Jump to content

Lathe faceplate

szbalogh

By szbalogh
in Tools & Equipment

 Share

Recommended Posts

szbalogh Super WRT Addict

szbalogh

Posted
Posted

I will need a faceplate to make modifications to a specific watch case to fit the movement or just to broaden my capabilities. It must be DIY of course :) Looking for simple designs like these:

3548559_orig.jpg6239864_orig.jpg

But it is not clear what the cranks at the outboard of the clamps are used for. Are they necessary?

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

"But it is not clear what the cranks at the outboard of the clamps are used for. Are they necessary?"

They are like small toolmakers clamps and are used for clamping thin plates.  The slots in the faceplate allow easy positioning of the clamps/job to be turned.

Link to comment
Share on other sites
szbalogh Super WRT Addict

szbalogh

Posted
  • Author
Posted
10 minutes ago, Geo said:

If you know how a toolmakers clamp works it should be self explanatory.

Hehe, i only know that it is used to turn plates and such. Never used one before.

I just think that the screws at the back are to tighten the workpiece. But those other screw??? What they do?

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

Here's one off my Boley lathe.  

You adjust the clamps until they gently grip the part that you wish to machine.  Once you have positioned the part correctly, you tighten the knurled nuts at the back of the plate to grip the part really tightly.

 

image.jpeg

image.jpeg

  • Like 1
Link to comment
Share on other sites
szbalogh Super WRT Addict

szbalogh

Posted
  • Author
Posted
11 hours ago, Geo said:

Here's one off my Boley lathe.  

You adjust the clamps until they gently grip the part that you wish to machine.  Once you have positioned the part correctly, you tighten the knurled nuts at the back of the plate to grip the part really tightly.

AAhhhhhh!  Now i got it :) That nut at the front is to adjust the clamp to the workpiece thickness, that the clamp will stay parallel to the faceplate! Thank You for the excellent pictures. Now i can see that spring as well. :woohoo-jumping-smiley-emoticon:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Mechatronics Engineering v Mechanical Engineering

      By RichardHarris123 · Posted

      @HectorLooimakes an excellent point, the degree should be brilliant and more than useful but if it's not recognised, then the job options are limited.  You need to find out how many companies are willing to accept Mechrotronics. 
    • watchweasol
      ETA 9362 check electronic module

      By watchweasol · Posted

      Hi other than testing the coil without the proper tools it will be difficult.  If you +an rig up an external supply and attach it to the cut block you may be able to pick up the pulses on the chip if not on the coil. i have attached the parts sheet for the watch 9362 which gives you the part number of the cut board assembly, whether this part is still available or not , who knows. ETA 9360, 9361, 9362.pdf
    • nevenbekriev
      Hamilton Khaki Mechanical / H-50 winding issues

      By nevenbekriev · Posted

      Hi and welcome. First of all, check the power reserve. If the watch is runing, this means the spring is attached to the barrel arbor. If there is no end of winding, this probably means that the spring is not attached to the barreland it's outer end is slipping. In such case, the watch will run, but the power reserve will be small - about several hours
    • watchweasol
      Hamilton Khaki Mechanical / H-50 winding issues

      By watchweasol · Posted

      Hi welcome to the forum. One can only reiterate the diagnosis already made by clockboy mainspring problem. But before tearing it to pieces take a little time to read the attached file to acquaint yourself with all the various parts. TZIllustratedGlossary.pdf
    • Geotex
      B-Dip residue?

      By Geotex · Posted

      We think about these preps as "one-dips" partly because they are terrific solvents but also because the parts they are used on are often cleaner in general than many other parts. But old oils petrify, and even something like B-Dip can't clean up over-soiled parts without some extra effort, as mentioned above. There is an intermediate step during cleaning where the solvent can partially dissolve tarry residues so they have a more liquid varnish-like consistency, and that could well be what you are seeing on the coils after two washes. I wouldn't worry that your B-Dip was contaminated before you used it on this hairspring, but it I wouldn't re-use that aliquot AFTER this cleaning!
×
×
  • Create New...