Jump to content

my watches

henryr

By henryr
in Your Watch Collection

 Share

Recommended Posts

henryr Member

henryr

Posted
Posted

I'm not a watch collector but may become one. My Accutron 214 that I bought new in 1966 stopped working and after searching for repairers, I found it would cost about $300. So I started searching for good quality used watches and settled on Seiko and Longines. My first purchase was a Seiko Diver 200m 7n36-6A49 in near mint condition. I'm not a diver but it looked cool and was in great condition. After more than 1 month it is still accurate within +-1 second.

I then started reading about HAQ watches and bought a Longines Conquest VHP quartz L237.2 L1.613.9 probably made around 1993. It has not lost or gained one second after 3 weeks. This watch looks like it has never been worn and it came with two extra links, extra pins, original outer box, inner box, instruction booklet in 4 languages including English, the warranty card with fields blank, another small card in Japanese and the jewelry store business card in Japanese. All these items are also in mint condition. Pages of the manual look they were never turned. Even the clasp appears never to have been opened as it is very tight with no sign of wear.,

So Maybe I've caught the collector bug because I continue reading about watches and have joined about six watch forums. 

henryr

 

 

s-l1600 (2).jpg

s-l1600 (1).jpg

s-l1600 (8).jpg

s-l1600.jpg

longine vip 255563.jpg

expanded longines card.jpg

  • Like 1
Hopgoblin Watch Enthusiast

Hopgoblin

Posted
Posted
18 minutes ago, henryr said:

I'm not a watch collector but may become one. My Accutron 214 that I bought new in 1966 stopped working and after searching for repairers, I found it would cost about $300. So I started searching for good quality used watches and settled on Seiko and Longines. My first purchase was a Seiko Diver 200m 7n36-6A49 in near mint condition. I'm not a diver but it looked cool and was in great condition. After more than 1 month it is still accurate within +-1 second.

I then started reading about HAQ watches and bought a Longines Conquest VHP quartz L237.2 L1.613.9 probably made around 1993. It has not lost or gained one second after 3 weeks. This watch looks like it has never been worn and it came with two extra links, extra pins, original outer box, inner box, instruction booklet in 4 languages including English, the warranty card with fields blank, another small card in Japanese and the jewelry store business card in Japanese. All these items are also in mint condition. Pages of the manual look they were never turned. Even the clasp appears never to have been opened as it is very tight with no sign of wear.,

So Maybe I've caught the collector bug because I continue reading about watches and have joined about six watch forums. 

henryr

 

 

s-l1600 (2).jpg

s-l1600 (1).jpg

s-l1600 (8).jpg

s-l1600.jpg

longine vip 255563.jpg

expanded longines card.jpg

I hate to tell you but you are a watch collector. Are you sure you dont want to spend the $300 on repairing you 1966? 

  • Like 1
henryr Member

henryr

Posted
  • Author
Posted (edited)

The Accutron is in great cosmetic condition. With the naked eye the crystal is scratch free and face and hands look new. There are a very few light surface scratches on the back, sides, bezel and bow ties. From a foot away they hard to see. Any idea what it might be worth after repair?

Edited by henryr
henryr Member

henryr

Posted
  • Author
Posted

Just checked ebay for sold Accutron 214 bowtie watches. Most sold for $85 to $185 and one sold for $300. I searched more accutron repair sites and $300 is typical, just for a cleaning and lube. If it needs any parts like coils, cost could easily be $500 or more and  that doesn't include any cosmetic work.  I'm going to sell  is as non-working.

bjd1020 WRT Addict

bjd1020

Posted
Posted

Welcome to the club. Ebay might say one thing but your heart may say another. Im pretty bored here on lock down you should let me fix that watch of yours. I had an old luminox that the tritium tubes died on that I replaced. I also rebuilt an oris TT1 from scratch that was my baby. Took me a whole year to get that 7750 down but now ive rebuilt so many of them that I can pretty much do it with my eyes closed.

Sent from my SM-G950U using Tapatalk

FLwatchguy73 Super WRT Addict

FLwatchguy73

Posted
Posted

Replace the movement... That's what I did on mine. I bought a working 218D movement on eBay for about $50. Relatively simple swap, though the 214 is a bit more rare and desirable, and expensive. You can find complete watches too and just pull the movement. It's a place to start for sure.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • steve1811uk
      Rolex 3135 rate variation with temperature

      By steve1811uk · Posted

      Looked into this some more and I believe that some of the increase in rate is attributable to the drop in amplitude after 12 hours off wrist, from 300 to 275 degrees horizontal and some is due to the lower temperature (38 to 18 degrees). I can see that approx 3 to 4 seconds a day is attributable to each. I can be happy with that.
    • Nucejoe
      Removing the hairspring from a ETA 2846 balance

      By Nucejoe · Posted

      Link below shows the tool used to push the stud out. You can make the tool , just file a screwdriver to this shape.  https://www.esslinger.com/bergeon-16918-etachron-stud-remover-screwdriver/ There are vids on YouTube showing how the stud is to be  push out. Shouldn't get over creative, just go by this approach.  Good luck.
    • GPrideaux
      Seiko 6105 crown gasket service

      By GPrideaux · Posted

      I tried pushing to dome the washer in and had no success, but stuffing it full of o-ring gaskets worked much better than I expected. It takes some pressure but not as much as you might imagine, but it does take patience ... and a couple of dozen small gaskets. I used the pendant tube of a watch case to stuff the gaskets in as I didn't have a way to machine a tool to suit.
    • GPrideaux
      Removing the hairspring from a ETA 2846 balance

      By GPrideaux · Posted

      I can't answer your question, sorry, but you probably don't what to transfer the spring to a new wheel. Springs and wheels are paired ("vibrated" together) to get the right timing and transferring the spring to a new wheel is quite likely to see you minutes per day out with no way to correct it. Some may tell you to replace the balance staff, but if you're a beginner you're probably better off sourcing a replacement "balance complete" if you can: staff, roller, wheel and spring already assembled as a unit.
    • GPrideaux
      Bulova Rubaiyat 1920/21

      By GPrideaux · Posted

      I'm sure it's the ancien. My measurements: A = 342. The slight bend in the pivot would make much less than a thousandth of a mm difference to this so I don't think 348 is plausible unless there has been significant wear on the pivots. B is hard to measure without first removing the balance wheel. I measured to the other side of the balance wheel as best I could (263) then subtracted the thickness of the wheel (69) to get 194. This could easily be three or four hundredths out, so 195 looks right. (196 could also be right.) J couldn't be measured. I did my best to measure where the balance wheel has been riveted on and got about 95, so 85 before riveting is plausible. (60 is not.) G again couldn't be measured without first removing the roller. I get 37 where the staff emerges from the roller so 41 at the other end of the taper seems plausible. (43 is also plausible to me.) K = 60. (Definitely larger than 55.)   I've never replaced a balance staff; it'll be a new adventure for me. I'll have to read up on how to maximise my chance of removing the old one without damaging the balance wheel without having access to a lathe. I also need to explore how to remove the roller without damaging it. I won't actually place an order until I've gone through the rest of the movement. With the number of issues I've already found, I'll be amazed if I don't have more surprises in store. There are some watch part suppliers in Australia but nothing like Cousins or Otto Frei or Jules Borel. AllTimeCo is fine for basic parts for modern watches: batteries, bands, some crowns, stems, seals, movements, some tools, etc., but not really anything for vintage watches. Australian Jewellers Supplies is similar. Cousins charges about £9 for shipping to Australia which is about AU$19 and not too bad (considering Australian parcel post is $11) but I still want to minimise the number of times I'm paying it. I need to explore other options closer to home. There may be something in Singapore or China that would have what I want and ship it faster/more economically.  
×
×
  • Create New...