Jump to content

Ho Chi Minh Watch Seek


Recommended Posts

Just happen to be in Vietnam this week for a few days, scouting around for watches.

90d034669ba62ae36ff8e235a35ded5f.jpg

Can't find anything of much interest, millions of fake but I'm more in old unique watches. There are many old Omega but a bit cautious on it since there are many old fake.

ceef7339a6ad2bb4c39d9b80eaaafe42.jpg

Few shops displaying these make to look old Crystal Ball "Omega" at USD 50 each before bargaining. I did not bargain because I think they are not genuine. When few shops selling same item, it can't be real antique.

6cd575ddb1401bdf1eacf8e3c7619eb1.jpg

Junk street in Saigon, not many watches. Mostly statues and porcelain.

999e051f26cbe3cd1eb4fd7c46e1f4f4.jpg

This Wittnauer watch they asking 4000000 dong about USD180, should not be that price.

443a44283a1f1104392b2fe2b43fbd5a.jpg

Any one has any tip or familiar with Ho Chi Minh do let me know where to look for watches here.

Being a Tourist in District 1 is not a good place for reasonable price vintage. I can pick up better watches back home or on ebay.

Some enthusiast advise me to be careful of Frankenwatchs or some called it "United Nation Watches" due to mixed and match parts even in a Rolex.

Sent from my SM-G900F using Tapatalk

  • Like 1
Link to comment
Share on other sites

Fascinating stuff, Affnan - it looks difficult (from the photographs) to tell the difference between real and fake!

Those in the photos are real old watches but the price are steep for the condition it is in. The fake are mostly Rolex, Omega and other high end branded watches. A Seiko chronograph I think those 6139 they are asking for about USD 250, that is too much for it, even if I bargain he would expect USD 200 for it. The most I value it at USD 100, as a Tourist in Vietnam it is not a good place for watches.

 

But all is not loss, the wife and kids are very happy.. clothing are dirt cheap.. :) at 1/3 the price back home.

Link to comment
Share on other sites

Welcome to Vietnam. I think its not a good idea buying vintage watches in strange place. Foreigner tourist are usually asked for much higher price. If you want to see, go to department stores. Also, here is a shop selling some luxury brands, mostly are used watches, address is 99 B Ly Tu Trong, Q1 ( District 1).

Link to comment
Share on other sites

I am from Malaysia and what I've found is that watches that have been local from new have been thru the hands of 'bodgers' with a lot of parts missing/wrong. Similar is found in watches from other Asian countries and Africa. Since I discovered ebay, I have more or less ceased buying watches locally unless they're priced too cheap to resist!.

 

One thing in particular is the case clamps (where originally fitted) are usually missing.... ?!?!

 

Anil

Link to comment
Share on other sites

I am from Malaysia and what I've found is that watches that have been local from new have been thru the hands of 'bodgers' with a lot of parts missing/wrong. Similar is found in watches from other Asian countries and Africa. Since I discovered ebay, I have more or less ceased buying watches locally unless they're priced too cheap to resist!.

 

One thing in particular is the case clamps (where originally fitted) are usually missing.... ?!?!

 

Anil

This is something for all of us to heed. Thanks for posting Anil.

Link to comment
Share on other sites

One of the easiest ways of telling a fake from the real thing would be the hands. The fakes always had cheap looking hands, not refined, if it came with a bracelet that would be a giveaway rough around the edges not a nice finish not what you would expect on high quality watches. I don't know about today as even with fakes I expect things have improved.  

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • The entry and exit stones have different impulse face angles  murks.
    • Depending on how much of the screw is left, you may be able to screw it further in and it may fall out of the hole that the dial foot sat in. To do this I rough up the tip of the good screw and screw it in, often the rough surface of the good screw and the rough surface on the broken screw get enough of a bite to transmit the torque into the broken section and force it out the other side. Like I said the size of the broken screw needs to be in your favor, but you never know you may get lucky.... or if you get it moving you may be able to then back it out with a screwdriver taking a bite on the rough surface. worth a try
    • I will try this weekend.  I've tried several times with my cell phone and it's just too small and recessed to get a good picture.  I need to get my macro lens and tripod out and then figure out how to get enough light down the hole in the side of the man plate to  actually show the top of the broken screw. I appreciate the effort and will try and get that pic this weekend.
    • Hello and welcome from Leeds, England. 
    • Hi,   My name is Simeon I am based in Sydney, Australia and have recently got into watch repair / watch making.  I am very much a learner having serviced multiple forgotten watches, some of which were actually successful!   I have a slowly growing collection of watches, mainly old Soviet, a few Japanese and (not pictured) some Raketas, a Poljot Alarm, an Omega Speedmaster Reduced and a vintage (1972) Tissot Seastar.  I like unloved vintage watches, with quirky faces and enjoy bringing them back to life through the simple(!) act of disassembly, clearing and reassembly. I am an Electrical Engineer who also undertook a trade apprenticeship so I am reasonably handy - It's fair to say, I know just enough to get myself in trouble. 
×
×
  • Create New...