Jump to content

To Chime or Not to Chime.


RogerH

Recommended Posts

I would be interested in your thoughts and experiences regarding the matter of striking clocks that have no silence option. Often the whole point of the clock is that it chimes but sometimes, in a more practical sense it can be annoying if it's in the lounge or outside bedrooms etc. You can muffle the bell but more often people just don't wind up the strike side. However, if it's a rack and snail design, the rack can still drop down onto the snail and there will be no power to lift it back up. It will then be sat against the snail permanently  - will this cause any damage? Is there a better option? 

Link to comment
Share on other sites

Hi Roger   I have a c lock on the staircase which has no silent lever and because of a complaint from she who thinks she is the Boss. Complaint was the sriking and ticking so we have a compromise  I dont wind the chine/strike on the clock. Its been like it for years with no adverse effect.

Link to comment
Share on other sites

On my Grandfather clock I've tied the rack up so it won't drop. I think you're right OH, there must be a possibility of jamming or scoring of the snail. I've got a Smiths Westminster chime on the bench at the mo, once it's back together I'll experiment and let you know.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • No matter what I did, I could not get the amplitude more than 240 deg. At least there is 0.2 beat error and minus 1-2 s/d.  So, probably not the happy end I would have hoped for, but still I think the watch turned out quite nice. You be the judge of that. Thank you everyone for your help!  
    • its used to lengthen or shorten the suspension spring from the front f the clock dial, this in turn will give regulation to the clock. Try inserting a pocket watch key or even better the double ended key for the clock into the small aperture on the dial at the top and turning it, you will see the suspension block either raise or lower. If it raises the clock will run faster if it lowers the clock will run slower
    • Grateful for info regarding the nature & function of the horizontal cog and the unit it's on top of in the picture. It meshes with a vertical cog (enclosed in the unit) on the arbour which is supported at its other end by the back plate of the dial unit to which it is not quite perpendicular...
    • does anyone knows what type of battery this digital Watch takes?  
    • Hello good watch folk ,I  just fancied a light hearted discussion after my head was starting to spin over Epilame 😅. Specifically I'm meaning the sale of vintage watches, say nothing past the 1980s market. The stuff we see on ebay and other similar sites and found at carboots, curio shops etc. And are  we thinking its reaching a peak volume ?  Younger generations clearing out passed parents and grandparents possessions.  The younger folk are not as sentimental as the old fogies ( I'm now nearly at an age that i used to think was old fogie age ). When might it have started ?  i often wish i discovered the hobby much much sooner when selling your grandfathers pocket watch at a boot sale for a few quid was just a way to offload some tat. And when might it slow down. Thoughts anyone ?
×
×
  • Create New...