Jump to content

How would you remove this kind of link please?

Blubarb
 Share

Recommended Posts

watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi normally with such bracelets there are four pins which push out at either side of the bracelet clasp. They can be punched out but there are cheap tools available for pressing them out. Have a look at the inside of the bracelet for arrows on the links which indicate the direction of removal.   

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Knebo
      Rolex cal. 3135 issues

      By Knebo · Posted

      Ohhh, hahaha, yea, I thought you were complaining that I didn't quote you.  Well, I'm relieved that you're happy with me and quoting ME! That's truly exciting 😉
    • nevenbekriev
      Hamilton PW balance stoppage

      By nevenbekriev · Posted

      Hi Arron, The hairspring looks pritty normal seen from above. May be You don't know how to fix the studd to the cock. See, this kind of studd carrier alows the studd to be placed to a different distance from the stone. So You don't need to pres the studd as much to the stone as it can, but let the spring take it's natural shape an only then tighten the screws of the carrier. Of course, if the radius of the overcoil is wrong, this will not help to make the spring stay as it should, but I doubt that You didn't do the things like as I just described. The stoppng may be caused by different reasons. Yes, it can be pivot/stones problem, and it can be hairspring too. Of course, another possible reasons exist, like balance rubbing on the center wheel... You need to make some checks to see what is wrong. I will advice first to remove all from the plate and leave only the balance assembly with it's cock. Then make free oscillations test in both horizontal positions and see what happens. Then, if the problem still there, remove the hairspring and put the balance only with the cock, then make balance turn and observe how it stops in both positions, if there is difference, and write here.
    • ManSkirtBrew
      Picked up on a whim: Arnex 17 jewel pocket watch with Unitas 6498 movement

      By ManSkirtBrew · Posted

      Finally got the mainspring in and I am pleased with these results.   The case came up pretty nicely, too. Especially that inside cover. I'm assuming it's highly polished stainless, but it's so shiny if I didn't know better I'd say it's silver. I found an antique silver fob to complete the look.   And yes, I noticed the cat hair under the crystal and popped it back off.  
    • mbwatch
      Questions about K&D staking set

      By mbwatch · Posted

      Well well. I looked closely at the nut and it looks like it had the thin interior friction spring @LittleWatchShop mentioned but the part is broken. So that's why I can't get more friction, but the thing is still an eccentric and is helpful especially to align with an inverted stake used as a stump.
    • rptr
      Seal Ring for Casio W35 Marlin

      By rptr · Posted

      I am having some trouble learning how your website works.  I couldn't get any text in with the pictures.  Some of the pictures look a little brown, rusty.  Actually they are all bright steel.  The color is some artifact I didn't have time to figure out the cause.  I hadn't used my camera for several years so the battery was down.  I may have lost some settings.
×
×
  • Create New...