Jump to content

Seiko Owner Seeking Help

MJR123

By MJR123
in Introduce Yourself Here

 Share

Recommended Posts

MJR123 New Member

MJR123

Posted
Posted

Hello, I’m new to this community and join for a slightly different reason to most I think. I have no experience fixing watches but have recently found a watch that my late Grandfather gave to me as a 13 year old. At the time I did not appreciate the watch and put it in a drawer, where it remained for many years, until I found it recently during a clearance of the house. 

I can now appreciate the watch, and although it is not the most expensive of time pieces it is a nice piece and needs to be restored to good working order. It is a vintage 1980s Seiko H601-5479 mens dual wrist watch (ani/digi). It is in relatively good condition externally but has no power. 

Ive taken it to a high street jewellers in the UK, who sent it to Seiko. Unfortunately Seiko etc were unable to fix it due to its age and parts being obsolete. They recommended a clock and watch repairers who has examined the watch and noted :

‘Leaking battery. Insulator present, contacts cleaned, battery replaced. No response from unit, apart from flash of LCD during swap of battery, possibly caused by static’

This repairer was unable to go any further with repair and suggested a specialist. 

Since this time, mid August (2022), I have contacted multiple specialists, all of whom have declined to accept the task of trying to restore power to the watch. 

I’ve seen that there are enthusiasts on this site that have repaired 1980s ani digi Seiko watches. Can anyone please recommend any repairers in the UK that may be able to assist me ? The watch holds sentimental value and will be kept as a personal item. I’d really appreciate any advice around this… who knows, worst case, it could become my personal reference point for learning to fix watches 🙂 

HectorLooi Distinguished Member

HectorLooi

Posted
Posted

Welcome to WRT @MJR123

I look on eBay for Seiko  H601-5479 and found many for sale or auction.

Your best bet would be to get a working donor watch and transplant the movement into your watch.

Since the watch is of sentimental value, it's best to practice on some scrap watches first before attempting the actual transplant.

Good luck and don't be afraid to ask questions. 

  • Like 1
  • Thanks 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • GPrideaux
      Bulova Rubaiyat 1920/21

      By GPrideaux · Posted

      I'm sure it's the ancien. My measurements: A = 342. The slight bend in the pivot would make much less than a thousandth of a mm difference to this so I don't think 348 is plausible unless there has been significant wear on the pivots. B is hard to measure without first removing the balance wheel. I measured to the other side of the balance wheel as best I could (263) then subtracted the thickness of the wheel (69) to get 194. This could easily be three or four hundredths out, so 195 looks right. (196 could also be right.) J couldn't be measured. I did my best to measure where the balance wheel has been riveted on and got about 95, so 85 before riveting is plausible. (60 is not.) G again couldn't be measured without first removing the roller. I get 37 where the staff emerges from the roller so 41 at the other end of the taper seems plausible. (43 is also plausible to me.) K = 60. (Definitely larger than 55.)   I've never replaced a balance staff; it'll be a new adventure for me. I'll have to read up on how to maximise my chance of removing the old one without damaging the balance wheel without having access to a lathe. I also need to explore how to remove the roller without damaging it. I won't actually place an order until I've gone through the rest of the movement. With the number of issues I've already found, I'll be amazed if I don't have more surprises in store. There are some watch part suppliers in Australia but nothing like Cousins or Otto Frei or Jules Borel. AllTimeCo is fine for basic parts for modern watches: batteries, bands, some crowns, stems, seals, movements, some tools, etc., but not really anything for vintage watches. Australian Jewellers Supplies is similar. Cousins charges about £9 for shipping to Australia which is about AU$19 and not too bad (considering Australian parcel post is $11) but I still want to minimise the number of times I'm paying it. I need to explore other options closer to home. There may be something in Singapore or China that would have what I want and ship it faster/more economically.  
    • steve1811uk
      Rolex 3135 rate variation with temperature

      By steve1811uk · Posted

      Hi, I just finished the service of a Rolex 3135. Amplitude is great, 295 degrees horizontal after 2 hours and 280 after 12 hours. Vertical positions are 25 degrees down on those. I am however seeing a rate variation with temperature. I have 0 SPD on wrist, say 38 degrees and +7 SPD at 18 degrees room temperature. That equates to +0.35 SPD which is within spec I believe (+-0.5 SPD/ Deg C max). It just seems more than I would expect from such a high quality movement. To put that in context, I see similar rate variation with temperature for a Seiko 7S26. Just wondering what you guys see. Thanks, Steve.
    • Endeavor
      Beginner advice - cleaning in an apartment

      By Endeavor · Posted

      For years I've done it the el-cheapo way (read: cleaning by hand). Bought a 2nd Elma S15(H) ultra-sonic, including proper cleaning-fluids (Elma WF Pro (cleaning) & Elma Suprol Pro (rinse)) and entered a complete different cleaning world. These cleaning fluids are none-water based and not that easy to obtain. Initially I bought these fluids in Germany "SKSONIC" (www.sksonic.de) but last year they stopped shipping international. Perhaps they resumed international shipping? You can always ask them. You could also ask @VWatchie, he lives "next-door". As for the fumes; I use the ultra-sonic in my garage, partly for the fumes, but more for our dog ...... he goes "bananas" when I switch on the ultra-sonic. Oh, next on your list (if you consider watch-repair as a long-time hobby), a Microscope (up to 50x is enough).  Pegwood leaves, observed under the microscope that is, whole tree-trunks behind 🫣 Ultra-sonic, in combination with proper cleaning fluids, takes care of the cleaning.
    • evenflow
      Greetings

      By evenflow · Posted

      Thank you 
    • evenflow
      Removing the hairspring from a ETA 2846 balance

      By evenflow · Posted

      How do I remove the hairspring from an ETA? 2846. Balance  staff pivot is broken and I need to transfer the spring over to a new wheel. But the spring stud is not removable. It seems it almost looks like a snap ring at the top of the balance cock or am I missing something?
×
×
  • Create New...