Jump to content

Gold Leaf


Nige

Recommended Posts

Finally got round to putting gold leaf on my long case clock dial which I restored a while ago,the pictures had been over painted by Mrs Mop and looked terrible,I managed to remove it and there was enough of the original left for me to redo it,all the numerals and minute rings etc were gone but usering UV light was able to see them all very clear as old inks were charcoal based and they Flores, the case is good and now just waiting on the movement which my brother is going to do,but as you can guess family comes after paying customers.The clock is about 1785/90 and is a nice example of a Cornish long case.

post-849-0-14608500-1440710412_thumb.jpg

post-849-0-58812600-1440710433_thumb.jpg

post-849-0-45124600-1440710454_thumb.jpg

post-849-0-08109000-1440710473_thumb.jpg

  • Like 2
Link to comment
Share on other sites

Thanks oldhippy,the movement is at my brother's workshop at the moment awaiting repair,it did run when i bought the clock but it had been very badly bushed in the past and to repair this he is going to remove the brass around the bushes and insert 19th century brass and then rebush it.I've not been able to find out who the dial maker is although it does have Wilson look but gesso style is not the same,possibly Osborne,but I would think it was one of the Birmingham dial makers.

Link to comment
Share on other sites

Thanks oldhippy,the movement is at my brother's workshop at the moment awaiting repair,it did run when i bought the clock but it had been very badly bushed in the past and to repair this he is going to remove the brass around the bushes and insert 19th century brass and then rebush it.I've not been able to find out who the dial maker is although it does have Wilson look but gesso style is not the same,possibly Osborne,but I would think it was one of the Birmingham dial makers.

That is the correct way of re-bushing antique clocks matching the brass to its colour, also the brass is so much harder. However many years ago there might not have been a clock maker/repairer about and people went to the local blacksmith and he would do the repairs, that's why on many old clocks you see punch marks in order to close the holes. Clock makers would buy in dials and you are right to expect it to come from around Birmingham, the same with the false plates, that is the plate between the dial and the movement. That sometimes has a name on it, but it is not the dials maker. One other thing with the gold leaf, I expect the arch for the calendar would also have gold leaf. 

Link to comment
Share on other sites

I thought the same about the date arch but now I'm not so sure,it is done in a dark blue paint or ink but to a very fine standard and I have seen a couple of other cornish clocks the same, I think if someone just repainted it it wouldn't be done so well,

Link to comment
Share on other sites

I have taken the date wheel off before and there is no sign of gold,only the white paint over spill,see other pic at bottom. I have included some pictures,also of the case,post-849-0-44292700-1440931675_thumb.jpgAs you can see no sign of gold.post-849-0-65917500-1440931784_thumb.jpg the case is in lovely condition and still has its original ebony finish,which is really nice as so many have been stripped.i am also doing an interesting dial for my brother,he only has the dial and got it with some clock parts,post-849-0-03837900-1440932146_thumb.jpg the moon dial is small at only 4.5 inches and the aperture at the top is large for dial of 10.5inches which sadly is missing,so we have no idea what it was.the moon dial was very black and hard to see but after cleaning was found to be very beautifully done, I had to repaint some of the ship,the house and both moons where they were chipped off to the brass,post-849-0-73156600-1440932900_thumb.jpgHere's the back of the dial where you can see the size of the top dial.post-849-0-15163700-1440933013_thumb.jpg I've not done much on the main clock dial yet only pencilled in the numerals and name.post-849-0-38289100-1440931640_thumb.jpg close up with date removed.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I am pretty sure the correct practice to insert a tensioned crystal is to use a crystal press - although I always hate doing it as one slip and the crystal can skid across your dial, this happened to me on a Tissot, mangled all the hands and scratched the dial down to bare metal. I much prefer to remove the bezel and install the crystal into the bezel and then the bezel back onto the watch, not sure if this is an option for you?
    • Well, Geiger counter showed up today and the dial and/or hands were extremely radioactive, reading quickly spiked from a baseline of 10-20 cpm to 100 and was still rising when I removed it. Trashed the whole thing. Thankfully nothing else outside the components was registering - work surface, tools, the paper I had used to clean off some components....    And now I have a Geiger counter to use to  check practice watches BEFORE disassembly
    • Usually the coiled spring contacts the piezo sounder and the finger spring is the ground.
    • So I checked with my friendly local lab supplier and they can supply the following in 2.5 lt bottles: Tetrachloroethylene (B-Dip) - approx £65 Trichloroethylene (one-dip) - approx £43 n-Heptane 99% (Essence of Renata) - approx £35 Hexane - approx £45 I can't import or buy locally the 'real' products, hence the raw chemicals above. What do you think would be my best option? I'm edging towards Trichloroethylene - I know there are greater health risks, but given the very small quantities used for each treatment and 99.99% of the time it will be sealed in a jar, I think any risk is vanishingly small? This is mainly due to its assumed superior cleaning properties, or from the experience of this group, is the extra cleaning noticeable compared to its safer alternatives?
    • Unfortunately after much investigation, apparently the coil has been discontinued! Shall I get my service guy to try the solder or the conductive paint? 🎨 Final recommendation please🙏
×
×
  • Create New...