Jump to content

Fifteen Ticks To The Minute.

clockwatcher
 Share

Recommended Posts

clockwatcher WRT Addict

clockwatcher

Posted
Posted

Are you sitting comfortably? Then I'll begin!

 

A while back I bought myself a Favre-Leuba quartz watch with an ETA 555.415 movement to add to my small F-L collection. It was a non-runner but that wasn't a particular concern. A new battery made no difference so okay, display only.

 

More recently I bid on and won a going ETA 955.412 movement. I had misremembered that I had a 555 in the watch, not a 955 as I thought. No matter, I would swap them over. The first thing to tackle was the date ring as the donor date was at 6 and the recipient at 3. With the aid of Mark's excellent video I exchanged the rings although when I changed the date it felt a bit stiff, despite a dob of lube on the ring teeth. I should say that in the interim I had a crash course in tweezer wielding and sudden undesired launching of very small parts into the ether. An LED torch and lots of hands and knees were all that was required to remedy the matter and I only had to search for the same part twice.

 

Again, no matter. So I put the dial and hands back on, set it all in the case and added battery. Bingo, the watch went!

 

It was only after a few seconds that I noticed that the second hand had a nervous tic! This is the bit that has me stumped. The second hand moves once every four seconds! I know this because every time it moved it jumped four seconds - hence 'Fifteen times a minute'.

 

 Suffice it to say that the battery was removed and I contented myself by entirely disassembling the 555 movement for practice.

 

2070.gif  Has anybody any understanding of what's happening? The 955 was going quite normally before I mucked around with it! 

 

Cheers

John

Link to comment
Share on other sites
clockwatcher WRT Addict

clockwatcher

Posted
  • Author
Posted

No, Dumb -di-Dumb-Dumb-Dumb is what I am! The watch has an octagonal crystal and when I put the back on with my press I bust the **BLEEP** glass! I don't know where I'm going to find another - it's one with long sides and short corners.

 

If I bend over, will some one please kick me?!

Link to comment
Share on other sites
clockwatcher WRT Addict

clockwatcher

Posted
  • Author
Posted

Bob, I've looked at all the images of F-L watches that the web offers but haven't yet seen an identical watch.post-742-0-91241000-1428964352_thumb.jpg

 

I don't even know what model it is unless the number 5955-53 and the infinity fish shape on the back are a clue.

 

Any ideas about crystal specialists who might carry a spare? To be honest it needed a new crystal as the old one had an ugly scratch and, not being acrylic, would have taken some serious polishing out.

Link to comment
Share on other sites
DMLarsen New Member

DMLarsen

Posted
Posted

I  think i just watched a video from Mark today that had something that sounded similiar to what you described.   I believe If I remember right, he was replacing a battery to a movement and it was a matter of reprogramming it to get it back to one second intervals?  I have tried finding it to no avail.

 

Sorry this post was uselss nonsense. I hope get it figured out

Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Hi clockwatcher,

 

The shape of that crystal reminds me of a newer Seiko I fixed once. The crystal was glued in place...and I replaced it with a Seiko part.

 

Well, all that said, I found back then that when crystals were not available or custom, there are unfinished blanks that can be used -- this might be old news for you, I'm just stating a "discovery" :)  - In any case, I believe that if you don't have the equipment, some suppliers will shape it for you...and you might get at least mineral glass quality to that! Worth exploring that avenue, I think (?).

 

Cheers,

 

Bob

 

PS. a good place to start would be Esslinger for unfinished glass.

Link to comment
Share on other sites
clockwatcher WRT Addict

clockwatcher

Posted
  • Author
Posted

Nothing about watch repairing is old news to me Bob, which is why I'm finding so much on the forum absolutely fascinating.

 

I'll have at look at what Esslinger can offer but there's always the option of just getting some flat acrylic and shaping it myself. In common with most of my watches, this F-L doesn't stand me in very much so I'd be content to have it for display only.

 

Thanks for the advice.

 

:thumbsu:

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • nevenbekriev
      Deciphering mainspring specifications…

      By nevenbekriev · Posted

      Hi John, The most important parameter of the spring is the thickness. The lenght is something that one would not consider as obligatory, as relatively big variations will not affect anything in significant way. The barrel size is related to the barrel and has nothing to do with the spring. Yes, the spring is designed to work in a barrel and the size of the barrel matters, but let this parameter be chosen by the movement manyfacturer, not by the sping manyfacturer who doesn't have idea in what kind of movement the spring will work. Sometimes the washer in which the spring arrives will be bigger than the barrel and there will be no way to just push the spring in the barrel and be happy. Well, if this is a problem for somebody, then probably He is a person with to many problems that will be verry hard to help to in any way. By the way, why You are changing the spring? Is the old one broken?
    • Waggy
      404 Club Reboot

      By Waggy · Posted

      Lets give it to the end of this month to get all the votes in, then we can call it?
    • Waggy
      Without Our Forum

      By Waggy · Posted

      OK, I have created a solution to the above, I have made a fake protonmail account, if you PM me I can send you the password, just click on the contact link and enter your information, this should be as secure as it gets:   Website:     Link Login: email as highlighted in above screenshot WRTArk    @   Proton.    me Password: ..........PM me and I'll let you know   Only intend to use the contacts function, not the email or anything else - we are all grown ups, please act responsibly.
    • eccentric59
      404 Club Reboot

      By eccentric59 · Posted

      I went with 8.90£ because 12th century Italian mathematicians are always excellent topics to bring up when trying to get your guests to go home. 
    • Zendoc
      Without Our Forum

      By Zendoc · Posted

      As a beginner, I’ve found this forum invaluable. I doubt I would’ve persevered without its support. I’ve had the confidence to attempt things that seemed to me impossible only because I knew there were patient and giving folks gathered around this watering hole, available to share their skill.    I would very much like to know where to go if this one dries up and everyone needs to decamp.  There’s something special about the folks gathered in this group.  How to keep in touch?  
×
×
  • Create New...