Jump to content

Gingerr6

Member
  • Content Count

    68
  • Joined

  • Last visited

  1. Thanks. Looks like the pinion snapped when i took the hands off Many thanks.... Sent from my SM-G920F using Tapatalk
  2. Hi all. Quick question. Does the second hand fit in or over the pinion?? The hour and minute fit over is the second the same ?! I relumed a dial but can't get the second hand back on. And i cant work out if the pinion has snapped off inside the second hand as i cant get it to stay put. Cherrs. James. Sent from my SM-G920F using Tapatalk
  3. Yes full swiss movement. sellita started producing the 200 series. These are identical to the 2824 with the addition of an extra jewel. (i think) Sent from my SM-G920F using Tapatalk
  4. Love the green. Much more vibrant than mine is that an aftermarket part or did they produce it in a model? Sent from my SM-G920F using Tapatalk
  5. Hi all. So as a 40th present from my dad i was given a voucher for a watch. I was torn between the blue sunburst dial or the green bezel. I think i made the right choice. One reason for the choice was the movement. Based on the ETA 2824 with my limited knowledge a really solid movement. See for your self James. Sent from my SM-G920F using Tapatalk
  6. Full strip of keyless I suspect will be needed. I have pushed it back up from the side before but it depends which side it is stuck under. Sent from my SM-G920F using Tapatalk
  7. Love this post. Makes absolutely no scene to me :) long way to go. Sent from my HTC One using Tapatalk
  8. I try and fit the seconds jewel 1st then lower and try to line up the screw holes. Most of the time the other just line up with a little luck :) Sent from my HTC One using Tapatalk
  9. I think keyless is where we all start lol. Sent from my HTC One using Tapatalk
  10. Maybe it does. http://www.eevblog.com/forum/product-reviews-photos-and-discussion/weishi-mtg-3000-'multi-function-timegrapher'/?action=dlattach;attach=26335 Sent from my HTC One using Tapatalk
  11. Interesting. I have a Pre amp. Can't see the Mic needing power ?? Sent from my HTC One using Tapatalk
  12. So with palet removed. Gently push barrel(make sure it goes ALL the way round ) . All train wheels and escape should move freely ?? Replace palet and balance. If the balance is in correctly the watch should be good ?? Sent from my HTC One using Tapatalk
  13. The top gear of the escape wheel is not seated in the top bridge jewel and is not engaging with the second wheel ???Sent from my HTC One using Tapatalk
  14. Thanks. Kept getting whole units :) Sent from my HTC One using Tapatalk
  15. Hi guys. Anybody know if I can get the above want to use with watch o scope ?? Cheers James. Sent from my HTC One using Tapatalk
×
×
  • Create New...