Jump to content

Omega 234 SC medicus

David1954
 Share

Recommended Posts

David1954 New Member

David1954

Posted
Posted

I bought this watch from someone who said it belonged to his father.  I knew it was working but not keeping time.  I hoped my trusted repairer could fix it, but he said it needs a new balance spring or assembly.  He has now retired and I don't know how I can get one or if there is another fix?

Can anyone help or suggest what I could try, please?

I know it's not a hugely valuable watch, but I think it's historically interesting and I'd like to have it in my collection and be able to wear it.

20220117_145257.jpg

20220117_145952.jpg

20220117_145930.jpg

Nucejoe Distinguished Member

Nucejoe

Posted
Posted

 Your watch need an overcoil spring but building a balance to a balance complete involves more than just putting the spring on the balance.

There is also the question of quality spring in Omega watches.

Time pieces you mention above are all high quality and best be entrusted in experience hands. 

Good luck 

 

watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi According to the serial number it was made in 1944  and worth  £150 upwards, I supose depending on condition.

sentiments expressed by Nucejoe are worh heeding as in inexperienced hands balances/springs are vunerable and easilty damaged byond repair.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JohnR725
      Parts sourcing for FHF 180 movement

      By JohnR725 · Posted

      I am puzzled by something a snipped out something from your image and what exactly disassemble tell us? my confusion is the symbol for FHF looks like image I have below year symbol as a star and righted this instant are not finding what that means? I suppose we could use the fingerprint system to verify it really is what it claimed to be. Size itself is really interesting there's almost no watches in that particular size. Then were missing details in the photograph above like diameter of movements to verify it really is the size and are missing the setting components.   went to the bestfit book looking at the symbols didn't see it. Look at the link below I did find it back to the bestfit book and yes it really is there https://reference.grail-watch.com/documents/history-of-ebauches-sa/ then bestfit book says lists the size as 10 1/2. one of the problems with vintage watches is finding parts yes a donor watch would be good.
    • Simeon
      Oiling Dubois Depraz chrono module pivots (Omega Speedmaster Reduced)

      By Simeon · Posted

      Actually, this could be the issue. Drag from the module could be overcoming the cannon pinion. It was definitely not at the point that the driving wheel was loose on the cannon pinion, it took a little bit of effort to rotate it when applying the grease. Maybe I need to look again at applying oil to the pivots.    Yeah, it's very annoying. I don't want to give up on it, so back on with it over again until I catch a break. 
    • caseback
      Chinese tools debate

      By caseback · Posted

      The sping is not pushing directly on the cap, but is pushing against the spindle. So, even if the usual black cap is replaced with the micrometer cap, the spindle is still pushed up.
    • Malocchio
      Chinese tools debate

      By Malocchio · Posted

      But he tells that the micrometer cap doesn't screw into the spindle. How can the spring push the spindle up if there's nothing to grip? There is a screw visible on top of the micrometer cap so should it be able to screw into the spindle? I'm feeling really dumb now. Does anyone manufacture that cap as an aftermarket item? Might be worth investing. Ok so the spindle is different, now I get it.
    • JohnR725
      Oiling Dubois Depraz chrono module pivots (Omega Speedmaster Reduced)

      By JohnR725 · Posted

      I suppose? If it worked before and it doesn't work now I guess the question would be why does it not work now? That would come back to if you did not have the chronograph module on will it work or is the chronograph module sucking too much power out of the watch basically 99 usually when they go bad you can hold on the tube part and usually just spin the wheel because it has zero holding at all so usually when they go bad they go bad very bad. You should build hotel when you set the watch as to whether it seems to have any friction or not. I'm just wondering if the chronograph module is the problem.
×
×
  • Create New...