Jump to content

avia 15 jewel AS1002

jthing
 Share

Recommended Posts

jthing Member

jthing

Posted
  • Author
Posted
8 minutes ago, RichardHarris123 said:

Your welcome.  I general oiling one movement is the same as oiling other movements, unless it's something special.  Light oil for fast moving parts and heavier oil for slow moving parts. 

thanks again. i have a list that i have used in the past. also been reading info on oil on here to get the latest info..

Link to comment
Share on other sites
Marc Distinguished Member

Marc

Posted
Posted (edited)

AS984 / 1002 is a nice basic sub-seconds time only manual wind movement so about as uncomplicated as it gets. You're highly unlikely to find a service manual for it but all you need to do is to follow a logical system of work, work slowly, don't force anything, and take pictures of every step of the strip down as reference for when you put it back together. Also make sure you let down the power before you start, and it's good practice to remove the balance cock and balance and put it somewhere safe at the start of the works, that way it's less likely to be damaged.

One thing to note (and I have just checked this on a 984 in my parts stash) is that both the crown wheel screw and the ratchet wheel screw are reverse (left hand) threaded, so turn clockwise to undo. Otherwise there should be no real surprises.

I have attached a copy of the BHI guide to lubrication which should be more than adequate for your movement and is a good starting point for most clocks and watches in the absence of anything more specific.

If you get stuck on anything just ask on here.

BTI-The_Practical_Lubrication_of_Clocks_and_Watches.pdf

Edited by Marc
typo, I think I may need new batteries in my keyboard :-)
  • Like 1
Link to comment
Share on other sites
Swan Member

Swan

Posted
Posted

Let me know how you get on! I have (I think) the same movement in a Timor WWW that's next in line on my bench. I think as Marc says, hopefully pretty straighforward. Have you folloed Mark's courses on watchfix.com? I think with the knowledge there, you should be good to go. 

  • Like 1
Link to comment
Share on other sites
jthing Member

jthing

Posted
  • Author
Posted
8 minutes ago, Swan said:

Let me know how you get on! I have (I think) the same movement in a Timor WWW that's next in line on my bench. I think as Marc says, hopefully pretty straighforward. Have you folloed Mark's courses on watchfix.com? I think with the knowledge there, you should be good to go. 

I have watched a quite a few of his videos. Also worked on Seiko auto's. Citizen & walthan. Not done any for a year or two. But when I have time. Would like to do more!

1 hour ago, Marc said:

AS984 / 1002 is a nice basic sub-seconds time only manual wind movement so about as uncomplicated as it gets. You're highly unlikely to find a service manual for it but all you need to do is to follow a logical system of work, work slowly, don't force anything, and take pictures of every step of the strip down as reference for when you put it back together. Also make sure you let down the power before you start, and it's good practice to remove the balance cock and balance and put it somewhere safe at the start of the works, that way it's less likely to be damaged.

One thing to note (and I have just checked this on a 984 in my parts stash) is that both the crown wheel screw and the ratchet wheel screw are reverse (left hand) threaded, so turn clockwise to undo. Otherwise there should be no real surprises.

I have attached a copy of the BHI guide to lubrication which should be more than adequate for your movement and is a good starting point for most clocks and watches in the absence of anything more specific.

If you get stuck on anything just ask on here.

BTI-The_Practical_Lubrication_of_Clocks_and_Watches.pdfUnavailable

Thanks Marc. Very helpful.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      No that has never been the intention John, why give up something that ticks all the boxes ? all its about is having a backup plan. The inactive site will just sit there as a back until needed, where members  reside, a bit like a safe house.
    • tomh207
      Without Our Forum

      By tomh207 · Posted

      There is no real alternative to this wonderful site, John is 100% correct in his summation.   Tom
    • JohnR725
      Without Our Forum

      By JohnR725 · Posted

      The problem is there are no good Solutions. What we really need is a backup for Mark. In other words somebody willing to step up and take his job if for some unknown reason he is unable to continue. Not really an inactive site because if you have an inactive site then why don't we just have an active site instead of run by Mark run by a group? Yes this is the problem with this discussion do we want to take this away from Mark and start our own group? As I said there are no good Solutions and unfortunately with the Internet is everything goes away sooner or later including discussion groups they never last forever. The problem would be even if you collected everyone's email address what would you do if the group was gone? As far as websites go they're insanely cheap to make and set up and have especially if all its only purpose is a place to go in an emergency where it would have a emergency email address to reach out or updates could be posted in case of an emergency. Kind of like a civil emergency you're supposed to go someplace this would be our civil emergency website just in case the unthinkable happens. Otherwise somebody sets up an email address for emergencies you can contact us here. Oh I have a question at least for the people in the UK that are so incredibly concerned about reaching out and contacting each other why don't you just form a physical group that gets together from time to time?    
    • Neverenoughwatches
      Questions about my Bravingtons Renown Mantel Clock

      By Neverenoughwatches · Posted

      Looks great Michael,  just the combination of a damp cloth and iron perplexed me 😅.  Steam will swell the veneer and soften any adhesive underneath. Its amazing what you can do with a little glue, filler and refinishing, good job matey 👍
    • watchweasol
      Newbie from Nova Scotia

      By watchweasol · Posted

      Hello and welcome to the forum attached a bit of reading for you TZIllustratedGlossary.pdf
×
×
  • Create New...