Jump to content

See, You Leave The Door Open And Anyone Can Wander In!

FrankG
 Share

Recommended Posts

FrankG New Member

FrankG

Posted
Posted

Hello,

 

Just signed up after browsing around. I've been viewing Mark's videos and because of that, he's convinced me to have a go at stripping down and reassembling a watch.

 

Always been interested in old time pieces, though never owned many as I couldn't decide on which one to go for! But I've become re-invigorated with horology as my wife has bought me a rather nice J.W. Benson pocket watch for my up-coming 60th birthday. I wanted to find out more about what makes it tick, so to speak.

 

So I've since bought a couple of beginner books and a modest set of basic tools and have purchased a handfull of pocket watch movements (no cases) off ebay - some are just 'scrappers' for me to cut my teeth on and some are 'workers'. I plan to dissasemble each of them, practice cleaning and then reassemble. I hope that the 'workers' don't turn into 'scrappers' in the process!

 

I've also bought a nice looking hallmarked silver pocket watch, which was advertised as working but had a slight problem with the click. The test will be to see if I can clean and repair this one and then sell it on.

 

So that's my winter nights sorted out!

 

I'm an accountant by trade, but have always worked in industry. I enjoy tinkering around and have a small lathe and mill in my workshop (that's the garden shed to everyone else). I've taught myself how to use the lathe and mill, have mastered silver soldering and basic welding and after making a few knives, have had a go at back yard heat treating and tempering. I think I must be a frustrated Engineer!

 

I will be retiring soon and I'm looking for an interesting hobby that will keep me out of the way of the Boss, and I think that horology will be what I'm looking for.

 

Well, that's the end of my rambling. See you around and I'll try not to ask too many Noobie questions.

 

Take care.

 

 

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

What a cracking introduction to the forum Frank, and a very warm welcome from Scotland. Like you my horological interests kicked in when I turned sixty. I have been working at it now for three years and just love the subject. I had to laugh when you described yourself as a "frustrated Engineer", in my case I'm an "Engineer that is frustrated" !

I look forward to your contributions to the forum in the future. Any chance of posting some pictures of your Benson pocket watch?

Link to comment
Share on other sites
FrankG New Member

FrankG

Posted
  • Author
Posted

Any chance of posting some pictures of your Benson pocket watch?

 

Thank you both for the kind welcome.

I'm having to wait till January before I can get my hands on the watch, but I'll try and get some pictures uploaded of the other bits and pieces.

Pictures are much more interesting than my waffle!

Link to comment
Share on other sites
Don Super WRT Addict

Don

Posted
Posted

Hi Frank and welcome. I am new to the hobby myself. Please ask as many noob questions as you like. There are lots of nice, knowledgeable members here to answer your questions and we'll all learn something.

 

Don

Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

Hello Frank and welcome.

There are quite a few like minded folk here and a helping hand will always be extended if you post a problem that you come across with watch repairs etc.

There are a great mix of experts and amateur horologists and tinkering hobbyists like me. But be warned it is addictive, I bought three watches last week and am waiting for them to arrive every morning post.

Cheers,

Vic

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      Very useful Video

      By ManSkirtBrew · Posted

      At the lowest magnification, I can just get all of a normal wristwatch size movement in field. For some things it's too much magnification, but the nice thing about the eyepieces is they only take seconds to swap in and out. I'm genuinely surprised I've never read about anyone else doing it, to be honest.
    • watchrepairIRE
      Crown Snapped Off - Armani Renato Watch

      By watchrepairIRE · Posted

      I've attached two photographs - the watch case looks like it needs the crown to extend into the case to pick up the stem if that makes sense
    • nickelsilver
      Mainspring winder question.

      By nickelsilver · Posted

      The K&D (Levin made the same style too, probably others as well) are a clever design and work well when you get used to them. The only issue is if you wind the spring so that the tongue goes in, there's a really good chance it slips futher and then comes out  the next slot, usually breaking off. Best to size it so you can fit it in the barrel with the tongue sticking out.
    • spectre6000
      Mechatronics Engineering v Mechanical Engineering

      By spectre6000 · Posted

      I guess that's me... I work with various pumps, motors, sensors, computers, PCBs, and lots of code and chemistry. Couldn't tell you much about life with a mechatronics degree, as I've never heard the term before. My degree is in Entrepreneurship, and I bootstrapped all the technical stuff (my superpower). On the face of it, it sounds like mechatronics is the better way to go between the two, but it seems hard to imagine a mech E degree without a lot of code and electronics these days...   Whatever happened with his CS project, btw?
    • spectre6000
      404 Club Reboot

      By spectre6000 · Posted

      Totally Andy's brilliant idea. I just started the thread.  For what my opinion is worth, the number should be quite low. That's the point of it. It's as much about the hunt as the act of servicing/repairing the watches. I don't have too much of an opinion on currency, but £ has a slight edge since that's what it started with. This is a global forum, so the majority of people will be converting values no matter what. I don't know if there are any currency traders here, but if there's any currency that's especially stable or some other attribute that would benefit the game, that could be amusing. Maybe one that's super volatile? Qualification is heavily influenced by what wacky things some currency is doing on a given day (though usually that means shrinkage). We could go for something super obscure like the Chilean Peso or something just for giggles (though it might make conversion difficult). A lot of currencies are indexed to the US$, which would ease some of the conversion friction for some people. Just spitballing. My vote in the poll would be for £ inflation adjusted to £4.04 ca. 2020. I'm ticking those boxes, but I'm not sure about the 6.99. Is that £, or another currency? Source?
×
×
  • Create New...