Jump to content

Seiko 6R15 center wheel and jewel


Cmmb8519

Recommended Posts

Hi everyone,

 

Trying to source a center wheel and respective jewel for a Seiko 6R15. Photo attached of the broken wheel and jewel.

 

Tried the typical suppliers and for my surprise there aren't many parts available for the 6R15.

 

Any suggestions on source of supply for these?

Any website I can see compatible movements that might still have these parts in stock?

 

Many thanks

 

8936ac352a37f000c3438b2ad2fed909.jpg

 

Sent from my SM-G975F using Tapatalk

 

 

Link to comment
Share on other sites

3 hours ago, Cmmb8519 said:

Trying to source a center wheel and respective jewel for a Seiko 6R15. Photo attached of the broken wheel and jewel.
Tried the typical suppliers and for my surprise there aren't many parts available for the 6R15.
Any suggestions on source of supply for these?
Any website I can see compatible movements that might still have these parts in stock?

Center wheel 224.086 is the same as on 4R series and despite the different number I believe is also interchangeable with the 7S26 B or C.
Seiko is not detailing or distributing fixed jewels anymore, but again I believe it's common with the above.
Cousins UK should be able to order at least the wheel, or if you PM me your address I can gift you the 7S26 parts.

Edited by jdm
  • Like 2
Link to comment
Share on other sites

  • 2 months later...

Hi all,

I got a center wheel from a 7S26, but the number of teeth are not the same as the 6R15.

Still looking for a 6R15 Center Wheel. I have looked in all most common web suppliers and was not able to get it for the 6R15.

Any thoughts on where I can get a Center Wheel for the Seiko 6R15? 

Many thanks.

 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
    • Moved in. Now working out the best place to have things so moving around the room makes sense. The wooden movement testing rig may end up being suspended from the roof with some pulleys and ropes that I salvaged from some alfresco blinds that we replaced. I always seem to salvage things from things we scrap thinking, "I have an idea what I can use these for." I hope I'm not the only one that does that. My wife hates me for it. "What are you going to do with all this crap?" Anyway, here you go. If anyone has suggestions for workflow around a room, speak up. All Ideas are appreciated. The bench on wheels will carry either a laptop or my Samsung table for using with the little camera that is on the tripod for photos while dismantling etc. The small bar fridge in the corners going to have water etc in it and I might move the coffee maker from the kitchen out there as I am the only one that uses it. I want to get an ultrasonic cleaner so I may set up some sort of cleaning rig in front of the glass of the sliding door. Where the grandmother clock is currently standing. I'm hoping that I will be able to transition my working area, which is the table that the stool is sitting in front of, fairly easily between clocks and watches. I'll be doing my best to make sure that tools for each are separatedwhen stored. Logistics. I'll have a bit of wall space for being able to hang clocks if I find some that I wish to keep or hopefully at some time to be able to hang customer clocks for monitoring after servicing/repairs. The clock on the left in the blue pillow slip and the grandmother clock are earmarked for  Jarryd and his wife, Sara. He helped me move the benches in today. And then went on to tell me that ticking clocks drive him nuts. Who doesn't like the rhythmic ticking of a clock? I have a green pad for adding to the bench for a working surface. It is not a cutting mat or one of the Bergeon mats. It is actually a green desk writing mat. Was really cheap and will do exactly what I want, I think. I also have to get the sparkies back that put our new stove in to put some power points on the walls behind the benches. Hopefully this is all going to go well. I'm excited about it. It'll beat having to live out in the garage doing it. The other thing I have to do is cut a circle or square of plastic to go over the bouncing watch or clock part black hole in the middle of the floor. I would pretty much guarantee that anything that sproings off the bench would end up going straight down that drain. 😄      I think I have been on this forum about 4 years and still yet to really strike a blow. That's a bit sad isn't it. Signed up to Mark's watch course and have yet to buy the movement for working on. Have most of the tools I think I will need so now all just a matter of will.  
    • So leave off the seconds. Stand the movement on its edge, its the dial edge that rests on the pad ( either rubber or cork , something that wont slip ). Use a finger of your left hand to hold the movement upright,  right hand presses the release and flicks out the stem. I do it this way so i can see what I'm under a microscope. But you could hold the movement between two fingers of your left hand, its the right that has to manipulate the stem out by pushing the release and flicking out the stem with  right ring finger nail. Sounds more complicated than it actually is. I guess you could fix a push pin to something solid, then all you need to do is push the release against the pin, leaving your right hand completely free to pull the stem out.
    • Try putting everything back together and closing the back cover. I think one of the two springs has to contact the metal casing to ground the casing. So when you press the button, it will touch the contact on circuit board and close the circuit.
    • Yes, the seconds hand is the longest and goes almost to the edge of the dial. I can’t quite picture it how you do it on the rubber pad
×
×
  • Create New...