Jump to content

Guess the X-Ray :-)

CHRGDR
 Share

Recommended Posts

CHRGDR New Member

CHRGDR

Posted
Posted

Hey folks!

I was in the radiology department when the X-Ray machine needed to make some test-scans for routine calibration. The technician jokingly asked if I had something I wanted an X-Ray of ... so naturally I handed him my watch. Can you guess the watch I wore by the scan?

IMG_8990.jpeg

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
On 2/9/2024 at 8:19 AM, CHRGDR said:

X-Ray machine

In addition to x-rays does the machine have a byproduct of magnetic fields? Yes I know a better test for your watch would be with the MRI machine but what sort of magnetic fields does the x-ray machine produce and did it affect the timekeeping of the watch?

Link to comment
Share on other sites
CHRGDR New Member

CHRGDR

Posted
  • Author
Posted
On 2/11/2024 at 11:59 AM, JohnR725 said:

In addition to x-rays does the machine have a byproduct of magnetic fields? Yes I know a better test for your watch would be with the MRI machine but what sort of magnetic fields does the x-ray machine produce and did it affect the timekeeping of the watch?

As far as I know an x-ray machine does not produce a significant magnetic field nor is it influenced by one. I am no expert on this matter however, so I might be wrong. I have not noticed any negative effects on timekeeping yet. I probably would not have done this with any of my older, more delicate watches though.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Mechatronics Engineering v Mechanical Engineering

      By RichardHarris123 · Posted

      @HectorLooimakes an excellent point, the degree should be brilliant and more than useful but if it's not recognised, then the job options are limited.  You need to find out how many companies are willing to accept Mechrotronics. 
    • watchweasol
      ETA 9362 check electronic module

      By watchweasol · Posted

      Hi other than testing the coil without the proper tools it will be difficult.  If you +an rig up an external supply and attach it to the cut block you may be able to pick up the pulses on the chip if not on the coil. i have attached the parts sheet for the watch 9362 which gives you the part number of the cut board assembly, whether this part is still available or not , who knows. ETA 9360, 9361, 9362.pdf
    • nevenbekriev
      Hamilton Khaki Mechanical / H-50 winding issues

      By nevenbekriev · Posted

      Hi and welcome. First of all, check the power reserve. If the watch is runing, this means the spring is attached to the barrel arbor. If there is no end of winding, this probably means that the spring is not attached to the barreland it's outer end is slipping. In such case, the watch will run, but the power reserve will be small - about several hours
    • watchweasol
      Hamilton Khaki Mechanical / H-50 winding issues

      By watchweasol · Posted

      Hi welcome to the forum. One can only reiterate the diagnosis already made by clockboy mainspring problem. But before tearing it to pieces take a little time to read the attached file to acquaint yourself with all the various parts. TZIllustratedGlossary.pdf
    • Geotex
      B-Dip residue?

      By Geotex · Posted

      We think about these preps as "one-dips" partly because they are terrific solvents but also because the parts they are used on are often cleaner in general than many other parts. But old oils petrify, and even something like B-Dip can't clean up over-soiled parts without some extra effort, as mentioned above. There is an intermediate step during cleaning where the solvent can partially dissolve tarry residues so they have a more liquid varnish-like consistency, and that could well be what you are seeing on the coils after two washes. I wouldn't worry that your B-Dip was contaminated before you used it on this hairspring, but it I wouldn't re-use that aliquot AFTER this cleaning!
×
×
  • Create New...