Jump to content

Cool Little pocket watch


SketchyTattoos

Recommended Posts

uploadfromtaptalk1477013863478.jpg.77057uploadfromtaptalk1477013882774.jpg.94dfb

I was wondering if anyone could provide some info on this little guy. The face reads "W. U. Special" and "swiss" across the bottom. The movement is marked with "Granges.Swiss" "1 Jewel" and "One Adjustment". I checked Google but couldn't find too much. It's in rough condition so I didn't buy it. You can actually see the escape wheel sticking out in movement picture.

Just looked like an interesting movement so I thought I'd share and see if anyone had more information on it.

Sent from my SM-G920P using Tapatalk

Link to comment
Share on other sites

Hello there Sketchy. I don't know the brand, but the movement is a Roskopf. A cursory search using that term brought up a similar movement:

https://swatchprototypes.com/roskopf-proletarian-watch/

 

I like the look of it, and I am certainly no "jeweled" snob, but the orange little caps look like plastic. I've worked on many Roskopf-style watches characterised by the pin lever escapement and the directly coupled gear on the mainspring barrel.

 

JC

Link to comment
Share on other sites

Hello there Sketchy. I don't know the brand, but the movement is a Roskopf. A cursory search using that term brought up a similar movement:

https://swatchprototypes.com/roskopf-proletarian-watch/

 

I like the look of it, and I am certainly no "jeweled" snob, but the orange little caps look like plastic. I've worked on many Roskopf-style watches characterised by the pin lever escapement and the directly coupled gear on the mainspring barrel.

 

JC



Awesome, thank you for all the info. That's a pretty cool back story on them. Definitely helpful if I decide I want another project.

Sent from my SM-G920P using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I probably will open the watch eventually and when I do I’ll post pictures of the movement. It should be possible to figure out what grade it is once I’m able to take a look at it.   Given the positional variation and the daily rates I’m seeing at full wind, it’s hard to believe it’s a top grade movement though. I’ve seen others talk about SW200-1 movements claiming very high accuracies that are often significantly better than COSC standards.
    • Hello and welcome from Leeds, England. 
    • Expat in Argentina.   Forced into "retirement" - too old, too foreign. Been watching a ton of videos and I have always loved LOVED pocket watches since I saw my first one. I might get into wrist watches - wife wants to see if I can fix her grandmother's watch, it'll be a while before I am comfortable with that.    Found an inexpensive tool kit here, not the best of tools, but starter stuff.    I am never shy about asking for help, a master in my trade - and have always learned from apprentices, zero ego.   Thanks for having me.  
    • Personally, I would be wary of re-pinning the stud and make the hairspring longer to compensate for the watch running fast, because it is more than likely the balance that has had weight taken from it when the poise screws have been shaved and removed weight from the balance which naturally will increase the timing, thus the index being all the way to one side to slow the balance down, Re-pinning the hairspring is going to change the pinning up point (where the spring passes between the regulator pins), but may also change the vibration rate of the spring slightly, which isn't the correct way to slow things down, unless it was incorrect to begin with, but to know that for sure you'll need a hairspring vibrating tool. This method will increase the timing, but I doubt it will run exactly at 18000 BPH anymore because of re-pinning the spring where it shouldn't ideally be. Adding timing washers is the way forward to alleviate this problem and slow the timing down, I believe. Having plenty excess of hairspring after the stud isn't a problem as long as it doesn't touch anything.
    • I haven't done much hairspring work but isn't the terminal curve incorrect? 
×
×
  • Create New...