Jump to content

LEpine La Paris Pocket Watch - Anyone know about these?


taymo

Recommended Posts

Hello,

A family member pulled out this pocket watch over the weekend. I was looking for any background on the watch or point me to someone who knows LEpine watches well. Can you tell if this is a real LEpine? As you'll see, the watch requires a key to wind, as opposed to using the crown. So I believe this is an earlier pocket watch. The crown has a serial number of 116 or 911 - depending on the orientation. I'm assuming it would be 116. I can provide more photos if needed.

The balance appears to be on the outside, which makes me believe it may be an earlier dated watch. It also has a name scribed into the silver section - Avance...something. The steel pieces are black polished and the scratches shown in the photos are not as prevalent in real life. The hands and screws are also heat treated/blued. I can tell by hand because they are different hues of blue. It's very neat.

Anyways, please ask me any questions that you have on the watch. I'm very interested in knowing your thoughts. 

Thanks for your help.

20201225_203553.jpg

20201225_203856.jpg

20201225_204226.jpg

20201225_204234.jpg

20201225_205844.jpg

20201225_212231.jpg

Link to comment
Share on other sites

A piece such as this should come with a Provenance. You need to ask them how and when they got where from and where is the paper work. Something tells me this is not right its just a feeling I have. The scroll work on the balance cock looks as if it has been made by two different workers it is not consistent all the way around. The dial that is damaged is just enough to make it look as if its old but doesn't show any other wear. Those brass pins are modern, I know pins get lost or fall out and get replaced these are recent.   

  • Like 1
Link to comment
Share on other sites

Lepine was most well known for inventing what is essentially the modern watch caliber, doing away with double plates and pillars and very notably the fusee. This made a huge splash in watchmaking at the time, and he was quite famous.

 

This is a fusee watch, most likely verge escapement, and looks a little more modern than a verge fusee that would have predated Lepine's invention. It could be from his workshop, or could be a fake (faking watches has been going on for hundreds of years). I'd need to dig in to some books to have a better idea.

 

Even as a fake it is of some interest, just as fake artwork often has its own merits. They couldn't order case dial hands and movement from china for the cost of lunch back then- any watch was a valuable object!

 

The wikipedia on Lepine is surprisingly thorough

https://en.m.wikipedia.org/wiki/Jean-Antoine_Lépine

  • Like 1
Link to comment
Share on other sites

5 hours ago, oldhippy said:

A piece such as this should come with a Provenance. You need to ask them how and when they got where from and where is the paper work. Something tells me this is not right its just a feeling I have. The scroll work on the balance cock looks as if it has been made by two different workers it is not consistent all the way around. The dial that is damaged is just enough to make it look as if its old but doesn't show any other wear. Those brass pins are modern, I know pins get lost or fall out and get replaced these are recent.   

Thanks for pointing these items out. 

As a follow up, there is no damage on the dial (At least the damage I think you are referring to). The "damage" in the photos is really just dirt on the glass cover. I've attached two more photos of the dial in case the reveal something as well.

It does come with a backstory and a handwritten letter from the 1800s. I was trying to look at it's features to determine if what we see could place it in that timeframe first.

Thanks again for your thoughts.

20201228_090454.jpg

20201228_090512.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That's the right technique Mal 👍 If you are ok with a loupe ( which I'm not ) then pick up the dial in your left hand and make a tripod holder out of 3 fingers and then exactly how Mal and me described with your right hand, press and flick out the stem at the same time. You need three fingers to do this, i use my ring ring finger , sounds like mal uses his little finger, just whatever you feel comfortable with. The key point and dangerous side to this is the tweezers or driver slipping off the release screw. Stablise your left arm by resting your elbow on your bench, so that you can hold the movement horizontally flat, use a x5 loupe to view  and good light so you can see well and have a good tight fitting screwdriver to push the release down. Or as suggested a pusher mounted solid upside-down somewhere then all you need to do is push your movement up to it. I'll rig something up in a bit to show you what i mean.
    • Thanks Michael, shes a real soldier, it would take a tank to knock her off her feet.  Shes surprised even me and i knew she was a tough cookie.  Good for you Michael, you keep at it. I've been reading your posts re. your watchroom they're inspiring and it doesn't matter how long it takes you to get there its about the journey. Rome wasn't built in a day, our watchcaves are our solitudes, our own little empires where we can shut ourselves away from the crap that goes on around us in the world. I look forward to seeing you progress, I have my own ideas how i like to do things. But in answer to your questions on that thread, just let your workspace evolve around you and how you work. You wont figure it out straight away but you will know when to change it and when to leave it alone. But most of all just enjoy it.
    • That can be tricky. Sometimes I hold the movement from the edges in left hand and with right hand I push the release with tweezers and simultaneously pull the stem out with right hand pinky or something. 
    • I see what you mean. I must admit I’m not entirely comfortable with that but I can’t see a better method than what you suggest. I’d like to see something like this mirror with a short spike: https://www.cousinsuk.com/product/mirror-for-observing-movements Place it on, push the spike on the post with one hand and release the stem with the other hand. Minor problem, it doesn’t exist.
    • Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
×
×
  • Create New...