Jump to content

Single Speed Or Variable Speed Polishing Machine


DJT2

Recommended Posts

Hi guys, I'm in the market to buy my first polishing machine. I'm wondering if there are any recommendations? I'd say I'd be comfortable with spending upto £275. I'm just getting a little confused on what spec would be the most beneficial for me. Ie.. Do I require 8", 1/2hp, 550watt, variable speed etc. Any help or advice would be welcome.

Link to comment
Share on other sites

No need to spend a lot of money buy the likes of this http://www.screwfix.com/p/scheppach-bg150-bench-grinder-150mm-240v/28349?kpid=28349&cm_mmc=Google-_-Product%20Listing%20Ads-_-Sales%20Tracking-_-sales%20tracking%20url&kpid=28349&cm_mmc=Google-_-Shopping%20-%20Power%20Tools-_-Shopping%20-%20Power%20Tools&gclid=CPX70uKA88UCFSkGwwod2XUA9gand fit with a set of these http://www.metalpolishingsupplies.co.uk/bench-grinder-polishing-spindle-adapter-set-1-2-12-5mm/?gclid=CNLNup2B88UCFQKK2wodm30AfQ

I have been using this setup for polishing metal for many years now, but I still prefer to refinish watches by hand to ensure there is no damage to edges and sharp profiles. Only very occasionally will I use a small buff on my Dremel.

Unless you are going to be polishing plastic, you don't really need a variable speed machine.

PS. I'm not saying to buy the above, they are only to illustrate the type of polishing system I use.

Link to comment
Share on other sites

No need to spend a lot of money buy the likes of this http://www.screwfix.com/p/scheppach-bg150-bench-grinder-150mm-240v/28349?kpid=28349&cm_mmc=Google-_-Product%20Listing%20Ads-_-Sales%20Tracking-_-sales%20tracking%20url&kpid=28349&cm_mmc=Google-_-Shopping%20-%20Power%20Tools-_-Shopping%20-%20Power%20Tools&gclid=CPX70uKA88UCFSkGwwod2XUA9gand fit with a set of these http://www.metalpolishingsupplies.co.uk/bench-grinder-polishing-spindle-adapter-set-1-2-12-5mm/?gclid=CNLNup2B88UCFQKK2wodm30AfQ

I have been using this setup for polishing metal for many years now, but I still prefer to refinish watches by hand to ensure there is no damage to edges and sharp profiles. Only very occasionally will I use a small buff on my Dremel.

Unless you are going to be polishing plastic, you don't really need a variable speed machine.

PS. I'm not saying to buy the above, they are only to illustrate the type of polishing system I use.

I must admit I've seen you mention that you generally hand polish watches & as I've only ever polished the sideboard before, I've looked for videos on you tube for hand polishing watches & can't find any. The only stuff I can find is with machine polishing. Hence getting the machine.
Link to comment
Share on other sites

I just have finished modifying dual table grinder from Lidl to adopt it as a polishing machine. It seems to be solid and not very expensive. Im not doing much polishing so for my needs its enough. I added speed control module to it (DIY kit for speed control from one of the shops with electronic stuff, I had to solder but that was fun). Module fit inside case of grinder and only change I had to do was drilling hole for knob for changing speed). I used connectors to put it into circuit so it can be back to original state at any moment, just unplug module and pug it back as it was. It runs quite nice, 200W its enough power, motor seems to run smooth and don't need any maintenance. I can use polishing wheel sized up to fi 15-20cm, up 30mm wide. only problem was getting wheels with proper hole size as it accepts 13mm, so I have to use adapter from 20mm/13mm. All together cost was about 40$ for the device. I can post pictures when I get home.

 

btw. speed control may be needed if felt wheel is used - too much speed and it can give you burn marks on metal.

Edited by Rafal
Link to comment
Share on other sites

I just have finished modifying dual table grinder from Lidl to adopt it as a polishing machine. It seems to be solid and not very expensive. Im not doing much polishing so for my needs its enough. I added speed control module to it (DIY kit for speed control from one of the shops with electronic stuff, I had to solder but that was fun). Module fit inside case of grinder and only change I had to do was drilling hole for knob for changing speed). I used connectors to put it into circuit so it can be back to original state at any moment, just unplug module and pug it back as it was. It runs quite nice, 200W its enough power, motor seems to run smooth and don't need any maintenance. I can use polishing wheel sized up to fi 15-20cm, up 30mm wide. only problem was getting wheels with proper hole size as it accepts 13mm, so I have to use adapter from 20mm/13mm. All together cost was about 40$ for the device. I can post pictures when I get home.

btw. speed control may be needed if felt wheel is used - too much speed and it can give you burn marks on metal.

Looking forward to seeing the pics. I was toying with trying the same thing, however I wasn't sure what size motor/watt & rpm I'd be looking for when purchasing.
Link to comment
Share on other sites

Here are the pictures. I believe Cousins sell cone shafts which could be used to attach polishing wheels. This is first draft and I plan to make improvements :). From behind, just by power cable, you could see knob for speed control. That was the only sensible place for it.

post-1017-0-12164600-1433352419_thumb.jp

post-1017-0-02525700-1433352425_thumb.jp

Edited by Rafal
Link to comment
Share on other sites

I'm with Geo, and pretty much have the same reference.  

 

The following related videos may come in handy for you too on how to prep your wheels.

 

Put the kettle on, they are 70+ minutes (combined).

 

 

Edited by SSTEEL
  • Like 1
Link to comment
Share on other sites

I'm with Geo, and pretty much have the same reference.

The following related videos may come in handy for you too on how to prep your wheels.

Put the kettle on, they are 70+ minutes (combined).

https://www.youtube.com/watch?v=2jnJe2jANms

https://www.youtube.com/watch?v=YMuWrI-sCj8

I've watched them & they are really informative. I even looked at buying the exact same Ray Foster bench polisher that was in the video £350 but just can't justify it at the moment.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I think we are about there, if there were still lots out there then the cost of a watch from 5 years ago would be around the same as it is now (allowing for inflation). Given that the price has gone up several times over we can only assume that supply cannot keep up with demand so we must be at or past peak supply, especially if the trend continues. I see even places like Australia, Ukraine and even South America are selling watches on eBay, picking over their stocks, mixed in with fakes and Frankenwatches etc.
    • I understand the demand bit, the generation below me 30ish are too technology engrossed to own a mechanical watch and they just dont like old stuff. I also consider myself at the getting on age of 57 to be a rare find of someone that likes old stuff, i did buy an almost 100 year old book yesterday titled " The New Modern Home " printed 1929.  Cost me a quid. What i was trying to work out is if we have reached a volume peak of watches being discovered hidden in the back of drawers.  Those watches that were hung onto until they entered the hands of the non sentimental generation. 
    • Even for myself who only started getting into watch repair/servicing during COVID I have seen a huge jump in watch prices - we have a 404 channel on this forum. When I started you could relatively easily find a watch on eBay to restore and put onto the channel, however this is now almost impossible and the only feasible solution is to buy a job lot with an average price <4.04. Even watches sold for parts/spares are 3 or four times the price of only a few years ago. Why - Either Demand must have increased in order to push up the price, or supply is reduced. I think it is a little of both, I think that most watches in the UK/US may have been picked over, which agrees with most of what @Neverenoughwatches says so supply of all kinds of vintage watches, including tat is dwindling. As a double whammy I think that more people are wanting watches, either to work on, or as a way to differentiate themselves from the Apple Watch and FitBit crowd. The upshot is that half decent watches that require restoration are now $500 instead of $100 and cheaper watches (Seiko 5 etc) are now $50 instead of $10, and even Mumbai Specials and garbage are now pushing $50 each. When - how long will this last, I think that most of the people who are returning to mechanical watches are those that have previously experienced life without them and want to return to something with a bit of personality that doesn't buzz every 10 seconds on your wrist and tell you how many steps you have done today. i.e. the 30-40+ generation. My son who is 17 has several mechanical watches but only wears one on a special occasion and is obviously only aware of them at all in part due to my hobby. I asked him the other day how many of his friends wear a watch and he told me that some use a smart watch but most just use their phones. So as I see it, demand will start to fall once the sub-thirty crowd start becoming the majority and/or the older amongst us stop buying watches and switch our attention to mobility scooters and trying to remember our bank password. Price - I think this is here to stay, even if demand does start to drop as the older generation becomes to decrepit and stops buying and the younger generation isn't interested in buying, supply will become progressively less as time goes on as more vintage watches become lost or broken beyond repair. I think the prices will plateau at some point as an equilibrium is reached as reduced demand is balanced with reduced supply, i.e. less and less people buying less and less watches. Sorry for the long ramble!
    • Hi. Use a PVA based glue, gorilla glue it dries transparent then do as advised by Old Hippy, smoothe down using very fine  0000 wire wool and either French polish or beeswax for a finish.
    • Hello and welcome to the forum.    Enjoy
×
×
  • Create New...