Jump to content

Recommended Posts

  • 2 weeks later...
Posted

watched it awhile back. tragic and fascinating at the same time. I have a few dollar watches that have the radium. I don't touch em and they sit in sealed plastic bags. you can really tell the difference when I hit them with a UV light. even some at 100 years old they light up like nothing we use today. I've been told you can work on them with gloves and a mask, in a well ventilated area. But to wash your hands and clothes after. nah. I'll just leave them where they're at to look at them. 

good flick. .

  • Like 2
Posted (edited)

I just Googled this topic and learned that "almost every watch between 1917 and the early 1970s used a form of radium paint", and that "the easiest way to tell if a watch is radioactive is to pick up a simple Geiger counter". However, the article also mentions other ways or hints to determine if a watch uses radium.

I didn't realize how dangerous radium is until I read the article and considering that many of the watches we enjoy working on are pre-1970s, I'm going to be more cautious in the future. 

Here's the article.

Edited by VWatchie
  • Like 2
Posted

It is true that our 'radium girls' developed cancer as a result of unknowingly ingesting quantities of radium. But 'other girls' have died from tobacco.

If you have a fine watch with a well preserved radium dial, such as my Longines cal 18.88Z,  relax a little and realse that you are in no danger unless you eat the dial.

Radium itself in the quantities used on dials does not glow. It was the incorporated fluorescent zinc sulphide that glowed. But over the years this has been degraded by the radiation. Perhaps into zinc oxide. I asked Dr. Roland Ranfft to do a little experiment by painting zinc sulphide onto the non-glowing ancient dial numbers and hands. The newly applied zinc suphide glowed giving the dial its original look. He now supplies activated zinc sulphide for anyone who is a good painter or who can outsource the work. Alternatively, the modern phosphors such as Luminova will also glow permanently, and more brightly than zinc sulphide, when applied to old radium dials. But the 'look' will be less authentic.

  • Thanks 1
Posted
46 minutes ago, Jack75 said:

 Other girls' have died from tobacco.

We are all different mate and all prone to different diseases depending on our genetics. Cancers , heart diseases, respiratory issues, overactive immune illnesses,  underactive immune illnesses,dementias etc, etc.  Its about edging your bets mate, if cancer runs in your family then smoking is going to run your risk that bit closer. If heart disease then try to eat a healthy diet. Only fair to state the obvious that one person can be more susceptible to radium effect than another person. Precautions should ALWAYS be taken when working on old radium dials, but the risk of the individual should always be down to the individual and not influenced in any way.

  • Like 1
Posted
14 hours ago, Jack75 said:

I asked Dr. Roland Ranfft to do a little experiment by painting zinc sulphide onto the non-glowing ancient dial numbers and hands.

So, was that done without first removing any of the old fluorescent zinc sulphides? I guess that goes without saying, but I thought I'd ask nevertheless.

  • 1 month later...
Posted

The old zinc sulphide is mixed with the radium and cannot itself be removed. The fresh zing sulphide was just layered on top of the old mixed lume.

On 10/28/2022 at 12:25 AM, Neverenoughwatches said:

We are all different mate ...

Thanks for the genetics lesson, but off topic.

Posted
22 minutes ago, Jack75 said:

The old zinc sulphide is mixed with the radium and cannot itself be removed. The fresh zing sulphide was just layered on top of the old mixed lume.

Thanks for the genetics lesson, but off topic.

🤔 I thought relavent 🙂

Posted

Sorry N-E-W, I was called away to dinner. What I was going on to say is that the radiation sensitivity to animals including humans (the LD50/30 - 50% die within 30 days) is species dependent (elephants are more sensitive than humans) but does not depend upon the genetic makeup of the animal. We can all safely wear radium watches whatever the condition of our hearts.

btw did the dog die?

  • Thanks 1
Posted
1 hour ago, Jack75 said:

Sorry N-E-W, I was called away to dinner. What I was going on to say is that the radiation sensitivity to animals including humans (the LD50/30 - 50% die within 30 days) is species dependent (elephants are more sensitive than humans) but does not depend upon the genetic makeup of the animal. We can all safely wear radium watches whatever the condition of our hearts.

btw did the dog die?

🤔 are you saying that we all react equally to radium ?. Interesting . Lol no the gorgeous husky is having a crazy moment,  eyes open and teeth showing. 😄 . I may be wierd at times but why would i have a photo of a dead husky for a profile picture 🤷‍♂️🤦‍♂️🙄.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Why do you think this is Fontainemelon ? 
    • Hi Watchrepairtalk, I have some questions about part sourcing I was hoping someone here might be able to help with. I'm working on an FHF 180 movement with a broken balance staff, broken regulator pins, and damaged cap jewels (both top and bottom). Some Googling says that this is similar to other FHF calibers like 150s, 160s, 180s and so on but I can't figure out what the functional difference is between these movements.  Is there any reason I wouldn't be able to acquire a donor FHF 150 or similar (with no shock protection) and use parts from that or would it be smarter to source replacements individually? Also are there any sources someone could recommend to get bulk cap jewels like this? Thank you for the help!
    • Hello and welcome to the WRT forum.
    • interesting video nice to see the machine what it can do now I wonder what it costs and I'm sure it's not in my budget. Plus the video brought up questions but the website below answers the questions? What was bothering me was the size of his machine 4 mm because I thought it was bigger than that? But then it occurred to me that maybe they had variations it looks like four, seven and 10. With the seven and 10 being the best because way more tool positions in way more rotating tools. Although I bet you all the rotating tools are probably separate cost https://www.tornos.com/en/content/swissnano   Then as we been talking about Sherline. Just so that everyone's aware of this they have another division their industrial division where you can buy bits and pieces. I have a link below that shows that just in case you don't want to have the entire machine you just need bits and pieces. https://www.sherline.com/product-category/industrial-products-division/   Let's see what we can do with the concept I explained up above and bits and pieces. For one thing you can make a really tiny gear very tiny like perhaps you're going to make a watch. Then another version the center part is not separate it is all machined from one piece. Then fills gear cutting machines have gone through multiple of evolutions. A lot of it based on what he wanted to make like he was going to make a watch unfortunately eyesight issues have prevented that. Another reason why you should start projects like this much sooner when your eyesight is really good or perhaps start on watches first and then move the clocks then local we have from the industrial division? Looks like two separate motors and heads. Then it's hard to see but this entire thing is built on top of a much larger milling machine as a larger milling machine gave a very solid platform to build everything.   Then like everything else that had multiple generations are versions the indexing went through of course variations like above is one version and the one below was the last version. Now the version below I mentioned that previously and somewhere in the beginning to discussion and somebody else had one in their picture. As it is a really nice precision indexing. Then I wasn't sure if I had a the watch photos here is his unfinished watch. No he wasn't going to make a simple watch like none of his clocks were simply either what would be the challenge and that.    
    • Use a Portwest Howie lab coat. They are the biological type so they have tapped cuffs so you don't end up getting the loose cuffs of normal lab coats catching everything. 
×
×
  • Create New...