Jump to content

HMT Part Needed


Recommended Posts

Bit of a long shot this but does anyone have a Pallet Fork for an HMT manual wind Watch? it has a Citizen 0201 based movement

see this

http://17jewels.info/movements-en/movements-c-en/movements-c-citizen-en/413-citizen-0201.html

Also need the the top balance shock jewel as mine went ping.

These Watches don't command huge ammounts of money very little infact but I enjoy getting them going as they make good practice for a novice so any help would be appreciated.

Thank you and regards from Jon.

P.S

At some point I plan to do post on strip down and rebuild.

 

  • Like 1
Link to comment
Share on other sites

17 hours ago, szbalogh said:

You can get one on E-bay from India with auction for really cheap if You can wait the shipping time. Or there are movement lots sold as well by indian sellers. 

 

Thanks but it seems a shame to buy one that works but some things have to be.

Link to comment
Share on other sites

I have an actual HMT part you could have and I have a bunch of Caravelle 11dp (same as Citizen 0201). Let me know if your still looking and I'll pick a nice one out of my parts drawer.

Sent from my Nexus 7 using Tapatalk

  • Like 1
Link to comment
Share on other sites

On 20/06/2016 at 3:43 PM, Tudor405 said:

Hi

      I have the parts you need plus -a complete movement less setting lever spring-and various other parts including a good balance  I can stick them in the post if it will help

Really kind of you will send PM.

Link to comment
Share on other sites

On 20/06/2016 at 2:08 AM, Don said:

I have an actual HMT part you could have and I have a bunch of Caravelle 11dp (same as Citizen 0201). Let me know if your still looking and I'll pick a nice one out of my parts drawer.

Sent from my Nexus 7 using Tapatalk

Very kind offer I have accepted Tudor405's offer but will contact you if I get stuck.:bow:

  • Like 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Couple of Oris in there , early Oris were pretty small , around 28mm , the first 2 could be 45x or 49x series calibers. The Unicorn might also be an Oris, to know that these will be pin pallet watches if there is no jewel count on the dial. The other 3 will be much the same. The Oris are ok and have some value, as far as pin pallets go Oris were very good as thats all they were allowed to work with for a long time, so they made sure they got the best out of them. Its good to inside though, at the most basic level of inspection of an Ebay sale at least you can see if anything is missing inside, otherwise its just pure luck. Ask the sell if he will add some pictures of the insde for you to privately look at.
    • What I've found with Facebook groups and yes i am in a few , its good to have more than one source of information on specialised areas such as lathe restoration or just military watches etc. They dont have the same ethics that we have here, we all seem to look out for each other here, a good close knit group that encourage new members and each other daily. We have a laugh sometimes and really help each other out and support each other. All the support i received about my mum was so kind, i wouldn't have got that anywhere else. A lot of these facebook groups are full of aholes and sarcastic gate keepers. I consider our forum to be very unique, but the subject of # if it ever Dissappears # honestly i think does need addressing . We're really just after a connection site Michael not a full function chat group. Just a way to re-connect if something happens. But the other big thing is all the stored information how that can remain accessible. 
    • Facebook is a big NO from me. I have nothing to do with any of these sorts of places. 
    • I for one would have to pass, I'm not joining Facebook. 
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement.  This might be helpful for you.  704789946_TZIllustratedGlossary(2).pdf
×
×
  • Create New...