Jump to content

Bezel replacement or refurbishment.


Recommended Posts

Where do you guys find generic replacement fluted bezels other than the occasional Chinese eBay seller? I'm restoring the case on an old Rado Voyager (the don't make official Rado parts for it anymore) and the chrome has flaked off the bezel in spots. I supposed I could strip it and have my chrome guy throw it in with the small parts during his next run but I would rather just buy one and save the effort. Strangely no one seems to sell them. What am I missing?

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Bezels are really hard to find for me. Tried sourcing some for a couple of modern and vintage watches and I couldn't even find anything in China/Russia.

Huh. Wow. Sounds like a market opportunity for someone. I managed to find one in stainless with the correct inside diameter on the bay though the OD and H are off a bit. But I really want a gold bezel if I can get it so I can swap the look around a bit. And I have a ton of other watches that could really use refreshed bezels. So any other ideas would help.

 

Btw here is the watch I am talking about. I haven't put the gold dial and crown on yet but I put the two tone band on to check the fit. You can see the base metal showing through the bezel if you look closely.

 

 

Sent from my iPhone using Tapatalk01f529c24e1ece74f97e87110cc79760.jpg

Link to comment
Share on other sites

Really lovely Rolex style watch. Hope you get it sorted out. And yes, I agree with you, this is indeed a business opportunity but I'm not sure whether anyone is ready to invest as I don't know how expensive the machinery to produce such parts is nor how complex it is...

I've seen other swiss watches (from obscure brands) sport the oyster style bezel but I'm not sure whether some of them might fit...

Edited by Chopin
Link to comment
Share on other sites

Really lovely Rolex style watch. Hope you get it sorted out. And yes, I agree with you, this is indeed a business opportunity but I'm not sure whether anyone is ready to invest as I don't know how expensive the machinery to produce such parts is nor how complex it is...
I've seen other swiss watches (from obscure brands) sport the oyster style bezel but I'm not sure whether some of them might fit...

That's the problem now isn't it? I can find plenty of Rolex knock off bezels but "This bezel still fit Rolex #12345" doesn't help me since the dimensions of the Rolex aren't readily available... I could buy old citizens with nice bezels all day long for $20 but I can't find the bezel and internal case dimensions elsewhere either. Definitely a hole in the parts market. Thanks for trying. [emoji106]


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

I know what you mean as I had such plans as well. It would be pretty much a trial and error type of thing. You could try and buy cheap watches with a similar bezel but who knows whether you'll even find one that matches...

Link to comment
Share on other sites

I know what you mean as I had such plans as well. It would be pretty much a trial and error type of thing. You could try and buy cheap watches with a similar bezel but who knows whether you'll even find one that matches...


Apparently the EBay bezels don't even match. I ordered one from China with in ID of 30.7mm and when it arrived it had an ID of 30.5mm. Guess I am going to have to strip and chrome it. [emoji35] So much work! Let's hope I don't bend it.


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Unfortunately fitting a bezel that is not a genuine Rolex will dramatically devalue the watch. Any keen Rolex collector or jeweller will spot the difference as the copies do not fit correctly.  Much the same as fitting generic crystals, the genuine Rolex crystals have a laser engraved Rolex crown at 6 o,clock that can only be seen with a Led light & loupe. Rolex will not service any Rolex if it finds a part that is not genuine without re-fitting the watch with the correct part. Annoying I know but this is how Rolex protects its product.

See link for the genuine Rolex authenticities

http://www.fourtane.com/fourtane-blog/rolex-authenticity-features

Link to comment
Share on other sites

Unfortunately fitting a bezel that is not a genuine Rolex will dramatically devalue the watch. Any keen Rolex collector or jeweller will spot the difference as the copies do not fit correctly.  Much the same as fitting generic crystals, the genuine Rolex crystals have a laser engraved Rolex crown at 6 o,clock that can only be seen with a Led light & loupe. Rolex will not service any Rolex if it finds a part that is not genuine without re-fitting the watch with the correct part. Annoying I know but this is how Rolex protects its product.
See link for the genuine Rolex authenticities
http://www.fourtane.com/fourtane-blog/rolex-authenticity-features

Thanks for the info Clockboy but I don't think you read the thread thoroughly. I'm fixing a number of older Swiss watches that are NOT Rolex starting with the Rado Voyager pictured above. The parts are no longer available from the official manufacturer. I have to use generic parts but can't find the correct size. But thanks for the info anyways.


Sent from my iPhone using Tapatalk
  • Like 2
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hell0 @nevenbekriev. Thank you for your advice. I have removed the old setting using my staking set--I will keep the KIF spring, since it is still good.  I am awaiting the replacement setting, and will update when I do that. In the mean time, I looked at the escape wheel and it looks ok. What do you think?    
    • Aloha All, I recently bought this Seitz tool on eBay, but it is missing some pushers reamers.  I ended up ordering new parts for those that were missing before I received the actual Seitz tool (bad idea).   Upon inspecting the pushers/bits, I noticed 23 of the 56 provided with the set had no numbers. Further inspection revealed a huge difference in the quality of those unnumbered.  Do all Seitz pushers/bits have a number on them?  I'm pretty sure that 33 of the 56 I received are cheap Chinese knockoffs.  The worst part is that I ordered $80 of parts to replace the missing pushers/bits, and now I'm looking to return the tool. I'm not crazy, right? If these are Seitz parts, they should all be numbered, correct? The first two pictures are the Seitz (numbered), and the other pictures are the suspect parts.  Will I even be able to get a refund?  Thanks, Frank     
    • It was £10 + min fee, total £16, could not leave it there. Its a Stanton A.D.2. http://stanton-instruments.co.uk/
    • Chief- The picture below shows the three parts from the dial side that are most useful to "fingerprint" a movement in conjunction with the diameter of the movement.  That's why forum participants are always asking for dial side photos in posts asking for identification.  As far as the setting lever screw, it actually sits loose in the main plate. The threads engage the setting lever below, and the elongated stem above the shoulder sticks through a hole in one of the bridge plates so that it's held captive if unscrewed all the way.  So you may be fine as far as that goes. 
    • So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
×
×
  • Create New...