Jump to content

Hi Folks. Another Newbie!

Tippex

By Tippex
in Introduce Yourself Here

 Share

Recommended Posts

Tippex New Member

Tippex

Posted
Posted

I appreciate being allowed to join this forum. Thank you. I've always had an interest in watches but didn't start collecting until I retired about 15 years ago. Most of them are Seiko's of course but occasionaly treat myself to something more expensive. For the last few years I have started collecting older watches. These generally require some work and I am slowly building up my knowledge and collection of tools. The thrill of the chase for some long obsolete part is definately part of the attraction. I can't imagine being able to do this without the internet! I've just finished rebuilding a Seiko 7A28-7040 with new coils, pusher seals and springs, crystal and gaskets. Am really pleased with the result. The pusher seals were a pain but with the use of a tooth pick and a spring bar tube I managed it. I very much enjoy working out how to do something though sites like this are invaluable. I hope I can assist with my limited knowledge. Best wishes.

PS: Apologies for the naff username but it was the first thing that caught my eye.:)

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • AndyGSi
      Reusing mainsprings in an automatic and slipping

      By AndyGSi · Posted

      The idler gear I'm referring too is the one between the 2 barrel wheels. These movements just rely on the spring slipping to prevent over winding.
    • EtherJunky
      Tip and tricks here.

      By EtherJunky · Posted

      Not sure how useful this might be, but a while back I bought some bamboo tweezers (multipack with a ridiculous amount of them in) and have been using them in place of pegwood. Seems to be working just fine
    • JohnL
      Reusing mainsprings in an automatic and slipping

      By JohnL · Posted

      Ah, well there is the rub. I ordered a post and oscillating weight, but clicked on the wrong thing when adding the weight to the basket adding an automatic bridge. Ordered a weight, and it's somewhere in the ether after our customs and excise folks rejected it because of the documentation.  Yes, both springs inserted the same. "Is the idler gear ok", and here's why I posted to the newbie area: So, reading between the lines, and again correct me if I'm wrong here, the automatic winding mechanism will have an ideler gear, along with the reverse wheels, that prevents over-winding? There is nothing (that I'm aware of) between the crown pinion, crown wheel, and the ratchet wheels to prevent over-winding other than the mainsprings slipping in the barrels.  This is only the second automatic I've worked on. The other, a Vostok, had a very obvious mechanism.  I shall look at the automatic winding mechanism in a bit more detail when I've a bit more time. At the moment I'm taking a glance here now and then when work is dragging 😉 As ever, thank you for your help. Always appreciated.  
    • AndyGSi
      Reusing mainsprings in an automatic and slipping

      By AndyGSi · Posted

      If the weight was worn how does the post look as normally you'd have to replace both. There should be no real resistance at the end and just be able to keep on winding. Did you insert both springs the same and is the idler gear OK.
    • JohnL
      Reusing mainsprings in an automatic and slipping

      By JohnL · Posted

      Assembled and running well, I'm asking after the fact. I'm waiting on a new oscillating weight as this one was worn (they have a reputation for it apparently, no bearings). So I've been winding it by hand, but meeting quite a bit of resistance at the end, more than I think an automatic weight will overcome. It's not quite as sudden as a manual mechanism, but there's very little in it, certainly enough that I would be concerned about breaking something if I continued.
×
×
  • Create New...