Jump to content

2824-2 Clean Up.


Recommended Posts

Hi guys.

Received my Tissot that I'm using as a learning tool with the above movement in it.

Looks like some water damage. One of the movement holder screws is welded in. The movement works if shaken but it won't wind via the stem.

So Sunday is the day. Sit down and take my time :) tea and biccies.

James.

Sent from my HTC One using Tapatalk

Link to comment
Share on other sites

Had a little time this evening.

1st part off. Looks ok not rusty and free.

1 problem is the stem release is stuck down so I can't line up the hands and can't safely discharge the main spring. Will have to wait till it stops manually. 09d3fafa31082161133f1affd19beaf0.jpg9fb7a40cca8a098de2e5836c79f47d8f.jpg

Sent from my HTC One using Tapatalk

Link to comment
Share on other sites

Looks like the movement needs some TLC . Can't you hold the mainspring with a little larger screwdriver on the barrel arbor screw?  And gently tighten it and release the click spring? And then slowly discharge  the mainspring .

Edited by rogart63
Link to comment
Share on other sites

Looks like the movement needs some TLC . Can't you hold the mainspring with a little larger screwdriver on the barrel arbor screw? And gently tighten it and release the click spring? And then slowly discharge the mainspring .

Yep didn't think of that :)

Sent from my HTC One using Tapatalk

Link to comment
Share on other sites

As you can see the movement holder screw is welded in, i have tried to lubricate it and even applied some heat but i just cant get it to budge.

The date wheel will be cleaned and re used but the dial is passed it , i noticed cousins have some Tissot dials, i also need a stem and crown, see dial below.

If someone knows what parts i need it would help me out massively.

so far not to bad for my 1st full strip and rebuild :)

James.

bf75e3907a24024e36d473268675f3c4.jpg

Edited by Gingerr6
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello WRT members I started a project 4years ago printing straps for seiko model 5M42-0E69. This because the strap wasn’t produced anymore and i needed a strap for my father’s watch that come to my possession. I found someone who was willing to make a computer drawing and than he started printing and worked out well. To build up the metal caps you need to have some patience but it worked.  He fiets printed a prototype in red. 
    • Hello a nd welcome ro the forum.      Enjoy.
    • I went with GBP as you guys started it off and $4.04 adjusted for inflation.
    • Great help for me - thank you all. If the hairspring has been shortened, it must have have even tighter coils than it does now and they all look utterly concentric but nevertheless I'm not leaning further towards that explanation. For me, vibrating a new hairspring would be far from easy - I wouldn't know where to start.And if a new contrate wheel has been cut and mounted, it's been done very skilfully, leaving no obvious telltale signs. Cutting and crossing out contrate wheels takes skill, too, so a bit of a last resort. and why would the he have cut 70 teeth if the existing one had 75. The platform certainly looks original to the clock but I cannot rule out the possibility that it has been taken from a similar period one (with a different tooth count). It was produced by Soldano (who supplied Dent) and the movement is by Hollingue Freres (who worked for Drocourt) so it's a nice small one (not a miniature) but I have to say that it does look like it has been worked on by someone with a hammer and centre punch instead of a bushing tool. The history isn't know - the current owner has never seen it working. I completely dismantled it again at the weekend to make the tooth count but when I've figured it out, I'll take some photos. But for now, I think I've reached the end of the line.
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement.  You might find this helpful. 704789946_TZIllustratedGlossary(2).pdf
×
×
  • Create New...