berniethebolt Posted August 16, 2017 Share Posted August 16, 2017 hi,i am having trouble replacing the whole balance after stripping.after finally getting the pallet fork in place i find i cannot get the balance spring up and running no matter how i try to place it.any ideas? Link to comment Share on other sites More sharing options...
noirrac1j Posted August 16, 2017 Share Posted August 16, 2017 (edited) 22 minutes ago, berniethebolt said: hi,i am having trouble replacing the whole balance after stripping.after finally getting the pallet fork in place i find i cannot get the balance spring up and running no matter how i try to place it.any ideas? I gather you had trouble putting in the pallet fork.... With the balance spring out of the way, wind the movement up a little, and with brass tweezers barely touch the end of the pallet fork: It should swing to the opposite end quickly and with no hesitation. If it does that, then make sure you place the hairspring jewel just ahead of the pallet fork. This requires a slight rotation and manipulation of the hairspring before you tighten it. Often It will immediately start running once the pivot settles in and the jewel on the balance hits the pallet fork creating the initial impulse. If that pallet fork doesn't swing freely when gently prodded with a tweezer, take it out and inspect it. P.S. Love that profile pic. JC Edited August 16, 2017 by noirrac1j typo 2 Link to comment Share on other sites More sharing options...
Chopin Posted August 16, 2017 Share Posted August 16, 2017 Before placing the balance wheel and everything try changing the position of the pallet fork. Also, when you place the balance wheel, if it won't go in as it should and if it won't rotate then it means you just have to fiddle around. When everything goes in you'll be able to tell, as noirrac1j said it'll rotate freely without any resistance, just as it should. Link to comment Share on other sites More sharing options...
berniethebolt Posted August 17, 2017 Author Share Posted August 17, 2017 ok thanks for that.will give it a try .let you know how it goes.the picture was taken in alicante,spain.it was in a shop door way and my mate and i could decide who it most looked like; we are both 70! Link to comment Share on other sites More sharing options...
Recommended Posts