Jump to content

The Omega Spirate

clockboy
 Share

Recommended Posts

clockboy Distinguished Member

clockboy

Posted
Posted (edited)

Its not very often in horology a truly new concept arrives Omega seem to have achieved it.
 

The Omega Spirate is a new balance spring system that can be adjusted for stiffness to allow fine adiustments of the rate to within 0.1 seconds per day. This is one of the few truly new ideas in horology made possible by silicon manufacturing techniques.

The system was announced in January this year.

However, technical details were sparse, with Omega supplying only basic images of the spring and views of the watch into which it's installed, the new Speedmaster Super Racing. Recently Omega invited the H7 to a technical conference on the Spirate from which this exclusive report has been prepared.

 

The Spirate has at its core a flat balance spring with unusual features, depicted in Figure 1. The body of the spring proper terminates at a flexible flat blade rather than at a more usual stud. The whole arrangement is in turn fixed to a stud by means of the short arm pointing to the right.

The general principle is this: the overall 'stiffness' of this balance spring is a combination of the stiffness of the spiral part and the stiffness of the blade. This overall stiffness directly affects the oscillator's period, (the rate of the watch). By subtly altering the stiffness of that short blade, the watch rate can be adjusted extremely finely.

 

See Pics: 

IMG_9922.jpeg

IMG_9923.jpeg

Edited by clockboy
  • Like 1
  • Thanks 1
watchweasol Distinguished Member

watchweasol

Posted
Posted

There is no end to modern technology they are always managing to re invent the wheel. Another step in the 

Horological evoloutinary saga. The use of modern plastics and silicones in Clocks and watches continues. Luddites beware.

  • Like 1
clockboy Distinguished Member

clockboy

Posted
  • Author
Posted

The claim that a rate is achievable to within 0.1 seconds per day is remarkable. Who would have thought a mechanical watch movement could be as accurate as a Quartz movement. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ekraus50
      Luminox 7050

      By ekraus50 · Posted

    • LittleWatchShop
      Looking to try servicing an old movement

      By LittleWatchShop · Posted

      The War Department recommends Elgin M-56A oil.  Elgin later came out with M-56B which is better.  You will find the Elgin M-56B in cool "one-drop" bottles on ebay for under $20.  Get one and discipline yourself not to read any threads on "what oil should I buy." Get a brand new set of Bergeon screwdrivers They are not that expensive. Get a pair of Dumont #3 tweezers.  If you were a boy scout and no how to sharpen a knife, find a pair of Dumont #3 on ebay that is in reasonably good shape and buy them--they are better.  Then dress them with a stone using your boy-scout skills. Once you become a skilled amateur, you will be confident to invest several thousand dollars in the 14 different Mobius oils that the experts recommend (SARC).   I would not practice on the Ingersoll for two reasons: 1) it is constructed a little different than your typical Swiss watch, and 2) (more importantly) it is a very cool watch!  Later on, I would fix it and wear it.
    • mikepilk
      Omega 26.5T3 alternative hairsprings ?

      By mikepilk · Posted

      Cousins sell collets and fixing pins.  https://www.cousinsuk.com/category/hairspring-collets-pins-studs-boots
    • Nucejoe
      Looking to try servicing an old movement

      By Nucejoe · Posted

      Welcome to the WRT forum.   Both pieces are worth TLC, they don't make them like these anymore, so you are looking at a limited available quantity. I suggest working on them when you have acquired good dexterity and experience.  Chinese keep making same chunk= junk and  love to see you break them, so to sell you another one, the fact that  they don't sell spare parts supports the point of my arguement.   If you are buying now, why not buy two Swiss scraps of the SAME CALIBER in need of repair, such that a good running one can be made out of the two, plus,  you will have your own spare parts inventory, well sorta. Keep us posted when choosing scraps  and ask questions, no $  charge for advice.  No shortage of help and advice here, we'll work with you till your rebuild one ticks happy and accurate. Regs        
    • watchweasol
      Looking to try servicing an old movement

      By watchweasol · Posted

      Hello welcome to the forum.   I have added a couple of documents you may find worth reading TZIllustratedGlossary.pdf TM 9-1575.pdf
×
×
  • Create New...