Jump to content

Shoreham Air Display - Plane Crashed On To The A27 Dual Carriageway

WillFly
 Share

Recommended Posts

WillFly Distinguished Member

WillFly

Posted
Posted

I sometimes go to the annual RAF Air Show at Shoreham Airport, near where I live. Not this year, luckily, for me, as a Hunter jet didn't pull out a loop-the-loop manoeuvre and crashed on to the main A27 dual carriageway - killing 7 people.

What a terrible disaster. People forget that air shows have a comparatively high incidence of accidents - not surprising considering the variety of planes and pilots involved. I've seen two fatal crashes myself over the last few years.

Air crash

Link to comment
Share on other sites
Ishima Super WRT Addict

Ishima

Posted
Posted (edited)

As a slight aircraft enthusiast this made me quite sad, I love that airshows are a thing and we have this opportunity to enjoy aircraft on this level  but it simply isn't worth a single person's life, let alone 7. Still waiting and hoping on some news about what caused the crash, but i suppose that might wait until the official investigation is concluded, which could take a very long time.

Edited by Ishima
Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

I was absolutely shocked and saddened to here about this horrendous crash this morning when I arrived at Scone Aerodrome this morning to sit an exam. Last night I didn't have the telly on, so knew nothing about it. Not the sort of thing you want to hear anytime, but especially when I'm in the process of renewing a pilots licence!

My heart goes out to all affected by this incident.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • nevenbekriev
      Winding pinion making

      By nevenbekriev · Posted

      This is a flying cutter, usual one. The cutter itself is shown in the pictures in the first message, it is made of broken tungsten carbide drill bit. I asure that all the angles of the cutter are as they should be. I have video - little older one - that I made when onse making the same kind of winding pinion for a Poljot 2200, which is even smaller than this one. It is not easy to see in the video, but the tool rest moves about 1mm towards the object in Y direction and then returns back untill cutter is rotating. Then the spindle is rotated one tooth ahead and everything repeated untill all teeth are cut.
    • Trav2004
      Help Identifying movement

      By Trav2004 · Posted

      After a bit further research could it possibly be an AS 970?
    • Bonefixer
      FHF70 balance jewels settings

      By Bonefixer · Posted

      Latest project was a non-running ebay purchase with an FHF70 movement. I stripped and cleaned it, reassembled it, and got it running. So far so good, nothing damaged AFAIK.  I was oiling the top jewel on the balance (the one in the cock) which was a slightly unusual shock setting. I removed the spring (3 leaves) which was part of a chaton holding the cap jewel. This left the hole jewel behind which I retrieved with rodico and then lost it. I was taking it off the rodico, very gently as I thought, with tweezers, and then it just disappeared.  Fast forward a week, I got a donor movement, non-running, with the plan to just take the shock jewel that I’d lost. It was the same movement but had standard incabloc settings, and was steel rather than copper/brass.  I changed the cock and balance complete and it ran, not very well. I switched the lower jewel setting, cleaned and oiled both jewels and the replacement balance. Without the pallet fork the balance swings very nicely with a puff of air. With the fork in place, balance out, it flicks side to side nicely with power in the mainspring.  Put them together and it doesn’t run. The impulse jewel sits in the fork and it stops.      Any suggestions how I proceed? In case you didn’t follow that I have 2 FHF70 movements, nothing broken as far as I can tell, but mixing up the balance wheels and jewel settings results in a non runner. 
    • Neverenoughwatches
      Part swapper to part maker

      By Neverenoughwatches · Posted

      Oh and this almost perfect third wheel pivot and slightly set mainspring  Ah ok yes i see what you mean, good idea. I'll try that if i fluff this one up. The image isn't great quality but i like the idea though.
    • RichardHarris123
      Part swapper to part maker

      By RichardHarris123 · Posted

      Why cut the paper, cut a square around the image and grind to it. 
×
×
  • Create New...