Jump to content

Recommended Posts

That is an Accutron tuning fork watch. I wouldn't advise a newbie to attempt this. The repair would require a microscope, an Accutron tester, a multimeter, a variable power supply and specialized tools.

There are a lot of articles and videos on the web explaining the inner workings of an Accutron. Absorb everything you can and then decide if you are ready for it.

If you are looking for a battery watch to dabble with, perhaps a modern quartz watch would be a good starting point. Or an electromechanical watch like a Timex Electric, Hamilton Electric, Dynatron, Cosmotron.

Link to comment
Share on other sites

26 minutes ago, HectorLooi said:

That is an Accutron tuning fork watch. I wouldn't advise a newbie to attempt this. The repair would require a microscope, an Accutron tester, a multimeter, a variable power supply and specialized tools.

There are a lot of articles and videos on the web explaining the inner workings of an Accutron. Absorb everything you can and then decide if you are ready for it.

If you are looking for a battery watch to dabble with, perhaps a modern quartz watch would be a good starting point. Or an electromechanical watch like a Timex Electric, Hamilton Electric, Dynatron, Cosmotron.

Thanks. 

Link to comment
Share on other sites

Sure is beautiful though, isn't it? I've been researching and accumulating tools, power supplies, and meters to service 218 movements for quite some time now, and it's still very intimidating.

If you do try to tackle it, let us know! I've got a half dozen movements at home in the queue.

Link to comment
Share on other sites

4 hours ago, ManSkirtBrew said:

accumulating

the other thing you want to accumulate if you working on tuning fork watches are the parts. In particular the index wheel's. They have a habit of not lasting forever they have held up quite well but the super tiny teeth just don't last forever so really want to have key spare parts just in case.

Link to comment
Share on other sites

4 minutes ago, JohnR725 said:

the other thing you want to accumulate if you working on tuning fork watches are the parts. In particular the index wheel's. They have a habit of not lasting forever they have held up quite well but the super tiny teeth just don't last forever so really want to have key spare parts just in case.

Has anyone, outside of the factory, succeeded in making a new index wheel?

Link to comment
Share on other sites

2 hours ago, HectorLooi said:

Has anyone, outside of the factory, succeeded in making a new index wheel?

before I get into index wheel's let's see what were talking about that has index wheel's. The first website talks about the tuning fork watches. On the second page is the gallery page see how many tuning fork watches you see? I'm not seeing at something in particular so I think at least one watch or actually several are missing. The link scroll down until you get the tuning fork watches he mentions the one that's missing but doesn't have any pictures. The second link is interesting because basically it's the contents of the book which has been referenced in the first link somewhere in the website they talk about this book if you're into electric watches the book is nicer than the website though and is still missing at least one picture

okay found the missing watch which brings up a question who made their index wheel? We have the Russians on the fourth flank with their clone of the 214 and their stylish different color. We of the Swiss working out how it to break Bulova's patent sort of with their index wheel which is a different number of teeth in fact in Bulova's watches. Then we have citizen that has a different version of the 219 and I guess because citizen of Bulova working together they probably made the watches together probably the same machinery

then there was the re-issue a tuning fork watch from Bulova no idea whether they recycled or had a backlog of index wheel somewhere although I don't think so.

So as far as I know other than the minor mysteries I brought up only Bulova made index wheel's with a certain mystery as to how they were actually made.

 

https://electric-watches.co.uk/movement-types/tuning-fork/

https://electric-watches.co.uk/movement-gallery/

https://doensen.home.xs4all.nl/contents.html

https://sovietunionussr.com/slava-transistor-tranzistor-very-rare-tuning-fork-gold-plated-ussr-wristwatch/

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I used to be quite active on The Lotus Forum when I owned my Esprit. I was there for so long, Bibs asked me to be a moderator. I'm not sure how long I did that for, but I think I turned into the second longest serving moderator. When I 'handed back my keys', Bibs made me a Full Forum Member. Normally this is a paid membership. My reward I suppose for helping out for many years. Bibs (forum owner) is quite active on there and if I am not wrong, don't quote me in other words, I think he once said that the money from memberships didn't cover the running cost. He adds money himself to keep it going. Does Mark have any sort of subscription scheme on here? I'll admit that I never paid to be a member on TLF. I should have. I never did. I agree that it would be a good idea that there is some sort of contingency plan for this forum. I intend on becoming more active on here. Life has just been getting in the way recently. I enrolled on Mark's watch course and was keenly doing that, but even that has had to take a back seat for a while. I am looking forward to getting back into that and also starting to do work on the clocks that I have been amassing. To do that successfully, I see myself needing to lean on the other members here. If for whatever reason this forum was to close, I think a great many of us would struggle.
    • I think we are about there, if there were still lots out there then the cost of a watch from 5 years ago would be around the same as it is now (allowing for inflation). Given that the price has gone up several times over we can only assume that supply cannot keep up with demand so we must be at or past peak supply, especially if the trend continues. I see even places like Australia, Ukraine and even South America are selling watches on eBay, picking over their stocks, mixed in with fakes and Frankenwatches etc.
    • I understand the demand bit, the generation below me 30ish are too technology engrossed to own a mechanical watch and they just dont like old stuff. I also consider myself at the getting on age of 57 to be a rare find of someone that likes old stuff, i did buy an almost 100 year old book yesterday titled " The New Modern Home " printed 1929.  Cost me a quid. What i was trying to work out is if we have reached a volume peak of watches being discovered hidden in the back of drawers.  Those watches that were hung onto until they entered the hands of the non sentimental generation. 
    • Even for myself who only started getting into watch repair/servicing during COVID I have seen a huge jump in watch prices - we have a 404 channel on this forum. When I started you could relatively easily find a watch on eBay to restore and put onto the channel, however this is now almost impossible and the only feasible solution is to buy a job lot with an average price <4.04. Even watches sold for parts/spares are 3 or four times the price of only a few years ago. Why - Either Demand must have increased in order to push up the price, or supply is reduced. I think it is a little of both, I think that most watches in the UK/US may have been picked over, which agrees with most of what @Neverenoughwatches says so supply of all kinds of vintage watches, including tat is dwindling. As a double whammy I think that more people are wanting watches, either to work on, or as a way to differentiate themselves from the Apple Watch and FitBit crowd. The upshot is that half decent watches that require restoration are now $500 instead of $100 and cheaper watches (Seiko 5 etc) are now $50 instead of $10, and even Mumbai Specials and garbage are now pushing $50 each. When - how long will this last, I think that most of the people who are returning to mechanical watches are those that have previously experienced life without them and want to return to something with a bit of personality that doesn't buzz every 10 seconds on your wrist and tell you how many steps you have done today. i.e. the 30-40+ generation. My son who is 17 has several mechanical watches but only wears one on a special occasion and is obviously only aware of them at all in part due to my hobby. I asked him the other day how many of his friends wear a watch and he told me that some use a smart watch but most just use their phones. So as I see it, demand will start to fall once the sub-thirty crowd start becoming the majority and/or the older amongst us stop buying watches and switch our attention to mobility scooters and trying to remember our bank password. Price - I think this is here to stay, even if demand does start to drop as the older generation becomes to decrepit and stops buying and the younger generation isn't interested in buying, supply will become progressively less as time goes on as more vintage watches become lost or broken beyond repair. I think the prices will plateau at some point as an equilibrium is reached as reduced demand is balanced with reduced supply, i.e. less and less people buying less and less watches. Sorry for the long ramble!
    • Hi. Use a PVA based glue, gorilla glue it dries transparent then do as advised by Old Hippy, smoothe down using very fine  0000 wire wool and either French polish or beeswax for a finish.
×
×
  • Create New...