posted
Posted (edited)

I read with great interest about the quality and usefulness of the JKA Feintaster and started to look for one. Unfortunately they all seem to be from £145 to £195 which is a bit too rich for me.

 

Then I came across this item on fleabay and couldn't believe my luck.

 

Item no.252109127293 is the one I purchased but there are others on the site.

 

It came in a small plastic box, will stand alone or can be used hand held. I can honestly say that it is like new and life would have been a lot easier if we'd had these available for use when I was in Engineering.

 

It's about 8cm sq, and 10cm thick. Operates as smooth as silk.


 
 
Edited by Alaskamick
Link to comment
Share on other sites
Alaskamick WRT Addict

Alaskamick

Posted
Posted (edited)

Geo the anvils seem to be the same as the Feintaster.

 

Really the only difference is that, if bench mounted this one works vertically, but with the advantage that you can hold it easily and use it as a hand held mic.

Edited by Alaskamick
Link to comment
Share on other sites
chadders1966 WRT Addict

chadders1966

Posted
Posted

I think the item you bought is called a thickness gauge. It's a good tool, but as Geo said one of the best parts of the feintaster are the soft closing anvils. You can allow them to close on very small and delicate items without causing damage, thus giving very accurate measurements. I wouldn't risk doing the same with either a thickness gauge or micrometer in case of damage.

As I said before I prefer overall the accuracy of a micrometer, but the feintaster is the best for this I think. They are expensive, but if you keep an eye out you can pick them up for a slightly less wallet straining amount. I saw one listed as BIN for €65 last week, about £50 I think? They also often sell for about €100 on German EBay.

Stephen

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

Clockboy

Before I bought a bench micrometer I used one of these - http://www.ebay.co.uk/itm/Cast-Iron-Micrometer-Stand-for-Micrometers-up-to-100mm-4-/111402215939?hash=item19f016ea03:m:mG92BQeSe7n3q42ZFZBoBcA.

I found it very useful as it is quite solid and keeps the micrometer steady at whatever angle you want.

Stephen

Thanks Chadders I have looked at these but my clamp system works. However a Feintaster is on my future purchase list when funds allow.

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Black coating on shock jewel metal housing

      By Neverenoughwatches · Posted

      I use elma ammoniated H , the jar remains open for around five minutes while i set the basket up clean and spin off the cleaner. The smell doesn't bother me at all, i do this in a 10 by 8  foot room, but i think I'm immune to most environments 🤷‍♂️. I could open a window or a door i guess but watch repair under the influence of toxic fume inhalation adds to the overall experience. ( just joking peeps dont try this at home ).
    • Simeon
      Bezel replacement difficulty

      By Simeon · Posted

      The bezel feels slightly loose over the case. There wasn't a gasket but could the crystal be expanded over the lip in the caseback and then the bezel pressed over the crystal?  Actually this sounds like a possibility. This is a great forum. https://www.watchrepairtalk.com/topic/20587-old-orient-case/?do=findComment&comment=173918
    • rjenkinsgb
      Black coating on shock jewel metal housing

      By rjenkinsgb · Posted

      The cleaner smells of ammonia, but it's not too bad; just keep it covered as far as practical.  I use an ultrasonic machine on a kitchen worktop. The rinse does not smell strongly, it's vaguely like paraffin. I did check the safety data sheets before buying it & it's said to be safe in normal use. My dedicated watch cleaning machine is still a work-in-progress; four position linear, based on 1L kilner jars for station spacing, to have a heated dryer in position 4. It uses standard, readily available parts as far as possible to make it easy to reproduce, plus 3D printed bits for the custom parts. (The horizontal drive motor is out at the moment while working on the stepper drive software)    
    • Albyon
      Citizen Pilot Radio Controlled hour's hand clearance

      By Albyon · Posted

      I disassembled the hands of my Citizen Pilot Super Titanium Radio Controlled AS2031-57E a couple of times.  The second time because on the first attempt i evidently did not push the hour hand well and in practice it was not well fixed and moved receiving even small bumps. After the second attempt everything seems to be ok.  Except that i have the impression that giving a little more sustained blows on the wrist, the hour hand still has a slight movement, in the order of half a second or less. It is a normal, topical and usual thing about this movement, which, i remind you, is exclusively electronically managed, each hand independently, a clearance in the movement that it has of its nature, or it may depend on the hand is not yet well attached to the pin and should perhaps be replaced because the hole has slightly enlarged?
    • Neverenoughwatches
      Balance staff sourcing?

      By Neverenoughwatches · Posted

      This is something a lot of beginners and amateurs struggle with Nev, being able to remove the staff without distorting the hole of a non steel balance wheel. Having the right tools to do this safely  and effectively is not easy. Even with something useful it takes a lot of practice, i spent two days not so long ago practicing cutting away the balance wheel hub of a staff using a 25mm diamond wheel.  I didnt manage to do it once without catching the underside of the wheel.
×
×
  • Create New...