Jump to content

Mystery tool

LittleWatchShop
 Share

Recommended Posts

  • 1 year later...
LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted
2 minutes ago, RichardHarris123 said:

Nit size?  Like the thing's people get in their hair?  Hehe. 

Yeah, that threw me.  The size of the hole is the same as the stake: 4.7mm.  All of my "standard" stumps are 4mm, so this little thing is a **BLEEP**.  One would think that my Dad (the source of this thing) would have had some stumps to fit it, but I have not seen anything that fits the bill, but I may have overlooked them.

Link to comment
Share on other sites
LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted
1 minute ago, RichardHarris123 said:

Could you make stumps ?

Yes, but it would be a lot of work.  I think they have to be hardened--still trying to get my head around metallurgy.

But...at the end of the day, I don't need another staking tool.  I think I have five now.  What I do want to know is how my Dad used the tool.

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
On 5/21/2021 at 8:54 PM, LittleWatchShop said:

I am gonna search around the watch bench and see if I can find these additional parts.

I was thinking that looks like the one that I have. Not sure where mine is right now and no there were no little bits and pieces with it. But my guess is that a long time ago before we ever had ours the bits and pieces migrated to a standard staking  Set.

  • Like 2
Link to comment
Share on other sites
LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted

_____

As an aside...Ebay is a great place to do research when you are trying to suss out the purpose of a tool are dig up information on a watch.  Odd to use it that way, but it works.

I actually have two of them!!  One from my Dad and the other was in a watch bench I bought (I think that is where it came from...stuff just shows up around here!)

Link to comment
Share on other sites
RichardHarris123 Distinguished Member

RichardHarris123

Posted
Posted
13 minutes ago, JohnR725 said:

I was thinking that looks like the one that I have. Not sure where mine is right now and no there were no little bits and pieces with it. But my guess is that a long time ago before we ever had ours the bits and pieces migrated to a standard staking  Set.

Maybe. 

13 minutes ago, LittleWatchShop said:

_____

As an aside...Ebay is a great place to do research when you are trying to suss out the purpose of a tool are dig up information on a watch.  Odd to use it that way, but it works.

I actually have two of them!!  One from my Dad and the other was in a watch bench I bought (I think that is where it came from...stuff just shows up around here!)

It's disappeared from my house, other side of the worm hole. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Kkramme
      Blew it with a coil

      By Kkramme · Posted

      Unfortunately after much investigation, apparently the coil has been discontinued! Shall I get my service guy to try the solder or the conductive paint? 🎨 Final recommendation please🙏
    • Dmitry
      Eta 2970-1 rotor mount stops watch

      By Dmitry · Posted

      Here are the pics of the bridge. Looks correct, but as soon as I screw on the rotor, the watch stops. Video here: https://1drv.ms/v/s!ArG5E62RGctxjokY5ws85BzuJLVakA   Pics. Might have figured it out. I have been working on this watch for a while and since I got it as a non runner in a terrible shape, there was no guarantee that parts were proper. I think the main screw that was used on the rotor was too long, so it was stopping the main train. As soon as I fished out a much shorter and larger headed screw, things were good again. Please celebrate with me.  
    • KarlvonKoln
      B-Dip residue?

      By KarlvonKoln · Posted

      One-dip or naphtha should be safe, but are you sure it isn't magnetized?  I would also check that.  Although, if that balance is from an Elgin 760 0r 761, I would think it would have a hairspring of non-magnetic alloy.
    • Curare
      Spell Check

      By Curare · Posted

      Hi, Is there a spell check function available when you are posting ? Regards CJ
    • Curare
      Replacing armoured crystal in a front loading watch case…

      By Curare · Posted

      Hi John I just did a Seiko Lord-Matic a front loader without a split stem, I used a crystal lift to remove it, although I had to have it that tight I though I was going to break the lift before the crystal would budge. So I decided that the press would be a better option as I think crystals with tension rings resist a lot of compressing. I used a crystal press to repalce it and the bezel with no issues, obviuosly a different watch to the Omega. I just took my time and kept inspecting the installation progress bit by bit Regards CJ
×
×
  • Create New...