Jump to content

Flush cutters

dadistic

By dadistic
in Tools & Equipment

 Share

Recommended Posts

dadistic Distinguished Member

dadistic

Posted
Posted

I'd like to buy a pair of flush cutters, something to use for trimming stems and case clamps, etc. Does anyone have any recommendations, either general type or specific brand? I don't want to have to buy a bunch trying to figure out what does and doesn't work. Willing to invest in a good one, if I can figure out what "good" means :-)

Thanks!

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

You can't go wrong with bergeon all though the pair I  still have are Lindstrom, but there nothing like the ones you get today mine must be about 60 years old. If you buy a good pair they will last you a lifetime. A cheap pair and the edge will soon go and you won't anything. Box joined ones are the best because they don't twist out of shape. 

Link to comment
Share on other sites
dadistic Distinguished Member

dadistic

Posted
  • Author
Posted

Thanks oldhippy, that helps narrow the field, but still leaves quite a lot of choices. I've noticed that a lot of cutters are specified as used for cutting soft to medium wires, I'm guessing that stems would be considered "hard", and these wouldn't be suitable. Some of the cutters have tungsten carbide jaws, perhaps better for stems? Am I on the right track?

Thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mikepilk
      AS 1475 REFURBISH (Recalled to life)

      By mikepilk · Posted

      I've just finished refurbishing a Memostar Alarm with AS 1931 movement (same as 1945 but with date and running at 21600). I was also surprised how many parts are available at Cousins. Like you, I was missing the alarm stem (Cousins stock them) and I needed new crowns. It's a nice simple movement for an alarm, easier to service than a Seiko Bell-Matic. BTW I made a note in my Servicing spreadsheet: "Pull out winding stem before removal".  It may have just been wear on my movement, but I found that the yoke could move out of the clutch if the stem was removed in the normal position (like some ETAs).  You might find this interesting     
    • LittleWatchShop
      AS 1475 REFURBISH (Recalled to life)

      By LittleWatchShop · Posted

      I picked up this alarm watch at a flea market several months ago and recently decided to investigate.  I am not finished, but well on my way. As you can see, there was significant water damage.  Running these parts through my L&R cleaner was not enough to clean them, so I did manual cleaning with one-dip and cotton swab (the dense pointed kind).  The wig-wag was stubborn--the two gears would not release from the plate.  I soaked it in Kroil overnight and that did the trick. There was some rust on the balance staff, but not actually on the pivots themselves.  Nevertheless, I chucked it a step-chuck on my lathe and burnished the pivots. The watch is running and I have confirmed that the alarm drive train is functioning.  Since I am missing a stem for the alarm, I have not done the final assemble of the alarm components.  Surprisingly, there are lots of parts available for this movement on Cousins.  I will probably get a couple of stems and maybe some other parts that I deem necessary. The watch is running at weak amplitude (about 190) and shows some poising issues.  I will work on that. The last two pictures are after partial reassembly.    
    • watchweasol
      Greetings from India.

      By watchweasol · Posted

      Hello and welcome to the forum.    Enjoy
    • Knebo
      DIY centre seconds support base

      By Knebo · Posted

      Exactly!  It may not really be a joke, but the actual truth.
    • HectorLooi
      DIY centre seconds support base

      By HectorLooi · Posted

      The movement is placed on the base and the centre screw is raised until it contacts and supports the centre pinion, thus stopping the centre pinion from sinking in when the second hand is pressed on.
×
×
  • Create New...