Jump to content

Bought a hilarious feiko frankenwatch


Recommended Posts

Still working on my collection of cheap watches to tinker with and came across this.... watch... on ebay. For the price I just couldn't pass it up.

A "vintage" Seiko 5.

Crown at 3 o'clock.

Hands with lume that doesn't match the dial lume (does the dial have lume? Another mystery!)

Square dial in oval case.

Exhibition back for.. some.. reason?

Fake dial that is either misprinted slightly off center or has broken dial feet (or both!).

Unreadable movement number unfortunately.

It's gonna take about 6 weeks to get here on a slow boat, but I already can't wait to find out what. And why!

s-l1600_1.thumb.jpeg.1ccc9f5a8dec675e2a2baf7058cc222c.jpeg

s-l1600_2.thumb.jpeg.a0e7ddf13d5a378dd4bc19e7382530b7.jpeg

 s-l1600.thumb.jpeg.8fb59d881b1b622f6960838ad41660d6.jpeg

 

s-l1600_3.jpeg

 

 

Edited by lexacat
Link to comment
Share on other sites

Haha yup! This is actually the third Mumbai Special (Delhi Delight!) I've bought. Funnily enough, the other two literally turned up today! I wasn't expecting them for another couple of weeks, but here they are. I'll upload some pics tonight.

Both Seiki 5's, one is actually fairly legit looking , the other is a complete basketcase that I can't wait to get into.

Also a Seiko Actus turned up in the mail (not from India) that l'm pretty sure is legit. Dial isn't in great shape but it's all period correct and the serial dates it to 1975. Once again, looking forward to opening it up.

Link to comment
Share on other sites

On 10/27/2022 at 9:56 PM, spectre6000 said:

Are any of these 404 contenders?

Sorry I didn't see your reply until just now! I stumbled across the 404 thread today. Sadly no, they wouldn't meet the criteria for that. I wish I knew where to get cheap watches from, even these complete garbage ones are ~$30.

I think I'm good for hobby watches now, but I wouldn't turn down some real cheap movements to add to the collection.
 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Unfortunately after much investigation, apparently the coil has been discontinued! Shall I get my service guy to try the solder or the conductive paint? 🎨 Final recommendation please🙏
    • Here are the pics of the bridge. Looks correct, but as soon as I screw on the rotor, the watch stops. Video here: https://1drv.ms/v/s!ArG5E62RGctxjokY5ws85BzuJLVakA   Pics. Might have figured it out. I have been working on this watch for a while and since I got it as a non runner in a terrible shape, there was no guarantee that parts were proper. I think the main screw that was used on the rotor was too long, so it was stopping the main train. As soon as I fished out a much shorter and larger headed screw, things were good again. Please celebrate with me.  
    • One-dip or naphtha should be safe, but are you sure it isn't magnetized?  I would also check that.  Although, if that balance is from an Elgin 760 0r 761, I would think it would have a hairspring of non-magnetic alloy.
    • Hi, Is there a spell check function available when you are posting ? Regards CJ
    • Hi John I just did a Seiko Lord-Matic a front loader without a split stem, I used a crystal lift to remove it, although I had to have it that tight I though I was going to break the lift before the crystal would budge. So I decided that the press would be a better option as I think crystals with tension rings resist a lot of compressing. I used a crystal press to repalce it and the bezel with no issues, obviuosly a different watch to the Omega. I just took my time and kept inspecting the installation progress bit by bit Regards CJ
×
×
  • Create New...