Jump to content

NAWCC convention

Levine98
 Share

Recommended Posts

Levine98 WRT Addict

Levine98

Posted
Posted

Hi,

 

any forum members plan on attending the annual NAWCC convention in Dayton OH? Would be great to connect with other US-based hobbyists in person. 
 

shoot me an msg if you’re going—levine98

nickelsilver Distinguished Member

nickelsilver

Posted
Posted

The NAWCC is primarily hobbiests. Amateurs. That they don't make a living* from watch/clockmaking doesn't mean they're slouches though- there are some extremely knowledgeable folks in the organization.

 

One of the great things is the meetups, which could be a local chapter, or a regional event, or bigger. The regional events and their "marts" are a great place to find tools and equipment, I got my first decent lathe at one last century.

 

The magazine is excellent, both in print quality and the level of effort that goes into the articles.

 

*many professionals are also members, but as far as I know they are the minority

  • Thanks 1
Levine98 WRT Addict

Levine98

Posted
  • Author
Posted
20 minutes ago, nickelsilver said:

The NAWCC is primarily hobbiests. Amateurs. That they don't make a living* from watch/clockmaking doesn't mean they're slouches though- there are some extremely knowledgeable folks in the organization.

 

One of the great things is the meetups, which could be a local chapter, or a regional event, or bigger. The regional events and their "marts" are a great place to find tools and equipment, I got my first decent lathe at one last century.

 

The magazine is excellent, both in print quality and the level of effort that goes into the articles.

 

*many professionals are also members, but as far as I know they are the minority

I’m a member and have found their forum to be useful with respect to pocket watch issues. That said, this forum is by far more interactive and tolerant when it comes to casual hobbyists.

My experience with the NAWCC forum, while helpful, is the membes skew older and more advanced re: a bit more serious and a little less forgiving of newer members who need to overcome big knowledge gaps. Just my impression, not slamming anyone, just my experience that they are less likely to come to the aid of younger folks new to watch repair.

grsnovi Distinguished Member

grsnovi

Posted
Posted
1 hour ago, Levine98 said:

is the membes skew older

Well, I see you have a white beard - so do I. How much older could they be? 🙂 

Levine98 WRT Addict

Levine98

Posted
  • Author
Posted
Just now, grsnovi said:

Well, I see you have a white beard - so do I. How much older could they be? 🙂 

Haha. I went to a local chapter meeting and all I can say is I’m 65 and was easily in the lower 5% of the age distribution. 

grsnovi Distinguished Member

grsnovi

Posted
Posted

Just plunked down $94. We'll see how it goes - but to answer your original question: I won't be going to Dayton. Maybe they'll have something out my way (although until my wife tells me that Covid is gone, she probably won't let me go anywhere).

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • donutdan
      Parts sourcing for FHF 180 movement

      By donutdan · Posted

      Hi Watchrepairtalk, I have some questions about part sourcing I was hoping someone here might be able to help with. I'm working on an FHF 180 movement with a broken balance staff, broken regulator pins, and damaged cap jewels (both top and bottom). Some Googling says that this is similar to other FHF calibers like 150s, 160s, 180s and so on but I can't figure out what the functional difference is between these movements.  Is there any reason I wouldn't be able to acquire a donor FHF 150 or similar (with no shock protection) and use parts from that or would it be smarter to source replacements individually? Also are there any sources someone could recommend to get bulk cap jewels like this? Thank you for the help!
    • Nucejoe
      Greetings from Whidbey Island.

      By Nucejoe · Posted

      Hello and welcome to the WRT forum.
    • JohnR725
      A lathe with indexing that won't break the bank?

      By JohnR725 · Posted

      interesting video nice to see the machine what it can do now I wonder what it costs and I'm sure it's not in my budget. Plus the video brought up questions but the website below answers the questions? What was bothering me was the size of his machine 4 mm because I thought it was bigger than that? But then it occurred to me that maybe they had variations it looks like four, seven and 10. With the seven and 10 being the best because way more tool positions in way more rotating tools. Although I bet you all the rotating tools are probably separate cost https://www.tornos.com/en/content/swissnano   Then as we been talking about Sherline. Just so that everyone's aware of this they have another division their industrial division where you can buy bits and pieces. I have a link below that shows that just in case you don't want to have the entire machine you just need bits and pieces. https://www.sherline.com/product-category/industrial-products-division/   Let's see what we can do with the concept I explained up above and bits and pieces. For one thing you can make a really tiny gear very tiny like perhaps you're going to make a watch. Then another version the center part is not separate it is all machined from one piece. Then fills gear cutting machines have gone through multiple of evolutions. A lot of it based on what he wanted to make like he was going to make a watch unfortunately eyesight issues have prevented that. Another reason why you should start projects like this much sooner when your eyesight is really good or perhaps start on watches first and then move the clocks then local we have from the industrial division? Looks like two separate motors and heads. Then it's hard to see but this entire thing is built on top of a much larger milling machine as a larger milling machine gave a very solid platform to build everything.   Then like everything else that had multiple generations are versions the indexing went through of course variations like above is one version and the one below was the last version. Now the version below I mentioned that previously and somewhere in the beginning to discussion and somebody else had one in their picture. As it is a really nice precision indexing. Then I wasn't sure if I had a the watch photos here is his unfinished watch. No he wasn't going to make a simple watch like none of his clocks were simply either what would be the challenge and that.    
    • Titanium
      Lab Coats

      By Titanium · Posted

      Use a Portwest Howie lab coat. They are the biological type so they have tapped cuffs so you don't end up getting the loose cuffs of normal lab coats catching everything. 
    • Titanium
      Chinese tools debate

      By Titanium · Posted

      Some of the Chinese tools ae great and can be purchased at a fraction of the price of Swiss ones, some are complete garbage and some I'm convinced are coming out the same factory as the branded ones.
×
×
  • Create New...