Jump to content

A Seiko 5 For Just Over A Tenner...

WillFly
 Share

Recommended Posts

WillFly Distinguished Member

WillFly

Posted
Posted

Following Mark's comments on the robustness of the Seiko 5 movement, I spotted one on the Bay, going for a song - running but stopping here and there. Sounds like it just needs a good clean, and I have friend who lives in Bursledon who's an amateur, but very experienced cleaner and servicer of basic movements.

 

I'm not a great lover of automatic watches, nor watches with metal bracelets, but I'm curious about this. If it goes well after a service, I can either keep it or sell it on. We'll see.

 

Seiko%205%20face.JPG

 

Seiko%205%20movement.JPG

Link to comment
Share on other sites
autowind Distinguished Member

autowind

Posted
Posted

Having used one for over 10 years in an industrial environment, where it was exposed to shocks off the richter scale and clouds of very fine dust,  I can vouch for the robustness of the design.  Mine was a 15 jewel and the only un-jewelled train pivot hole elongated, stopping the watch,  yours being 17 jewel this will not happen to yours.  With a clean and oil every 5 years or so the life expectancy of a Seiko 5 must be measured in centuries.  It's very much like the terminator,  it just will not stop.  A very nice find Will.

 

RogerC

  • Like 1
Link to comment
Share on other sites
Craig WRT Addict

Craig

Posted
Posted

I've just bought the same watch for the very same reason Will (Marks Recommendation)...But bought mine brand new with tags for £50. The lady seller said any reasonable offer accepted so I plumbed for £50 and she accepted including postage. When I've got the hang of posting my pics I'll show you......Am just thinking now was £50 over the odds? Anyhow it's here now. :)

 

Looking also at Roger's experience with his hopefully a bargain.

Link to comment
Share on other sites
  • 2 weeks later...
ianmedium WRT Addict

ianmedium

Posted
Posted

I have owned two Seiko's with this movement and they have consistently been reliable performers and keepers of good time. I am told as well that they are great for fettling to get even better time accuracy from.
I love Seiko, how many watch companies can offer in house movements for so little?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Dmitry
      Eta 2970-1 rotor mount stops watch

      By Dmitry · Posted

      Here are the pics of the bridge. Looks correct, but as soon as I screw on the rotor, the watch stops. Video here: https://1drv.ms/v/s!ArG5E62RGctxjokY5ws85BzuJLVakA   Pics. Might have figured it out. I have been working on this watch for a while and since I got it as a non runner in a terrible shape, there was no guarantee that parts were proper. I think the main screw that was used on the rotor was too long, so it was stopping the main train. As soon as I fished out a much shorter and larger headed screw, things were good again. Please celebrate with me.  
    • KarlvonKoln
      B-Dip residue?

      By KarlvonKoln · Posted

      One-dip or naphtha should be safe, but are you sure it isn't magnetized?  I would also check that.  Although, if that balance is from an Elgin 760 0r 761, I would think it would have a hairspring of non-magnetic alloy.
    • Curare
      Spell Check

      By Curare · Posted

      Hi, Is there a spell check function available when you are posting ? Regards CJ
    • Curare
      Replacing armoured crystal in a front loading watch case…

      By Curare · Posted

      Hi John I just did a Seiko Lord-Matic a front loader without a split stem, I used a crystal lift to remove it, although I had to have it that tight I though I was going to break the lift before the crystal would budge. So I decided that the press would be a better option as I think crystals with tension rings resist a lot of compressing. I used a crystal press to repalce it and the bezel with no issues, obviuosly a different watch to the Omega. I just took my time and kept inspecting the installation progress bit by bit Regards CJ
    • Zendoc
      Replacing armoured crystal in a front loading watch case…

      By Zendoc · Posted

      Hello All, I’m replacing the crystal in an Omega Dynamic, # 165.039, which houses a cal 552, installed through the front of the case. The replacement Sterncreuz crystal is, like the original, with tension ring. I removed the crystal using a compressed air technique to pop it out.  (I have a crystal lift, but I’m always fearful of marking the crystal edges and so avoid using it as much as possible). Now to the replacement -  any tips on putting the crystal back in?  Am I obliged to using my dreaded crystal lift to complete the task, or how about a crystal press?  I’ve put lots of crystals in using a press, but never with the movement in the watch. The thought of using one with a front-loader makes me very nervous, with the fully assembled watch sitting under the press. How would more experienced folks proceed here? Any advice, gratefully received… John Down Under…
×
×
  • Create New...