Jump to content

Another long case clock

clockboy

By clockboy
in All Things Clocks

 Share

Recommended Posts

clockboy Distinguished Member

clockboy

Posted
Posted

I have been asked to look at this long case clock apparently it has just stopped. The guy who services this clock + others has retired. I have explained I can look BUT my work shop is just to small to take on this but it will be interesting to see if I can identify the issue. 499671809_LongCaseClock.thumb.jpg.9ae3e407368c2425754cefffa63b41bc.jpg

Link to comment
Share on other sites
JimmyD WRT Addict

JimmyD

Posted
Posted

You don't need to hang the movement 7 foot off the ground just 4 foot is plenty as this would give you about 4 days of running time, then just wind it up again for another 4 days. The movements are simple so you should be able to ID the issue.

  • Like 1
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
  • Author
Posted

Ok I will be looking at it next week. I am hoping the hood it removable so I can see the movement in action. This clock is a family heirloom the guy who owns it tells be it was made in 1790. So I will have to be real careful to say the least. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Jon
      Rolex Cal 1570 Balance wheel rubbing

      By Jon · Posted

      Here's a quick Gif I made to show truing the balance using callipers. This has such a slight wobble, but is within acceptable parameters. The important thing is the balance doesn't touch or rub anything when in operation. This is an Eterna Tank. Here's a pic of the balance freshly rivetted with a new staff in the movement
    • spectre6000
      404 Club

      By spectre6000 · Posted

      I just poked an inflation calculator, and $5 in 2020 would be about $6 in 2024. Doesn't fit very neatly into any status codes, which stop at 5XX, but that's honestly somewhat arbitrary outside of a clever pun for those that dabble in such things. Back during the pandemic, I would spend a good chunk of idle time in the evenings scanning through hundreds of listings a night, and I would only land 1-2 a week max. I would often go months without finding something suitable. A very small percentage of the watches in the price range are worth pulling the trigger on for my purposes. The number floating through the thread here may be somewhat deceptive.
    • Zedster
      Balance cock stud screw

      By Zedster · Posted

      Hi, guys I got there in the end after several attempts using a screwdriver and Rodico, I couldn't wait for the tool to arrive and was getting pretty confident handling the stud screw without it flying away. At first, I was using far too much Rodico, and then realized you only need the smallest amount inside the screw slot. Putting the cock back onto the movement also helped as it gave me more to hold onto while my shaky hand tried to align the screw wobbling away at the end of the screwdriver😁 Anyway, job done and I can move on. Thanks again for all the advice it's really appreciated for a beginner. 
    • MikeEll
      The Theory of Horology

      By MikeEll · Posted

      I'd be interested in a copy of this book if anyone has one they'd like to sell  
    • nevenbekriev
      the escape wheel can't move itself

      By nevenbekriev · Posted

      You need to know at least the basics. Then the questions that You ask will begin to make sense. From what is seen on the video, the gear train and escapement look fine, but the balance doesn't rotate free. I can suppose that the thin gold colored shim that must stay under the balance cock is not in place.
×
×
  • Create New...