Jump to content

Greetings from Brazil

sm4100

By sm4100
in Introduce Yourself Here

 Share

Recommended Posts

sm4100 New Member

sm4100

Posted
Posted

Hi,  Marco here from Santo Andre - Sao Paulo,

 I am new to horology, I have been involved with automotive mechanics for nearly 3 decades and used to repair everything at home on my own but always felt challenged by mechanical watches, so now I am very keen to develop watchmaking skills for the long term hobby/retirement job. I have already overhauled 8 watches, some old pieces just to study and develop the skills so I am still in the very first steps and will appreciate any given advice here.

 Cheers!

 

  • Like 1
Link to comment
Share on other sites
ecodec WRT Addict

ecodec

Posted
Posted

Hello Marco, Thanks for introducing yourself and welcome. I am an amateur and am still learning but if you need specific advice then there are some highly qualified and skilled people on here who will offer very good advice. Of course I will help if I can. If you do not have it already then get a copy of Practical Watch Repairing by Donald de Carle. I consider it my mentor now as my  old friend a highly skilled watchmaker of many years ago is no longer available. All good wishes to you and to Sao Paulo as well. Best regards, Mike. From UK.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HectorLooi
      Battery

      By HectorLooi · Posted

      Usually the coiled spring contacts the piezo sounder and the finger spring is the ground.
    • Waggy
      How to store one dip

      By Waggy · Posted

      So I checked with my friendly local lab supplier and they can supply the following in 2.5 lt bottles: Tetrachloroethylene (B-Dip) - approx ￡65 Trichloroethylene (one-dip) - approx ￡43 n-Heptane 99% (Essence of Renata) - approx ￡35 Hexane - approx ￡45 I can't import or buy locally the 'real' products, hence the raw chemicals above. What do you think would be my best option? I'm edging towards Trichloroethylene - I know there are greater health risks, but given the very small quantities used for each treatment and 99.99% of the time it will be sealed in a jar, I think any risk is vanishingly small? This is mainly due to its assumed superior cleaning properties, or from the experience of this group, is the extra cleaning noticeable compared to its safer alternatives?
    • Kkramme
      Blew it with a coil

      By Kkramme · Posted

      Unfortunately after much investigation, apparently the coil has been discontinued! Shall I get my service guy to try the solder or the conductive paint? 🎨 Final recommendation please🙏
    • Dmitry
      Eta 2970-1 rotor mount stops watch

      By Dmitry · Posted

      Here are the pics of the bridge. Looks correct, but as soon as I screw on the rotor, the watch stops. Video here: https://1drv.ms/v/s!ArG5E62RGctxjokY5ws85BzuJLVakA   Pics. Might have figured it out. I have been working on this watch for a while and since I got it as a non runner in a terrible shape, there was no guarantee that parts were proper. I think the main screw that was used on the rotor was too long, so it was stopping the main train. As soon as I fished out a much shorter and larger headed screw, things were good again. Please celebrate with me.  
    • KarlvonKoln
      B-Dip residue?

      By KarlvonKoln · Posted

      One-dip or naphtha should be safe, but are you sure it isn't magnetized?  I would also check that.  Although, if that balance is from an Elgin 760 0r 761, I would think it would have a hairspring of non-magnetic alloy.
×
×
  • Create New...