Jump to content

Help with information on Vietnam watches

Neverenoughwatches
 Share

Recommended Posts

Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted

Hi everyone . I have a friend that is interested in buying a watch associated with the Vietnam war. Either a genuine example or a typical example of a watch brand of that era. Would anyone have an idea of the brands that  may have been commission to American soldiers. Thank you.

LittleWatchShop Distinguished Member

LittleWatchShop

Posted
Posted
1 hour ago, Neverenoughwatches said:

Hi everyone . I have a friend that is interested in buying a watch associated with the Vietnam war. Either a genuine example or a typical example of a watch brand of that era. Would anyone have an idea of the brands that  may have been commission to American soldiers. Thank you.

This link might be helpful.

Nucejoe Distinguished Member

Nucejoe

Posted
Posted

 Every Iranian fighter pilot of  F-14 , F-4   and F-5   who bombed vietnam has a Brietling multicomplication pilot watch.

There should be around 350 of such limited editions exclusively made for said pilots.  I have seen one Wow, its absolutely gorgeous, I even got to wear it for a few seconds. Haha 

I don't know what watch did American pilots recieve. We know US airforce got F-14  when the fighting was over. 

I have heard a few of F-14  pilots flew commercial airlines in Canada. 

If your friend is wealthy and hunts one of these down, he might show off  this gloreous piece on WRT.  

 

 

 

 

  • Thanks 1
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
  • Author
Posted
4 hours ago, Nucejoe said:

 Every Iranian fighter pilot of  F-14 , F-4   and F-5   who bombed vietnam has a Brietling multicomplication pilot watch.

There should be around 350 of such limited editions exclusively made for said pilots.  I have seen one Wow, its absolutely gorgeous, I even got to wear it for a few seconds. Haha 

I don't know what watch did American pilots recieve. We know US airforce got F-14  when the fighting was over. 

I have heard a few of F-14  pilots flew commercial airlines in Canada. 

If your friend is wealthy and hunts one of these down, he might show off  this gloreous piece on WRT.  

 

 

 

 

Definitely thanks Nucejoe.  Im sure he would want something like this but so would i and unlikely  we would ever find him one. I think hes looking for more ground force troop's watches, a bit easier to come by. Appreciate the feedback though and something thats worth considering hes not short of a bob or two.

1 hour ago, LittleWatchShop said:

I have some A-11 and A-17 watches that served in WWII and Korean conflict.  A couple are still in the restoration phase...so many projects!

Sounds interesting thanks LWS, i love watches with some war history attached, well any history really. And would be nice to see and hear about your restorations of them when you get underway.. We did a little research into Vietnam watches and came up with a couple of options for ground soldiers. Most obvious  was the Captain Willard, but my friend doesnt really have the wrist size to carry a diver. What are the A 11  and   A 17 ?

LittleWatchShop Distinguished Member

LittleWatchShop

Posted
Posted
2 hours ago, Neverenoughwatches said:

Definitely thanks Nucejoe.  Im sure he would want something like this but so would i and unlikely  we would ever find him one. I think hes looking for more ground force troop's watches, a bit easier to come by. Appreciate the feedback though and something thats worth considering hes not short of a bob or two.

Sounds interesting thanks LWS, i love watches with some war history attached, well any history really. And would be nice to see and hear about your restorations of them when you get underway.. We did a little research into Vietnam watches and came up with a couple of options for ground soldiers. Most obvious  was the Captain Willard, but my friend doesnt really have the wrist size to carry a diver. What are the A 11  and   A 17 ?

Here is my thread on the a17

  • Thanks 1
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By VWatchie · Posted

      Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
    • MikeEll
      Help with repairing a quartz clock

      By MikeEll · Posted

      I've repaired a few of these, having some success with stripping and cleaning the mechanism.  They are so cheap though, its hardly worth the effort in many cases.
    • watchweasol
      Oldhippy

      By watchweasol · Posted

      Get well soon Old Hippy, torn muscles.,  not good
    • SwissSeiko
      A lathe with indexing that won't break the bank?

      By SwissSeiko · Posted

      Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • Poljot
      Broken watch stem in watch crown

      By Poljot · Posted

      If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
×
×
  • Create New...