Jump to content

Recommended Posts

Posted

Does it glow at all any more? That's a Tritium dial (and hands) and was originally light ivory, which will darken with age (and avoidance of sunlight).

If you were re-doing the minute hand, I'd do the hour hand as well. BUT, if you don't do the dial at the same time, what matches today, may not match tomorrow, because Tritium color changes.

My blue dial 9411 had extremely dark lume plots due to being out of the sun for decades. Once it got some UV from the sun, it began getting lighter.

I also happen to have an earlier (transitional) version of the 2000 chronograph I purchased in Salzburg, Austria (about a block from Mozart's house). It had a Heuer box, instruction sheet, case back and crown, but Tag Heuer on the dial. It's my back-burner project but since I have a spare complete movement I may tackle it after I get this Omega 565 behind me...

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
    • I've repaired a few of these, having some success with stripping and cleaning the mechanism.  They are so cheap though, its hardly worth the effort in many cases.
    • Get well soon Old Hippy, torn muscles.,  not good
    • Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
×
×
  • Create New...