Jump to content

Another Newbie

frenchie

By frenchie
in Introduce Yourself Here

 Share

Recommended Posts

frenchie Distinguished Member

frenchie

Posted
Posted

Hi everyone,

 

Newbie here. I got started because my favorite watch (Swiss Army Cavalier, very basic watch but I like it) broke and the guy at the shop wanted $390 to fix it. He said it needed a new movement... Well, I can't afford that kind of money for a $200 watch.

So I looked into fixing it myself. Bought a few basic tools ($30), a movement (ronda 515, just like the original, for $15 shipped with a battery :) ) and replaced the movement. 30 minutes later : done. 

I skipped the part where I took the whole movement apart, took me the whole afternoon, I was so nervous, I probably took 50 pictures to make sure I could remember !! And of course the next day I found out that I could just get a brand new movement... and Ronda publishes the diagrams of their movements, so putting it back together took less than a couple of hours.

 

My grandfather was trained as a watchmaker. My parents still have all the tools and parts in a really cool cabinet with a whole bunch of tiny drawers. Can't wait to go home and steal the thing :p maybe they won't notice it's missing...

 

Other than that, I also wear a Festina quartz watch (first "nice" looking watch I ever bought as a student... $85... I saved money for a whole year to afford it !), and an automatic Swatch "skeleton style" watch (no dial). Nothing fancy.

 

Hoping to work on a few mechanical pocket watches for fun, and get them to tick back to life. I might play with a couple of wrist watches too if I find an oldie that needs TLC.

Link to comment
Share on other sites
DJW Super WRT Addict

DJW

Posted
Posted

Welcome to the Forum! Yikes, $390! I do this as a hobby, but also do some repairs for a select group of people. I'm by no means an expert at the business end of watch repair, but that sounds wee bit high to me. I repaired/replaced an ETA quartz movement on a Tag Heuer 2000 for a customer recently for $100, the movement was only $19. But that's just me. I really don't know what the going rate is to be honest! I'm sure I was low, but who knows! 

 

Also, be prepared to break the first mechanical watch that you work on (if it's not already broken). I did! I grabbed the movement like I was eating a cookie and snapped the pivot on the balance staff! BTW, that was also my first repair!

 

You can go as far as you want with this, so be prepared to be overwhelmed at first. It does get easier the more you do, though.

 

Regards.

Don

Link to comment
Share on other sites
autowind Distinguished Member

autowind

Posted
Posted

Welcome to the forum's Frenchie, there are all skill levels here and whatever your question someone should have the answer.  As a hobby watches are fascinating,  a watch that is not running is dead,  now the question is why has it died?  Finding the answer and getting it running again can be very rewarding.  If you watch Marks videos you will learn more than from any book and you will also learn the right way to do it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Michael1962
      I'm going to be setting up a decent little workshop here at home.

      By Michael1962 · Posted

      Moved in. Now working out the best place to have things so moving around the room makes sense. The wooden movement testing rig may end up being suspended from the roof with some pulleys and ropes that I salvaged from some alfresco blinds that we replaced. I always seem to salvage things from things we scrap thinking, "I have an idea what I can use these for." I hope I'm not the only one that does that. My wife hates me for it. "What are you going to do with all this crap?" Anyway, here you go. If anyone has suggestions for workflow around a room, speak up. All Ideas are appreciated. The bench on wheels will carry either a laptop or my Samsung table for using with the little camera that is on the tripod for photos while dismantling etc. The small bar fridge in the corners going to have water etc in it and I might move the coffee maker from the kitchen out there as I am the only one that uses it. I want to get an ultrasonic cleaner so I may set up some sort of cleaning rig in front of the glass of the sliding door. Where the grandmother clock is currently standing. I'm hoping that I will be able to transition my working area, which is the table that the stool is sitting in front of, fairly easily between clocks and watches. I'll be doing my best to make sure that tools for each are separatedwhen stored. Logistics. I'll have a bit of wall space for being able to hang clocks if I find some that I wish to keep or hopefully at some time to be able to hang customer clocks for monitoring after servicing/repairs. The clock on the left in the blue pillow slip and the grandmother clock are earmarked for  Jarryd and his wife, Sara. He helped me move the benches in today. And then went on to tell me that ticking clocks drive him nuts. Who doesn't like the rhythmic ticking of a clock? I have a green pad for adding to the bench for a working surface. It is not a cutting mat or one of the Bergeon mats. It is actually a green desk writing mat. Was really cheap and will do exactly what I want, I think. I also have to get the sparkies back that put our new stove in to put some power points on the walls behind the benches. Hopefully this is all going to go well. I'm excited about it. It'll beat having to live out in the garage doing it. The other thing I have to do is cut a circle or square of plastic to go over the bouncing watch or clock part black hole in the middle of the floor. I would pretty much guarantee that anything that sproings off the bench would end up going straight down that drain. 😄      I think I have been on this forum about 4 years and still yet to really strike a blow. That's a bit sad isn't it. Signed up to Mark's watch course and have yet to buy the movement for working on. Have most of the tools I think I will need so now all just a matter of will.  
    • Neverenoughwatches
      Stem removal after fitting hands

      By Neverenoughwatches · Posted

      So leave off the seconds. Stand the movement on its edge, its the dial edge that rests on the pad ( either rubber or cork , something that wont slip ). Use a finger of your left hand to hold the movement upright,  right hand presses the release and flicks out the stem. I do it this way so i can see what I'm under a microscope. But you could hold the movement between two fingers of your left hand, its the right that has to manipulate the stem out by pushing the release and flicking out the stem with  right ring finger nail. Sounds more complicated than it actually is. I guess you could fix a push pin to something solid, then all you need to do is push the release against the pin, leaving your right hand completely free to pull the stem out.
    • HectorLooi
      Battery

      By HectorLooi · Posted

      Try putting everything back together and closing the back cover. I think one of the two springs has to contact the metal casing to ground the casing. So when you press the button, it will touch the contact on circuit board and close the circuit.
    • PeterS
      Stem removal after fitting hands

      By PeterS · Posted

      Yes, the seconds hand is the longest and goes almost to the edge of the dial. I can’t quite picture it how you do it on the rubber pad
    • Murks
      Battery

      By Murks · Posted

      A don't think so it leaked or damaged it because the watch itself works it just the buttons ain't working not connecting with the circuit board have taken more pictures of where the buttons makes contact with the circuit board.
×
×
  • Create New...