Jump to content

Built like a tank....


Tmuir

Recommended Posts

For a tank, a Russian one.

I know this model of clock was used in Russian Tanks, the T-34 being the most well known one.

There is no guarantee that my clock was even in a tank, but it certainly looks like it should be.

I'm guessing it will be 3 or 4 weeks before it arrives but it will certainly be something different to work on, a bit like a giant pocket watch at a guess. I'll post some photos once it arrives. This is my early birthday present as unlike my search for an Omega watch this was within my price rang.

http://www.ebay.com.au/itm/122284142843?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Link to comment
Share on other sites

Thanks, I look forward to the photos.
 I try to make every clock I service different to my previous ones to try and expand my knowledge base and this clock is as different as they come to all the other clocks I've serviced, well within my price range and skill level anyhow.

Link to comment
Share on other sites

tmuir;   found mine,  looks  similar, BUT was sold , by russ in a plastic desk top clock mount.  the transparent case back has these #'s; 3309-51 plus serilic text.    the hands may be radioactive - don't  worry,  ill take readings on mine.  the pix. is in another watch forum.  ill try again to add it to the gallery.  cheers    vinn

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Unfortunately after much investigation, apparently the coil has been discontinued! Shall I get my service guy to try the solder or the conductive paint? 🎨 Final recommendation please🙏
    • Here are the pics of the bridge. Looks correct, but as soon as I screw on the rotor, the watch stops. Video here: https://1drv.ms/v/s!ArG5E62RGctxjokY5ws85BzuJLVakA   Pics. Might have figured it out. I have been working on this watch for a while and since I got it as a non runner in a terrible shape, there was no guarantee that parts were proper. I think the main screw that was used on the rotor was too long, so it was stopping the main train. As soon as I fished out a much shorter and larger headed screw, things were good again. Please celebrate with me.  
    • One-dip or naphtha should be safe, but are you sure it isn't magnetized?  I would also check that.  Although, if that balance is from an Elgin 760 0r 761, I would think it would have a hairspring of non-magnetic alloy.
    • Hi, Is there a spell check function available when you are posting ? Regards CJ
    • Hi John I just did a Seiko Lord-Matic a front loader without a split stem, I used a crystal lift to remove it, although I had to have it that tight I though I was going to break the lift before the crystal would budge. So I decided that the press would be a better option as I think crystals with tension rings resist a lot of compressing. I used a crystal press to repalce it and the bezel with no issues, obviuosly a different watch to the Omega. I just took my time and kept inspecting the installation progress bit by bit Regards CJ
×
×
  • Create New...