Jump to content

Regency 17 Jewels watch repair


Recommended Posts

Hi Folks, 

I am writing to you on behalf of a friend who doesn't use computers etc, but is quite a watch and clock collector/enthusiast. He has a Regency 17 Jewels watch, that he says something is wrong with the winding spring in it. He is looking for another watch that he can use to replace the faulty bit. He says the jeweler was unable to repair the watch without this part, which he didn't have. Pictures below. Any advice or suggestions? Kind Regards. 

Regency watch 2.jpg

Regency watch.jpg

Link to comment
Share on other sites

Thank you folks for replying  :) . My friend is going to get back in touch with the jeweler to find out exactly what the name is of the part(s) that needs replacing, is. I guess we (he) should have lead with that. Before clapping eyes on his watch's internal workings, i've barley ever worked on anything like a watch (looks pretty fascinating - tho i somehow doubt he'll let me do a maiden voyage on this watch :lol:). I apologise if i have wasted anybody's time, it was not intentional, rather a learning curve. If we do get the name of the part(s) needed, would it be ok to mention them here, and see if/where we could get it/them? 

  • Thanks 1
Link to comment
Share on other sites

No problem, No bother. do a search on the bay. vintage mens 17 jewel watch  , thousands will pop up.look through them ,you will find what you need.Alternately you could try speedtimerkollektion.I would tell you to get a whole movement that is sold as needing service. I t will be cheaper and easier than buying one piece at a time.

  • Thanks 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi everyone on my timegrapher it showing this do a make anymore adjustment someone let me know ?    
    • Maybe I'm over simplifying this and I'm a little late to the discussion, but just by my looking at oil when I use it on a treated cap jewel  the oil stays in one nice bubble, but when I don't it spreads out to the edges of the jewel. I'm not sure (but could well be wrong) but the analogy of a waxed car and rain is accurate in this case, the wax is very hydrophobic and repels the water, however, the process epilame works by is a different physical process based upon cohesion/adhesion (oleophilic) not repulsion (oleophobic)  at least as far as I have read/observed. If one were to use a oleophobic substance equivalent to wax (hydrophobic) then one would need to create a donut shape to fence in the oil, however if one used such a strategy with a epilame which is oleophilic then the oil would sit on the ring of the donut and not in the 'donut hole', exactly where you don't want it. Even if the oil is smeared then the oleophilic epilame should pull it back to the center (see diagram below). Reference
    • Looks lint the teeth on the hour wheel aren't meshing with the teeth on the calendar intermediate wheel, maybe the hour wheel is sitting on top of this instead of meshing?        
    • If the oil drop was freely standing on an epilame treated cap jewel it could easily slide off if you knocked the watch hard but the balance pivot keeps it in place. 
    • Latest 404 is this Baron which has a copy of a Seiko 66B movement in it, handy when I needed to find a replacement setting lever. Apart from the setting lever, crown, stem and new crystal (original was cracked) the watch is original. Finished result:
×
×
  • Create New...