Jump to content

Custom glass sourcing


skridlov

Recommended Posts

Among the items in my watch mausoleum I have this Tiffany & Co pocket watch. I don't think it's particularly interesting but with a decent lens it may be saleable. I'm trying to source a replacement or, alternatively, get a lens made. I'd appreciate a lead for UK based suppliers for either route. Any other observations about it would also be appreciated.

Roy

 

P2160068.JPG

P2160069.JPG

P2160070.JPG

Edited by skridlov
Link to comment
Share on other sites

Looks to me like its a travel type clock come pocket watch does the outer egde of the watch fold out and form a stand for placing on a bedside cabinet or the like ? could be more valuable than you think.

 

  • Like 1
Link to comment
Share on other sites

5 minutes ago, wls1971 said:

Looks to me like its a travel type clock come pocket watch does the outer egde of the watch fold out and form a stand for placing on a bedside cabinet or the like ? could be more valuable than you think.

 

You're right of course. It has a "frame" which can be folded out to use as a stand but lacks any alarm functions etc. But how to replace the glass?

Roy

Link to comment
Share on other sites

Where are you based in the U.K there is a repair shop in the birmingham jewellery quarter thats a bricks and mortar place,

https://www.creativewatch.co.uk/service-and-repairs/glass-replacement-service

All the others seem to be internet based and I wouldnt risk sending a watch to them the web sites look dodgy to me.

 

  • Like 1
Link to comment
Share on other sites

I'm in West Sussex. There are a lot of suppliers in London but it's getting more and more difficult to find skilled people who are affordable for lower-end items. I would only send the bezel for this one (although losing it would be almost as disastrous as losing the whole piece. The Post Office's "compensation" scheme ("It's NOT insurance"!) is appalling. I've written off lost items sent to Europe because of their obstruction and unhelpfulness.

Sometimes you have to take a chance.

Roy

Link to comment
Share on other sites

49 minutes ago, skridlov said:

difficult to find skilled people who are affordable for lower-end items

I woulldnt describe your watch as a low end item I can easily see this item fetching somewhere between £400-600 in a specialist auction.

Link to comment
Share on other sites

56 minutes ago, skridlov said:

The Post Office's "compensation" scheme ("It's NOT insurance"!)

I know what you mean genrally I find the post office to be very good having had only one nasty experience with them years ago I sent a Omega military watch and a Eterna sonic watch to a collector in the U.S I took out compensation on the items and got a receipt for them. The items never arrived and the Post office had no record of the items being sent, they basically went missing as soon as I handed them to the post office worker watches with a declared value of £700.00 just evaporated in his hands ( I wonder where they went ). The onus was then put on me to prove the value of the items the whole thing took about 3 months before they paid out.

Link to comment
Share on other sites

18 minutes ago, ro63rto said:

Crystalfit IS a "Bricks & Mortar" place.
Only take 2 secs and Google to tell you that

Yes it is but I didnt see them when I searched I did find one other based in a semi in whales which basically said send us your watch for an estimate and a similar one in London of course due dilligence is required when sending anywhere.

Edited by wls1971
Link to comment
Share on other sites

I got a swift and intelligent query from Crystalfit within half an hour of asking for a quote (querying the profile.) As far as I can see they're well presented.

My comment about "low end" was general, not confined to this piece, which is obviously unusual. Pretty pedestrian movement though.

Thanks for all the contributions. It's always interesting to get a few perspectives o loin g as it doesn't degenerate into an argument!

Roy

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Grateful for info regarding the nature & function of the horizontal cog and the unit it's on top of in the picture. It meshes with a vertical cog (enclosed in the unit) on the arbour which is supported at its other end by the back plate of the dial unit to which it is not quite perpendicular...
    • does anyone knows what type of battery this digital Watch takes?  
    • Hello good watch folk ,I  just fancied a light hearted discussion after my head was starting to spin over Epilame 😅. Specifically I'm meaning the sale of vintage watches, say nothing past the 1980s market. The stuff we see on ebay and other similar sites and found at carboots, curio shops etc. And are  we thinking its reaching a peak volume ?  Younger generations clearing out passed parents and grandparents possessions.  The younger folk are not as sentimental as the old fogies ( I'm now nearly at an age that i used to think was old fogie age ). When might it have started ?  i often wish i discovered the hobby much much sooner when selling your grandfathers pocket watch at a boot sale for a few quid was just a way to offload some tat. And when might it slow down. Thoughts anyone ?
    • Yes i did eventually realise that the oil will act as a barrier, I'm sure the discussion will continue. Ive had two oleophobic coffees ( added coconut ) and in the meantime i have this just delivered to take my mind off epilame for the time being. My favourite type of dial, its a beautiful looking watch traditional English made and it runs,  the ticktock is phenomenal,  i can hear it across my living room .  You wont believe how much it was. Thats interesting about synthetic oils , i thought the same, going from a 2 year service to 5 years is a big drop in income for service folk.  I expect some did well when they embraced the use of synthetic,  probably drawing in more customers than those that didn't use the new fangled substances , i bet fairly short lived though. The more frequent service makes more sense to me, not for just the service but for the regular check up inspections that might pick up impending faults. As far as epilame goes, wouldn't it be great to be able to fumigate the complete movement in a sealed jar of heated stearic acid, 🤔 now theres a thought 😅.
    • Imm going to close the discussion by attaching the photo of my super-titanium after several vicissitudes finally working. Purchased as not working I replaced the battery and for a stroke of luck I found its semi-new solar panel which, having verified its operation, seems to recharge the accumulator perfectly. I had taken this watch almost by bet, with 40 euros I brought it back to life. The initial half idea was to resell it to finance another purchase, but.. it's definitely a nice item. It would need to check the impermeability but it's a pleasure to see it on the wrist 😃
×
×
  • Create New...