Jump to content

Bulova

Daniel

By Daniel
in Your Watch Collection

 Share

Recommended Posts

Daniel WRT Addict

Daniel

Posted
Posted

Hello all just wanted your thoughts on this brand of watch ?I do believe it started as a American made brand but when I look at the details of the watch it says it has a Japanese movement in it . Are these watches ant good now days ? I am looking at the 96A120 .

post-331-0-35946300-1417101101_thumb.png

Link to comment
Share on other sites
WillFly Distinguished Member

WillFly

Posted
Posted (edited)

Yes, Bulova started out as an all-American brand and were bought out by Citizen in 2008. So all post-2007 movements have Japanese quartz movements in them - and some pre-2007 as well.

 

They still make great watches. I have a fairly modern Precisionist, which beats at 57,600 bph - 16 beats per second. I checked the time recently after setting it to the atomic clock two months ago - correct to the second.

Edited by WillFly
Link to comment
Share on other sites
PadraicB WRT Addict

PadraicB

Posted
Posted

I wear the black variation of that model and it's a good watch. Bulova is quite an old brand - I have a 1930 Bulova "Gladiator" which keeps good time among others. The newer models will have Japanese movements as Will mentioned, in this case the 96A120 has a Miyota movement. I haven't had mine regulated since purchase, and it runs slightly fast - ~20s per day. Nothing to complain about really for day to day use given the watch is not a hyper expensive Swiss made masterpiece ;).

Link to comment
Share on other sites
PadraicB WRT Addict

PadraicB

Posted
Posted

P.S. A new version 96A120 will not have the Bulova "horns" at the 12 O'Clock position. Retailers will have a mix of stock, but may not have updated the photos on their sites. Depending on how attached you are to the horns, you should double check with the retailer to avoid disappointment.

Link to comment
Share on other sites
Daniel WRT Addict

Daniel

Posted
  • Author
Posted

cool ty for the info .this is definitely a fine watch .I found one on ebay for a really good price .still thinking of buying some watch repair tool before I get the watch . I want to get set up to work on my watches before I start a watch collection  :D 

Link to comment
Share on other sites
PadraicB WRT Addict

PadraicB

Posted
Posted

I'm on the same journey, so I'll pass along advice to get started using cheap disposable movements for practice before attacking the Bulova ;). I'm going to start by working on a Seiko 9S26C movement (there's a free online course/tutorial for it online if you search) - you can buy one of these as part of a whole watch for very little. If you do go that route, make sure it's the "C" variant or later. Apparently the older ones have an odd philips/cross screw which may not budge for a typical screwdriver and require a specialised Seiko screwdriver. The tools starting out can be expensive but they should last a long time. I have a shopping list for hobbyists posted on the forum based on what I worked out I needed to do a complete disassembly/clean/oil/reassembly on a watch which I am hoping strikes a decent balance between cheap & quality.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • PeterS
      Stem removal after fitting hands

      By PeterS · Posted

      I see what you mean. I must admit I’m not entirely comfortable with that but I can’t see a better method than what you suggest. I’d like to see something like this mirror with a short spike: https://www.cousinsuk.com/product/mirror-for-observing-movements Place it on, push the spike on the post with one hand and release the stem with the other hand. Minor problem, it doesn’t exist.
    • Michael1962
      Leaving the forum for a while.

      By Michael1962 · Posted

      Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
    • Michael1962
      I'm going to be setting up a decent little workshop here at home.

      By Michael1962 · Posted

      Moved in. Now working out the best place to have things so moving around the room makes sense. The wooden movement testing rig may end up being suspended from the roof with some pulleys and ropes that I salvaged from some alfresco blinds that we replaced. I always seem to salvage things from things we scrap thinking, "I have an idea what I can use these for." I hope I'm not the only one that does that. My wife hates me for it. "What are you going to do with all this crap?" Anyway, here you go. If anyone has suggestions for workflow around a room, speak up. All Ideas are appreciated. The bench on wheels will carry either a laptop or my Samsung table for using with the little camera that is on the tripod for photos while dismantling etc. The small bar fridge in the corners going to have water etc in it and I might move the coffee maker from the kitchen out there as I am the only one that uses it. I want to get an ultrasonic cleaner so I may set up some sort of cleaning rig in front of the glass of the sliding door. Where the grandmother clock is currently standing. I'm hoping that I will be able to transition my working area, which is the table that the stool is sitting in front of, fairly easily between clocks and watches. I'll be doing my best to make sure that tools for each are separatedwhen stored. Logistics. I'll have a bit of wall space for being able to hang clocks if I find some that I wish to keep or hopefully at some time to be able to hang customer clocks for monitoring after servicing/repairs. The clock on the left in the blue pillow slip and the grandmother clock are earmarked for  Jarryd and his wife, Sara. He helped me move the benches in today. And then went on to tell me that ticking clocks drive him nuts. Who doesn't like the rhythmic ticking of a clock? I have a green pad for adding to the bench for a working surface. It is not a cutting mat or one of the Bergeon mats. It is actually a green desk writing mat. Was really cheap and will do exactly what I want, I think. I also have to get the sparkies back that put our new stove in to put some power points on the walls behind the benches. Hopefully this is all going to go well. I'm excited about it. It'll beat having to live out in the garage doing it. The other thing I have to do is cut a circle or square of plastic to go over the bouncing watch or clock part black hole in the middle of the floor. I would pretty much guarantee that anything that sproings off the bench would end up going straight down that drain. 😄      I think I have been on this forum about 4 years and still yet to really strike a blow. That's a bit sad isn't it. Signed up to Mark's watch course and have yet to buy the movement for working on. Have most of the tools I think I will need so now all just a matter of will.   I have to make a crank handle for my Joe Collins spring winder as well and some spring retaining tubes as I can't find where I can buy them. I will be salvaging (here I go again) the aluminium tubing from my old hang glider which I have to scrap as I can't fly anymore and it is too old to sell. All the aluminium tubing is aircraft grade so I am hoping it will be suitable for the winder. I have also been making a bushing tool and I have just worked out that it will work well with my Dremel stand. So another thing that I can turn into a working tool. Don't know if you guys have ever seen the ad about the guy that buys himself a new 4WD and the son says "We're going to need a bigger boat." So Liz is looking at all the stuff we have to get rid of and says "We're going to need a bigger bin." Really difficult to work out how big a Dempster bin we need. Sigh.
    • Neverenoughwatches
      Stem removal after fitting hands

      By Neverenoughwatches · Posted

      So leave off the seconds. Stand the movement on its edge, its the dial edge that rests on the pad ( either rubber or cork , something that wont slip ). Use a finger of your left hand to hold the movement upright,  right hand presses the release and flicks out the stem. I do it this way so i can see what I'm under a microscope. But you could hold the movement between two fingers of your left hand, its the right that has to manipulate the stem out by pushing the release and flicking out the stem with  right ring finger nail. Sounds more complicated than it actually is. I guess you could fix a push pin to something solid, then all you need to do is push the release against the pin, leaving your right hand completely free to pull the stem out.
    • HectorLooi
      Battery

      By HectorLooi · Posted

      Try putting everything back together and closing the back cover. I think one of the two springs has to contact the metal casing to ground the casing. So when you press the button, it will touch the contact on circuit board and close the circuit.
×
×
  • Create New...