Jump to content

Accutron 2210


Recommended Posts

Although I was trying to be good and not purchase anything till I had sorted out the multitude of watches I have in the queue, I saw this Accutron on the bay and bought it for £32.49 plus about $5 postage to my sons place in LA.

 

post-197-0-81818600-1442312171_thumb.jpg

 

post-197-0-07744900-1442312198_thumb.jpg

 

post-197-0-58803200-1442312234_thumb.jpg

 

post-197-0-44651800-1442312305_thumb.jpg

 

I had not got an Accutron 2210 up to this point in time, and to be honest the movement does not have a particularly good rep for reliability.  However, the parts are comparitively cheap compared to the 214 and 218 and through a quirk of fate I have quite a few NOS 2210 parts that were amongst a job lot of 214 and 218 bits I bought some time ago.

 

It is a 1973 movement and coincidentally that is when these were first produced and the movement is quite small, being used in lots of ladies watches which do not command the same prices as the mens accutrons - good for getting parts.  I queried with the vendor the size and was advised it is 34mm excluding the crown so it is in a mans case.

 

Condition was described as "Awesome" but I will settle for reasonably good seeing it is over 40 years old, there are some scratches on the glass and I deduce from the back that the case is gold plated which is difficult to tell from the photos, but I will take what comes.

 

It will be a while until it is sent over to me along with some 218 coils I took a punt on but I look forward to seeing it.

 

Was not going to buy any more repair jobs but I weakened, however, I am definitely back on the wagon for a while.

 

Cheers,

 

Vic

 

 

  • Like 3
Link to comment
Share on other sites

  • 1 month later...

Got the watch and the condition is indeed good. It's a nice steel case.

Took out the battery and it is dead so I have sent off for a couple of Renatas. I have a compatible one but it is off one of those sheets of batteries you get for a pound and I resisted the urge to try it out. Hopefully in a couple of days time the new ones will be here and who knows.

Cheers,

Vic

Link to comment
Share on other sites

And some you win !

The engine room is fully functional George with a new battery inserted and would you believe the pointers are moving as well.

There is a slight blemish to the left of the tuning fork insignia but I have decided to leave it alone for now and just check the accuracy is ok. The Vendor has put a new brown seiko calfskin strap on it which, though not quite right for the SS watch will also do for now.

So I have a fully functional Accutron 2210 - total cost £38.00 which will do for me - question is - will I ever sell it on (wife laughs in the background) - OK probably not.

Cheers,

Vic

Link to comment
Share on other sites

Just an addendum.  On the original photo above it looks like there are black dots on the pointers, in fact there are no black dots anywhere, it must have been mucky when they took the photo - bonus.

Could one of the inimitable moderators put an "i" in pointers above - a small thing I know but it irritates me :cool:

 

Cheers,

 

Vic

Link to comment
Share on other sites

Could one of the inimitable moderators put an "i" in pointers above - a small thing I know but it irritates me

Done!

question is - will I ever sell it on (wife laughs in the background) - OK probably not.

If your like me, probably not.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I think we are about there, if there were still lots out there then the cost of a watch from 5 years ago would be around the same as it is now (allowing for inflation). Given that the price has gone up several times over we can only assume that supply cannot keep up with demand so we must be at or past peak supply, especially if the trend continues. I see even places like Australia, Ukraine and even South America are selling watches on eBay, picking over their stocks, mixed in with fakes and Frankenwatches etc.
    • I understand the demand bit, the generation below me 30ish are too technology engrossed to own a mechanical watch and they just dont like old stuff. I also consider myself at the getting on age of 57 to be a rare find of someone that likes old stuff, i did buy an almost 100 year old book yesterday titled " The New Modern Home " printed 1929.  Cost me a quid. What i was trying to work out is if we have reached a volume peak of watches being discovered hidden in the back of drawers.  Those watches that were hung onto until they entered the hands of the non sentimental generation. 
    • Even for myself who only started getting into watch repair/servicing during COVID I have seen a huge jump in watch prices - we have a 404 channel on this forum. When I started you could relatively easily find a watch on eBay to restore and put onto the channel, however this is now almost impossible and the only feasible solution is to buy a job lot with an average price <4.04. Even watches sold for parts/spares are 3 or four times the price of only a few years ago. Why - Either Demand must have increased in order to push up the price, or supply is reduced. I think it is a little of both, I think that most watches in the UK/US may have been picked over, which agrees with most of what @Neverenoughwatches says so supply of all kinds of vintage watches, including tat is dwindling. As a double whammy I think that more people are wanting watches, either to work on, or as a way to differentiate themselves from the Apple Watch and FitBit crowd. The upshot is that half decent watches that require restoration are now $500 instead of $100 and cheaper watches (Seiko 5 etc) are now $50 instead of $10, and even Mumbai Specials and garbage are now pushing $50 each. When - how long will this last, I think that most of the people who are returning to mechanical watches are those that have previously experienced life without them and want to return to something with a bit of personality that doesn't buzz every 10 seconds on your wrist and tell you how many steps you have done today. i.e. the 30-40+ generation. My son who is 17 has several mechanical watches but only wears one on a special occasion and is obviously only aware of them at all in part due to my hobby. I asked him the other day how many of his friends wear a watch and he told me that some use a smart watch but most just use their phones. So as I see it, demand will start to fall once the sub-thirty crowd start becoming the majority and/or the older amongst us stop buying watches and switch our attention to mobility scooters and trying to remember our bank password. Price - I think this is here to stay, even if demand does start to drop as the older generation becomes to decrepit and stops buying and the younger generation isn't interested in buying, supply will become progressively less as time goes on as more vintage watches become lost or broken beyond repair. I think the prices will plateau at some point as an equilibrium is reached as reduced demand is balanced with reduced supply, i.e. less and less people buying less and less watches. Sorry for the long ramble!
    • Hi. Use a PVA based glue, gorilla glue it dries transparent then do as advised by Old Hippy, smoothe down using very fine  0000 wire wool and either French polish or beeswax for a finish.
    • Hello and welcome to the forum.    Enjoy
×
×
  • Create New...