Jump to content

200 year old Chronometer clock pendulum


KSB

Recommended Posts

This clock is a John Stokell, NY made in 1832. The pendulum is a lead crystal container with mercury in it. The mercury comes out the top even though it looks sealed. What are my options? Can I get it resealed? And who does that? I am in the Dallas/Fort Worth TX area. Thanks!

Link to comment
Share on other sites

  • 2 weeks later...
On 9/23/2023 at 4:15 AM, KSB said:

This clock is a John Stokell, NY made in 1832. The pendulum is a lead crystal container with mercury in it. The mercury comes out the top even though it looks sealed. What are my options? Can I get it resealed? And who does that? I am in the Dallas/Fort Worth TX area. Thanks!

As a retired dentist, I'm very familiar with mercury.

Can you actually see droplets of mercury around the pendulum? If you can, sprinkle sulphur powder over it, open all doors and windows and let it stand overnight.  Then use a small brush and carefully clean up the area. 

Mercury is toxic. Just one small droplet is enough to saturate the air in an enclosed room. I moved away from using dental mercury in my practice more than twenty years ago. But there are some situations where amalgam is the only material suitable for the restoration. Hence I had to keep a small supply of it. I used to store my mercury in Tupperware containers in a drawer at my clinic. And after some time, the edges of the drawer would develop a strange grey stain. It can be cleaned off with some effort but it kept coming back. I suspect the stain is caused by mercury vapors.

A study showed that dental staff have a higher level of mercury in hair and nail samples when compared with the general public.

A friend of mine sent me an amalgam mixing machine (amalgamator) for repair many years back. When I opened up the machine, there was a puddle of mercury inside. I quickly closed it back and disposed of the machine. I quickly informed my friend and she went for a hair and nail sample test for mercury. It was found that she had seven times the safe limit of mercury in her body!

But the good news is; she's still alive and appears fine. 🤣

Recently, a nice crystal regulator clock came up for auction on eBay. I was really tempted but after much deliberation, I decided I wasn't going to have mercury in my house.

I've heard of people converting their mercury pendulums to gallium, which is safer. Or maybe we just don't know enough about gallium toxicity. 🤪

Gallium looks a lot like mercury, except it's solid at room temperature. It has a melting point of about 30°C. A piece of gallium would melt and look like mercury if held in the palms of your hand. And now with global warming, where temperatures above 30°C are getting common, gallium looks like a real viable replacement for the mercury in crystal regulators.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Have you got the pallet fork installed in the movement when you see the train move when using the setting works? As nevenbekriev said, without the pallet fork to lock the train, the behaviour you are describing is normal. If this is happening with the pallet fork installed, you have a problem in the gear train, it should be immobile when the pallet fork is locking the escape wheel.  The fit of the circlip above the pinions on that wheel is crooked in your pictures, it should sit flat up against the upper pinion as in Marc’s picture.  Hope that helps, Mark
    • Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued. They except to get stem in stock for cal. K916 but will that work? Or Is there a way out to join the ends?
    • The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
×
×
  • Create New...