Jump to content

British School of Watchmaking Course

KelSolaar
 Share

Recommended Posts

jdrichard Distinguished Member

jdrichard

Posted
Posted
Hi, yes, forgot to say I got a response on the 06th June. They were gracious enough to let me know about similar material online to help. 
They gave me a link to a diagrammatic reasoning test which is similar  to their logic test. And a numerical reasoning test which apparently is a little different to the numerical test but should still help.
I was also advised to spend time with fractions and rearranging formula.
As expected, they were unable to provide practice example tests.
Very happy to get such an informative response. Not least because - at best - I 'm very rusty at a lot of the above.

I have an Electrical Engineering degree and this would scare me. Don't like those written logic problems...If Jane has 2 dolls and Mary has 5 then when Mary gives Jane one doll, what is Jane's birthday.

Sent from my GT-N5110 using Tapatalk

  • Like 1
  • Haha 1
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
Posted
Hi all. I just applied for their 1,800 hour course which runs from Jan 2019.
If I get past the application stage there will be an assessment in August which will include a 'numerical and problem solving' test.
I'm not sure how to prepare for that because I'm not sure what it is exactly, so don't know how to bone-up beforehand.
The other parts of the assessment are an interview and a dexterity test, they seem self explanatory.
Anyway, aside from my worries... I'll keep you guys posted should it be of interest. I wonder how many applicants they get, seeing as they only let about 8 people on to the course. 
 

How much $ and how long

Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Knebo
      Epilame / Fixodrop

      By Knebo · Posted

      Yes, I was referring to the (jewelled) gear train with HP (most of the time, I use 1300, but when Rolex says 1000, I'll use 1000).
    • JohnR725
      Without Our Forum

      By JohnR725 · Posted

      did I miss the update of the message of something changing?      
    • JohnR725
      Epilame / Fixodrop

      By JohnR725 · Posted

      I suppose it would depend upon what your lubricating with those? for instance what does the manufacturer say about those lubricants? I have a PDF from the manufacture and a rather peculiar statement found on the bottom of the chart. my suspicion is the reason the recommending would be without epilam the HP oils like the spread except when they're in Ruby jewel's with steel pivots. tableEN lubrication 2020.pdf
    • oldhippy
      Is this a 'hack' ?

      By oldhippy · Posted

      These types of hairsprings become weak with age and very fragile. Which I expect it is that giving you trouble, and that wheel is not the correct one, if it were not bent I don't think the movement would run as the teeth are not the correct height. The problem you have is price which depends on you. It can be repaired but is it worth it to you, because there is little value in the clock. A wheel can be made and hairspring replaced. Or hang on to it and keep looking on ebay which is your best bet for replacement parts or even a complete movement but it will be like finding a needle in a haystack. 
    • Knebo
      Epilame / Fixodrop

      By Knebo · Posted

      I did that also for a few movements - well, mainly in/around the train jewels. I made big efforts to epilame the mainplate WITHOUT getting Epilame into the Pallet fork jewels (where it's not supposed to be, right?). I made litte barriers with Rodico around that jewel and used drops from a syringe to apply on the rest.  However, I've now stopped doing this. For three reasons: 1. It's a hassle and consumes more of this liquid gold. 2. I didn't see the need when using HP1000/HP1300 lubricants and grease for most part. The two places where I'd use 9010 (i.e. escape wheel and balance) receive Epilame in specific places... or the cap-jewel-setting of the balance suspends the oil sufficiently be capillary action (see my "conflict" about using Epilame on the balance jewels).  3. Lastly, and here I really wonder about yours and others' experiences: I felt that applying Epliame to the train jewels left them looking hazy (borderline dirty) compared to the (painstakingly achieved) sparkly clean results of my cleaning process. I just can't help but think that the Epilame residuals would mix with the oil and cause more friction/wear. I don't know.    simple: it'll stay there. It won't move any further. That's exactly what is happening if you epilame a cap stone. You end up placing the 9010 right on top of the epilame and the oil will sit nicely on that spot.
×
×
  • Create New...