BFG 866 movement reassembly - help needed!!
-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
By eccentric59 · Posted
Hi Jeff. Welcome to WRT. For a moment there I thought i was reading my own biography. I too work in IT, have a degree in art and love all things mechanical. If you're left-handed too, then I'll have to check Ancestry.com to see if I have any relatives in TN. 😉 I've found the best solution for me was to get a set of these and clamp them to a pair of readers. If you stick with it, you'll want to get a microsocpe, but that's a ways down the road. BTW, in order to not frustrate yourself in the beginning, You'll need to get some decent screwdrivers and tweezers, and learn to dress them properly to keep those tiny parts from flying all over the place. -
About 100 years ago , Mr Wyler introduced his design, pattenting didn't take long. Adverts claimed it to resist shocks when dropped from a aeroplane, didn't say if the guy who wore it survived or not. lol
-
One of the troubles I have with Evaporust and the traditional citric solutions is they are quite sticky and I find aren't removed without significant physical scrubbing which is difficult from small gaps like between wheel teeth. Does this formula clean up easily?
-
I use Mohawk lacquer for brass for all the brass on the torsion clocks I restore Dell
-
Recommended Posts