Jump to content

Greetings from sunny Southern California USA

Saldog

By Saldog
in Introduce Yourself Here

 Share

Recommended Posts

Saldog Member

Saldog

Posted
Posted

Hello and thanks to the forum for accepting my join request. I look forward to interacting with fellow watch lovers.

I have been fascinated with watches since I was in high school, circa late 70's. That's when I bought my first watch. Our family had a retail store selling mostly groceries but with some mercantile goods as well, including Seiko watches, believe it or not. All I knew of Seiko was what was in our single rotating display case, which was filled with quartz watches, mostly analog and a few digital ones. I knew little of what "made them tick" back then, but I was still fascinated with them. I have worn a watch on my wrist ever since then and did not stop when cell phones became the norm.

I didn't really appreciate mechanical watches until I was in my 30s, after I had worked in design engineering for about 10 years. My exposure to machine design in that time really allowed me to more appreciate just how special a watch is. I bought my first "nice" watch in the late 90s, an Omega Deville Prestige Automatic. I think I paid $900 for it from a shop in downtown Los Angeles. I went back downtown for a second Omega a few years after, this time getting a Seamaster Pro 300m Automatic, costing me $1400, a princely sum at the time. That watch is probably the finest one in my collection today. By the time I reached 40-something, I had the start of a collection, mostly of fairly inexpensive watches like Seikos, my first love.

For a while, I wore a couple of Apple watches and I really like them for their usefulness, but I got bored of those and went back to vintage watches, mostly Automatics but also manual winders, electronic hummers and early quartz watches. I never dared to do much to them other than replace a battery or a strap/bracelet.

It wasn't until the last year that I mustered the courage to actually try and make a watch that was not running run again. I was inspired by YouTubers like Mark Lovick and Marshall Sutcliffe, whose videos made it look much easier than I thought it would be. Of course, everything Mark does looks easy because he is so good at it and I know for sure I'll never be THAT good, but for simple things like disassembling, cleaning, and reassembling, I have had enough success that I have become hooked, with the hope that one day, I'll actually be able to do more advanced things like change a balance staff or a jewel or re-plate a case.

I'm still working full time in an unrelated line of work and a few years from retirement. I hope to be able to take this hobby more seriously one day. My wife is not enamored with my hobby or how I have taken over one end of the formal dining room table. I really need to find a more appropriate place to work and stash my tools and parts. Hopefully very soon.

If you've read down this far, wow, you really have too much time on your hands! Get a life FFS! Thanks for that though and see you around!

Dave S. "Saldog"

  • Like 1
Link to comment
Share on other sites
grsnovi Distinguished Member

grsnovi

Posted
Posted

Howdy Dave,

Made it all the way to the bottom. I'd rather see an intro like yours than one that just says: "thanks for letting me in"...

It's sunny this afternoon in Oregon too, I just mowed the lawn (I'm already retired). I have another Buren Grand Prix on the bench but haven't really spent any time on it yet (I had another previously that was cleaned and ready to re-assemble but I saw that the setting lever spring had broken between my disassembly and taking everything out of the wash). Of course, although they are both the same size they have different keyless works.

Anyway, welcome to WRT - it's a good place.

- Gary

  • Thanks 1
Link to comment
Share on other sites
Saldog Member

Saldog

Posted
  • Author
Posted
51 minutes ago, grsnovi said:

Howdy Dave,

Made it all the way to the bottom. I'd rather see an intro like yours than one that just says: "thanks for letting me in"...

It's sunny this afternoon in Oregon too, I just mowed the lawn (I'm already retired). I have another Buren Grand Prix on the bench but haven't really spent any time on it yet (I had another previously that was cleaned and ready to re-assemble but I saw that the setting lever spring had broken between my disassembly and taking everything out of the wash). Of course, although they are both the same size they have different keyless works.

Anyway, welcome to WRT - it's a good place.

- Gary

Thanks Gary! See you around.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Murks
      Pallet jewel

      By Murks · Posted

      Hi a have bunch pallets jewel here a want to replace it with a broken one how do a know witch is the entry stone or exit I know normally the exit one has a bigger locking corners ?
    • Jon
      Chinese clone demagnetizers

      By Jon · Posted

      I use on of these Eclipse demagnetisers. https://www.eclipsemagnetics.com/products/workholding-systems/table-top-demagnetiser/ I got fed up with those Mickey Mouse blue things and went industrial You can pick them up on eBay from between £70 to £100. They will demagnetise anything. I mean, anything, from a hairspring to a hammer head. The table is about 5 x 6 inches. You are not going to find anything close to being this good! It will demagnetise the biggest and chunkiest of cases with the movement inside. You'll never wonder again if your demagnetiser did the job.
    • nevenbekriev
      First Project Already A Bit "Sideways"

      By nevenbekriev · Posted

      Hi Dean, The solution with the alum for the broken screw is good and is generally used by watchmakers from many years, but You have to take off ALL steel parts from the plate. In some movements, the post for the minute wheel, for example, is made of steel. Deeping partly the plate works too, but some marks may left on the line where the solution doesn't cover the plate. Heating the solution is needed to accelerate the process. With the years, a rich collection of screws gathers and then finding the needed screw is not a problem. But till then it will be helpfull if You get some assorted screws lot. The other option is making screws. This is usually for the ones with specific form and sizes that doesn't meet often. But the skill of making screws is something that will never be unnecessary
    • Neverenoughwatches
      404 Club

      By Neverenoughwatches · Posted

      Haha yes you do have to reel in your bidding enthusiasm Michael. I use a " not enough time policy " to restrict myself or else known as sniper bidding. Decide what you are most prepared to bid and place it 7 seconds before the end, cross your fingers ,job done . The price paid here i would say was top  figure another day could have been $40
    • RichardHarris123
      Baum & Mercier

      By RichardHarris123 · Posted

      The question is did Baum and Mercier use that movement.  I know they used other ebouches. I  can't find any evidence that they didn't but that doesn't mean they didn't. 
×
×
  • Create New...